AFL Noyes M310 Quad SM MM Fiber OTDR w/ PM VFL (M310-25U-01)
$5,839.00
Availability:
In stock
SKU
3P15
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Noyes M310 OTDR
Designed for Enterprise Network Testing, Troubleshooting and Documentation.
Rugged, lightweight and easy to hold, the M310 has a Touch and Test user interface that makes it easy for experts and novices to test and document fiber networks accurately and quickly. TruEvent technology enables M310 to provide superior event analysis capability for user to verify and troubleshoot even the most complex fiber network. LinkMap visualizes test results for easy and quick interpretation. With dynamic range up to 38 dB, and 16 hour battery run time, M310 provides complete Tier 1 insertion loss and Tier 2 OTDR testing. Using pre-set Industry ISO/TIA standards or user set Pass/Fail thresholds, technicians are alerted to installation problems and failures in easy-to-interpret event table. Pass/Fail event table and trace are displayed on the same screen for easy correlation.
LinkMap™
LinkMap with Pass/Fail simplifies network troubleshooting and enables even novice users to easily and accurately troubleshoot optical networks. LinkMap presents an icon-based view of the tested network clearly identifying fiber start, end, connectors, splices and macro-bends. A LinkMap Summary provides endto-end link length, loss, loss per distance and ORL. Loss and reflectance of detected events is compared to industry-standard or user-settable pass/fail thresholds and displayed with clear pass/fail indications. Users can easily toggle between LinkMap, Trace view, and Event Table.
TruEvent™
The M310’s TruEvent technology is the result of extensive research into the properties of fiber optic cable events and provides a new level of event detection accuracy and reliability in field test equipment. Taking full advantage of the unit’s short dead zone and adding improved event accuracy, this is the best performing OTDR for enterprise and data center applications. With the push of a single button, users can be confident of obtaining accurate locations and measurements of all events, without the confusing introduction of false events.
Testing and Inspection
The M310 is easy to use (Touch and Test®) and comes standard with an integrated source, power meter, visual fault locator, and inspection capability. No surprise ‘add-on’ charges for these commonly needed support functions.
Thousands of test results may be stored internally or on the supplied USB drive. Test results are transferable, via USB cable or USB drive, to a computer for viewing, printing, and analyzing with the supplied Windows® compatible TRM® 2.0 Basic Analysis and Documentation Software (Test Results Manager). The supplied TRM® 2.0 Basic is licensed for installation on up to 5 PCs. With the Advanced Analysis standard feature, customer will also receive one copy of TRM 2.0 Advanced.
Features:
Specifications:
For full Noyes M310 product specifications, please click here: Noyes M310
Designed for Enterprise Network Testing, Troubleshooting and Documentation.
Rugged, lightweight and easy to hold, the M310 has a Touch and Test user interface that makes it easy for experts and novices to test and document fiber networks accurately and quickly. TruEvent technology enables M310 to provide superior event analysis capability for user to verify and troubleshoot even the most complex fiber network. LinkMap visualizes test results for easy and quick interpretation. With dynamic range up to 38 dB, and 16 hour battery run time, M310 provides complete Tier 1 insertion loss and Tier 2 OTDR testing. Using pre-set Industry ISO/TIA standards or user set Pass/Fail thresholds, technicians are alerted to installation problems and failures in easy-to-interpret event table. Pass/Fail event table and trace are displayed on the same screen for easy correlation.
LinkMap™
LinkMap with Pass/Fail simplifies network troubleshooting and enables even novice users to easily and accurately troubleshoot optical networks. LinkMap presents an icon-based view of the tested network clearly identifying fiber start, end, connectors, splices and macro-bends. A LinkMap Summary provides endto-end link length, loss, loss per distance and ORL. Loss and reflectance of detected events is compared to industry-standard or user-settable pass/fail thresholds and displayed with clear pass/fail indications. Users can easily toggle between LinkMap, Trace view, and Event Table.
TruEvent™
The M310’s TruEvent technology is the result of extensive research into the properties of fiber optic cable events and provides a new level of event detection accuracy and reliability in field test equipment. Taking full advantage of the unit’s short dead zone and adding improved event accuracy, this is the best performing OTDR for enterprise and data center applications. With the push of a single button, users can be confident of obtaining accurate locations and measurements of all events, without the confusing introduction of false events.
Testing and Inspection
The M310 is easy to use (Touch and Test®) and comes standard with an integrated source, power meter, visual fault locator, and inspection capability. No surprise ‘add-on’ charges for these commonly needed support functions.
- Wave ID Source and Power Meter
- Enables multi-wavelength insertion loss testing with automatic wavelength synchronization, reducing test time and eliminating setup errors.
- Source with Tone Generation
- Use with Optical Fiber Identifier to reliably distinguish in-service fibers from out-of-service fibers carrying test tone.
