Agilent N2644A-100 Cat6a Channel Adapter
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Agilent N2644A-100 Cat6a Universal Channel Adapter
The WireScope Pro uses test probes called SmartProbes to connect to the cabling runs that it certifies. All WireScope Pro test probes plug into the SmartProbe module slot at the top of the WireScope and DualRemote. The WireScope Pro automatically detects any SmartProbes connected to it, and configures its interface to the matching parameters.
The WireScope Pro displays a warning when it detects a potential conflict between the detected probe and any of the test settings. Using an inappropriate probe can affect measurement accuracy. This is especially important for category 6, 6A and 7 installations.
SmartProbes are used for testing copper cabling in Channel configurations.
Channel SmartProbes connect to the customer’s patch cords at the wall plate and telecommunications panel. The WireScope software compensates for the probe’s transmission characteristics so they do not affect test results.
Specifications:
| Measurement Parameter | Range | Resolution | Accuracy |
| Length | 0 – 100 m at NVP > 0.6 | 0.5 m at NVP = 0.7 | ± 1 m |
| Propagation Delay and Skew | 0 – 1100 ns | ±1 ns | ± 6 ns |
| Attenuation | 60 dB | 0.1 dB | If not otherwise mentioned, specifications are according to TIA Level IV definition |
| Near End Crosstalk (NEXT) | 90 dB | 0.1 dB | If not otherwise mentioned, specifications are according to TIA Level IV definition |
| Equal Level Far End Crosstalk (ELFEXT) | 90 dB | 0.1 dB | If not otherwise mentioned, specifications are according to TIA Level IV definition |
| Resistance | 5 – 1000 Ohm | 1 Ohm | ±5% |
| Network Specifications Cabling Standards | TIA/EIA-606-A and TIA/EIA-568-B Category 3 through 6A ISO/IEC 11801, EN 50173 and Australia/New Zealand Classes C, D, E and F UTP, STP and SCTP cabling IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T, 10GBASE-T IEEE 802.5 Token Ring and IBM Type 1 TP PMD interfaces |
||
| Supported Tests | Attenuation (Insertion Loss) Near End Crosstalk (NEXT) in pair-to-pair and/or PowerSum format Equal Level Far End Crosstalk (ELFEXT) Return Loss and Loop Resistance Wiremap Cable length, Total Propagation Delay and Delay Skew between pairs |
||
| General Specifications | |||
| Size: | 79.5 mm x 60.5 mm x 44 mm (3.1” x 2.4” x 1.7”), excluding cable | ||
| Operating Temperature: | 0°C to +40°C | ||
| Storage Temperature: | –40°C to +55°C | ||
For Use With Agilent WireScope PRO
(WireScope Pro Not Included In Sale!)
SmartProbes are used for testing copper cabling in Channel configurations
N26441A 100
Agilent N2644A-100 N2644A 100 Channel Adapter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 16555M
- Agilent N2644A-100 Cat6a Universal Channel Adapter (BC# 16555M)