JDSU HST-3000C Tester w/ CU/DDS-LL Module

Acterna HST-3000 Handheld Consumer Services Tester

Improving the installation, maintenance and troubleshooting of DSL services
operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In today?s market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operator?s entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures.

handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment.

For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing.

Highlights

• A combined tester for Copper and DSL testing
• Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration
• Modular hardware and software architecture is flexible and easily upgraded
• Laptop/PC integration via RS-232, USB, or wireless for easy results transfer
• Intuitive, easy-to-use GUI, lightweight, rugged and water resistant

Instrument Interface Specifications

• Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm ?mini-banana? jacks ADSL: 8-pin modular 10/100 BT Ethernet jack: 8-pin modular Serial port: DB9 female via cable (DCE) USB Host USB Device
• Bluetooth short-range wireless

ADSL Standards

• ANSI T1.413
• ITU G.992.
• 1 Annex A
• ADSL over POTS
• (G.DMT)
• G.992.2 (G.Lite)
• Cisco CAP

General Specifications

• Ruggedness: Survives 3-ft drop to concrete on all sides
• Water-resistance: Splash proof: may be used in heavy rain
• Language: English
• Keypad: Typical 12-button keyboard

Physical Specifications

• Size (H x W x D): 9.5 x 4.5 x 2.75 in
• Weight: 2.7 lb with battery
• Operating temperature: 22°F to 122°F
• Storage temperature: ?40°F to 150°F
• Battery life: 10 hrs. typical usage
• Charging time: 7 hours from full discharge to full charge
• Operating humidity: 10% to 80% relative humidity
• Storage humidity: 10% to 95% relative humidity
• Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight)

HST-3000 SIM CUDDS-LL Module

Quickly Qualify and Troubleshoot Local Loop Installation
DDS continues to provide a revenue stream for local loop services. However, installing DDS services at the customer?s premises can be extremely time-consuming and expensive. Technicians need to deploy and troubleshoot 4-wire DDS services effectively and efficiently, the first time. Meet these challenges with an easy-to-use, versatile test solution that reduces failures and repeat rates and enhances efficiency and ensures consistent test practices.

Service providers, end users, and manufacturers can use the high-quality, proven HST-3000 to qualify and install local-loop services. Automated setups and advanced testing features give the control needed to initiate faster service turn-up and maintenance, better workforce productivity, lower costs, and increased profitability.

Features:

• Test DDS rates from 2.4 to 64 kbps
• Field-portable solution for 4-wire DDS service testing

Test the Copper, Test the Service, Improve the Process

Equipped with the Copper Testing option and a copper Service Interface Module , the HST-3000 can quickly troubleshoot the local loop for line impairments that degrade or impair T1 performance. With the HST-3000, technicians can quickly identify and locate cable impairments: shorts, grounds, opens, crosses, bridged taps, wet sections and other high resistive faults. These impairments are easy to access with the HST-3000's advanced time domain reflectometer (TDR), precision digital volt/ohm meter (DVOM) and an accurate resistive fault locator (RFL) to pinpoint troubles prior to circuit installation. Copper test features are optimized for use anywhere on the local loop at the NID, cross box, pedestal, main distribution frame or anywhere a technician might gain access to the local loop to locate the source of trouble.

Test the Copper Test the Triple Play

• DVOM
• TDR
• Balance
• Loads
• Opens Complete copper testing to support VDSL/VDSL2 and triple-play deployments
• Expanded copper testing frequency range
  • Tx/Rx Tones ranging from 100 kHz to 30 MHz
  • Wideband Noise measurements from +15 to -90 dBm
  • Impulse Noise measurements from +15 to -60 dBm
  • Spectral analysis with spectral masks and band plans up to 30 MHz (-28 to -150 dBm/Hz)

Specifications:

For full JDSU HST-3000C CU/DDS-LL product specifications, please click here: JDSU HST-3000C CU/DDS-LL

JDSU HST-3000C HandHeld Consumer Services Tester w/
HST-3000 SIM CU/DDS-LL Copper DDS Local Loopback Module

INCLUDED MODULES:
- HST-3000 SIM CU/DDS-LL Module (Quickly Qualify and Troubleshoot Local Loop Installation)

Installed Options:
- Frame Relay
- User Scripting

Includes Carrying Case & Accessories As Listed

HST 3000C HST3000C

JDSU HST-3000C CU/DDS-LL HST3000C CU/DDS-LL Consumer Services Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 26394 26395

• Acterna HST-3000C HandHeld Consumer Services Tester (BC# 26394) With: 
  • Frame Relay
  • User Scripting
• Acterna HST-3000 SIM CU/DDS-LL Module (BC# 26395)
• Test Leads Set
• Acterna HST-000-084-02 Cable
• Ethernet Cable
• Battery Pack
• AC Adapter/Charger
• Power Cord
• User Manual On CD-ROM
• Carrying Case w/ Strap

Having trouble viewing this file? Click this link to download