3M Fibrlok 2670 Ribbon Construction Tool
$0.00
Availability:
Out of stock
SKU
1Q10
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
Request a Quote for
- 3M FibrLok 2670 Multi-Fiber Ribbon Construction Tool (BC# 20066)
- Tweezers
- Adhesive Tape
- Blade Assembly
- Hard Carrying Case
3M Fibrlok 2670 Multi-Fiber Optical Splicing System
The 3M Fibrlok Splice Preparation Kit 2600 Series provides the components required to assemble the multi-fiber splice. The 3M Fibrlok Ribbon Construction Tool 2670 provides organization and â??ribbonizingâ?? of individual 250 micron coated fibers prior to splicing. Fibrlok multi-fiber splice assembly tooling was designed to minimize the required tooling investment. These lightweight and portable tools are perfect for splicing in buried, underground, aerial, vault or pedestal splice locations.
Fibrlok is a universal mechanical splice which can be used wherever quick and secure splice connections are required. Assembly time is typically less than half a minute after preparing the fibre ends. The splice consists of a highly resistant plastic base, body and lid in which a metallic element provides the connection. The metal element with its three changeable areas, offset from one another by 120 degrees, surrounds the optical fibres to be connected and compensates for any differences in outer diameters. Fibres can be repositioned in the splice if required.
The universal splice utilises a single cleave length for both 250µm and 900µm coated fibres and has the ability to compensate for variations in fibre outer diameter for improved yield and performance. The splice can be used for both singlemode and multimode fibres with a 125µm diameter.
Applications:
Specifications:
For full 3M Fibrlok 2670 product specifications, please click here: 3M FIbrlok 2670
The 3M Fibrlok Splice Preparation Kit 2600 Series provides the components required to assemble the multi-fiber splice. The 3M Fibrlok Ribbon Construction Tool 2670 provides organization and â??ribbonizingâ?? of individual 250 micron coated fibers prior to splicing. Fibrlok multi-fiber splice assembly tooling was designed to minimize the required tooling investment. These lightweight and portable tools are perfect for splicing in buried, underground, aerial, vault or pedestal splice locations.
Fibrlok is a universal mechanical splice which can be used wherever quick and secure splice connections are required. Assembly time is typically less than half a minute after preparing the fibre ends. The splice consists of a highly resistant plastic base, body and lid in which a metallic element provides the connection. The metal element with its three changeable areas, offset from one another by 120 degrees, surrounds the optical fibres to be connected and compensates for any differences in outer diameters. Fibres can be repositioned in the splice if required.
The universal splice utilises a single cleave length for both 250µm and 900µm coated fibres and has the ability to compensate for variations in fibre outer diameter for improved yield and performance. The splice can be used for both singlemode and multimode fibres with a 125µm diameter.
Applications:
- Single-mode and multimode fibers
- Both construction and maintenance
- Aerial, buried, underground, pedastal
- Inside or outside buildings
- FTTx, metro and enterprise networks
- Up to 10 gigabit data rates
Specifications:
| Fiber diameter | 125 µm |
| Coating diameter | 250 µm; ribbon construction of individually coated fiber |
| Shelf life | 30 years |
| Mean insertion loss | <0.1 dB |
| Reflectance | <-35 dB from -40° to 80° C (-40° to 176° F) <-55 dB typical from -40° to 80° C (-40° to 176° F) when used with 2650-ACK Angled Cleaner Adapter <-60 dB typical at room temperature |
| Tensile strength | 1.0 lb. per individual fiber joint minimum; > 3.0 lb. per fiber joint typical |
| Material | Engineering thermoplastic with aluminum alloy element |
| Environmental Specifications | |
| Operating temperature | -40° to 80° C (-40° to 176° F) |
| Thermal cycling | Change in insertion loss <0.5 dB, -40° to 80° C (-40° to 176° F) |
| Fungus resistance | ASTM G-21 - 70; rating 0 |
| Vibration | EIA standard FOTP-11; test condition 1 |
| Water immersion | Seven days @ 60° C; change in Insertion loss <0.05 dB |
For full 3M Fibrlok 2670 product specifications, please click here: 3M FIbrlok 2670