Wavetek CLI-1450 kit with accessories

Wavetek JDSU CLI-1450 Signal Level & Leakage Meter

Wavetek CLI-1450 kit with accessories

Wavetek JDSU CLI-1450 Signal Level & Leakage Meter

Wavetek JDSU CLI-1750 CATV Cable Meter

$695.00
Availability: In stock
SKU
1M06

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Extensive testing shows that one of the main challenges to successfully offering new, digitally based services is the existing wiring in the customers home. Digital services, including audio, video, Internet, and telephony are less tolerant than traditional analog services of frequency response problems, reflections, group delay, and ingress caused by inferior componetry or poor craftsmanship. Will the existing wiring deliver the quality the customer demands? Should the network provider or homeowner plan to rewire when digital services are activated? You need tools to help answer these questions quickly and accurately because replacing wiring makes new service activation costs high, often limiting the acceptance of new services.

The Acterna CLI-1750, used in conjunction with the Model LST-1700 Signal Transmitter, helps identify and locate potential problems with the distribution network and home wiring prior to activating these new services. The Wavetek / Acterna CLI-1750 and Acterna / JDSU LST-1700 are compact home wiring testers capable of measuring not only routine power levels, but also digital average power, leakage,frequency domain reflectometry (FDR), and sweep, which can be useful for a wide range of trouble shooting from installation to characterizing existing wire. The instruments superior user interface and performance can reduce the installation time and repair cost.

 

Highlights:

  • Complete solution for installers eliminating the need for multiple meters or testers.
  • Combination signal level meter, leakage meter, and home wiring tester.
  • Easy-to-use, portable, and economical.
  • Comprehensive tests to verify the quality of an installation.
  • Icon-based user interface for ease of operation in all languages.

 

Applications:

  • Signal levels are checked to verify proper levels arriving at the tap and at the house.
  • Frequency response is measured to verify proper losses and to uncover any roll-off or sharp changes in response.
  • Frequency Domain Reflectometry test (FDR) reveals precise location of sources of reflections and degree of severity.
  • Reverse Ingress Scan test shows the presence of noise, or ingress, generated in the house that hampers reverse communication for all customers sharing the node.
  • Leakage test finds potential points of ingress, as the source may not be in operation while the installer is at the house.

 

Features:

  • Signal Scan mode shows all channel levels at once.
  • DigiCheck(TM) digital signal average power measurement option.
  • Sweep and FDR mode finds cable, component, and craftsmanship-related faults.
  • Frequency agile leakage detection and measurement.
  • Pass/fail check ensures FCC compliance and reduces subscriber call-backs.

CLI-1750 Specifications

Frequency

Range 5 to 890 MHz
Accuracy 10 ppm @ 25C (77F)
20 ppm over temp
Tuning Resolution 25 kHz


Level Measurement

Range -20 to +50 dBmV
Resolution 0.1 dB
Accuracy 0.75 dB Flatness,
0.75 dB Linearity @ 25C (77F)
Digital Average Power (optional) 2.0 dB (typical)


Scan Mode

Number of Channels 120
Scan Rate

Approximately 6 carriers/second


Leakage Mode

Level Measurement
Input Sensitivity (with HD-1 dipole or VMA-3 mag mount)
Video Detection From 1 µV with LT1000
Leakage Tagger activated
(121 to 133.2625 MHz).
CW Detection From 0.5 µV typical with LT1000
Leakage Tagger activated
(121 to 133.2625 MHz).
Measurement From 1.4 µV (115 to 140 MHz).
Range 0.5 to 2,000 µV (at input connector)
Accuracy
Measurement 1.5 dB @ 25C (77F)
Find & Fix 2.25 dB @ 25C (77F)
Tuning Carrier
Frequency Range 115 to 140 MHz range (Video)
Accuracy 10 ppm @ 25C (77F);
20 ppm over temp
Resolution 25 kHz
Tagger modulation for leakage Modulation frequency
5 to 25 Hz


Operating

Temp. Range -10 to +50C (14 to 122F);
3 dB drift, -10 to +50C
Water Resistance Meets or exceeds MIL-STD-810D
(Method 506.2)



For full Wavetek CLI-1750 product specifications, please click here: Wavetek CLI-1750
Wavetek JDSU Acterna CLI1750 Signal Level & Leakage CATV Cable Meter.

Acterna CLI-1750 CLI1750 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
  • Wavetek CLI-1750
  • Battery Pack
  • AC Adapter/Charger
  • User Manual On CD-ROM
  • Soft Carrying Case With Hook Clip
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!