- Visual Fault Locator
- Visibly locate far-end of specific fiber; precisely pinpoint macrobends or breaks in splice enclosures and cabinets.
Thousands of test results may be stored internally or on the supplied USB drive. Test results are transferable, via USB cable or USB drive, to a computer for viewing, printing, and analyzing with the supplied Windows® compatible TRM® 2.0 Basic Analysis and Documentation Software (Test Results Manager). The supplied TRM® 2.0 Basic is licensed for installation on up to 5 PCs. With the Advanced Analysis standard feature, customer will also receive one copy of TRM 2.0 Advanced.
Features:
- Industry leading TruEvent™ analysis
- LinkMap™ for easy results interpretation
- Short dead zones provide precise testing of closely spaced events
- Front Panel and First Connector Check
- Live fiber detection
- Inspection ready with DFS1 Digital FiberScope
- Integrated Source, Power Meter and VFL
- Enterprise network
- Data Center
- LAN/WAN
- Campus and military fiber networks and more
Specifications:
| OTDR | MULTIMODE | SINGLE-MODE |
| Emitter Type | Laser | Laser |
| Safety Class | Class I FDA 21 CFR 1040.10 and 1040.11; IEC 60825-1:2007-03 | Class I FDA 21 CFR 1040.10 and 1040.11; IEC 60825-1:2007-03 |
| Center Wavelengths | 850/1300 nm | 1310/1550 nm |
| Wavelength Tolerance | ±20/±30 nm | ±20/±30 nm |
| Launch Condition | Controlled Launch at 850 nm | N/A |
| Live Fiber Detection | Yes | Yes |
| Dynamic Range (SNR = 1) | 30/30 dB | 38/37 dB |
| Event Dead Zone | 0.8 m | 0.8 m |
| Attenuation Dead Zone | 2.5/2.7 m | 3.0 m |
| Pulse Widths | 5, 10, 30, 100, 300 ns, 1 µs, | 5, 10, 30, 100, 300 ns, 1, 3, 10 µs, 20 µs |
| Range Settings | 250 m to 30 km | 250 m to 240 km |
| Sampling Points | Up to 120,000 | Up to 120,000 |
| Minimum Data Point Spacing | 3 cm | 3 cm |
| Group Index of Refraction (GIR) | 1.4000 to 1.6000 | 1.4000 to 1.6000 |
| Distance Uncertainty/Accuracy | ±(1 +0.005 % x distance + data point spacing) | ±(1 +0.005 % x distance + data point spacing) |
| Linearity | ±0.05 dB/dB | ±0.05 dB/dB |
| Loss Threshold | 0.02 dB | 0.02 dB |
| Loss Resolution | 0.01 dB | 0.01 dB |
| Reflectance Range | 850 nm: -14 to -58 dB (typical) 1300 nm: -14 to -63 dB (typical) |
1310 nm -14 to -65 dB (typical) 1550 nm -14 to -65 dB (typical) |
| Reflectance Resolution | 0.01 dB | 0.01 dB |
| Reflectance Accuracy | ±2 dB | ±2 dB |
| Real Time Refresh Rate | >2 Hz | >2 Hz |
| Units | m, km, ft, kft, mi | |
| OTDR Modes | Full Auto, Expert, Real-Time | |
| Trace File Format | Bellcore GR-196 Version 1.1, Telcordia SR -4731 Issue 2 | |
| Trace File Storage Medium | Internal and USB | |
| Trace File Storage Capacity | >1000 internal, 1000s on USB | |
| Trace File Transfer to PC | USB | |
For full Noyes M310 product specifications, please click here: Noyes M310
AFL NOYES M310 Quad SM 1310 / 1550nm MM 850 / 1300nm Fiber OTDR w/ Power Meter & VFL
Dynamic Range:
850 / 1300 nm : 30 / 30 dB
1310 / 1550 nm : 38 / 37 dB
Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm
Visual Fault Locator
Includes Carrying Case & Accessories As Listed
M310 M 310 M300 M310-25U-01
Noyes M310 OTDR M 310 OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 39464-L/T*
- AFL Noyes M310-25U-01 Quad SM MM Fiber OTDR (BC# 39464-L/T*)
- SM OTDR Source:
- 1310nm
- 1550nm
- MM OTDR Source:
- 850nm
- 1300nm
- (2) SC Connectors For Source
- Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm
- SC Connector For Power Meter
- 1.25mm Connector For Power Meter
- 2.5mm Connector For Power Meter
- Visual Fault Locator
- SM OTDR Source:
- Noyes 5400-00-0202 Mandrel
- Noyes 5400-00-0201 Mandrel
- (2) MM SC-SC Fiber Optic Cables
- (2) SM SC-SC Fiber Optic Cables
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- Strap For M310 Unit
- Hard Carrying Case
Request a Quote for