Anritsu MS8911B HandHeld Spectrum Master Analyzer
$0.00
Availability:
Out of stock
SKU
6C112
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Request a Quote for
Anritsu MS8911B Spectrum Master
Anritsuメs high performance handheld digital broadcast field analyzer provides the broadcast professional the performance needed for the most demanding measurements in harsh RF and physical environments. Whether it is for spectrum monitoring, broadcast proofing, transmitter acceptance or regulatory compliance, the Spectrum Master is the ideal instrument for making fast and reliable measurements.
Features:
Specifications:
For full Anritsu MS8911B product specifications, please click here: Anritsu MS8911B
Anritsuメs high performance handheld digital broadcast field analyzer provides the broadcast professional the performance needed for the most demanding measurements in harsh RF and physical environments. Whether it is for spectrum monitoring, broadcast proofing, transmitter acceptance or regulatory compliance, the Spectrum Master is the ideal instrument for making fast and reliable measurements.
Features:
- Measure: Occupied Bandwidth, Channel Power, ACPR, C/I
- Dynamic Range: > 101 dB in 1 Hz RBW
- DANL: ヨ163 dBm in 1 Hz RBW
- Phase Noise: ヨ95 dBc/Hz @ 10 kHz offset at 1 GHz
- 1 Hz to 3 MHz Resolution Bandwidth (RBW)
- Traces: Normal, Max Hold, Min Hold, Average, # of Averages
- Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
- Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
- Limit Lines: up to 40 segments with one-button envelope creation
Specifications:
Spectrum Analyzer | ||||
Measurements | ||||
Smart Measurements | Field Strength (uses antenna calibration tables to measure dBm/m2 or dBmV/m) Occupied Bandwidth (measures 99% to 1% power channel of a signal) Channel Power (measures the total power in a specified bandwidth) ACPR (adjacent channel power ratio) AM/FM/SSB Demodulation (wide/narrow FM, upper/lower SSB), (audio out only) C/I (carrier-to-interference ratio) Emission Mask (recall limit lines as emission mask) |
|||
Setup Parameters | ||||
Frequency | Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel # | |||
Amplitude | Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection | |||
Span | Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span | |||
Bandwidth | RBW, Auto RBW, VBW, Auto VBW, RBW/VBW, Span/RBW | |||
File | Save, Recall, Delete, Directory Management | |||
Save/Recall | Setups, Measurements, Limit Lines, Screen Shots Jpeg (save only), Save-on-Event | |||
Save-on-Event | Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All | |||
Delete | Selected File, All Measurements, All Mode Files, All Content | |||
Directory Management | Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB CF, Copy | |||
Application Options | Impedance (50 O, 75 O, Other) | |||
Sweep Functions | ||||
Sweep | Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type | |||
Detection | Peak, RMS, Negative, Sample, Quasi-peak | |||
Triggers | Free Run, External, Video, Change Position, Manual | |||
Trace Functions | ||||
Traces | Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations | |||
Trace A Operations | Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace) | |||
Trace B Operations | A? B, B??C, Max Hold, Min Hold | |||
Trace C Operations | A ? C, B??C, Max Hold, Min Hold, A ヨ B ? C, B ヨ A ? C, Relative Reference (dB), Scale | |||
Marker Functions | ||||
Markers | Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers, Marker Table (On/Off), All Markers Off | |||
Marker Types | Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker | |||
Marker Auto-Position | Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel, Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level | |||
Marker Table | 1-6 markers frequency and amplitude plus delta markers frequency offset and amplitude | |||
Limit Line Functions | ||||
Limit Lines | Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit | |||
Limit Line Edit | Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right | |||
Limit Line Move | To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1 | |||
Limit Line Envelope | Create Envelope, Update Amplitude, Number of Points (41), Offset, Shape Square/Slope | |||
Limit Line Advanced | Type (Absolute/Relative), Mirror, Save/Recall | |||
Frequency | ||||
Frequency Range | 9 kHz to 7.1 GHz (usable to 0 Hz) | |||
Tuning Resolution | 1 Hz | |||
Frequency Reference | Aging: ± 1.0 ppm/10 years Accuracy: ± 0.3 ppm (25 °C ± 25 °C) + aging | |||
Frequency Span | 10 Hz to 7.1 GHz including zero span | |||
Span Accuracy | Same as frequency reference accuracy | |||
Sweep Time | 10 µs to 600 seconds in zero span, autoset in non-zero span | |||
Bandwidth | ||||
Resolution Bandwidth (RBW) | 1 Hz to 3 MHz in 1ヨ3 sequence ±10% (1 MHz max in zero-span) (ヨ3 dB bandwidth) | |||
Video Bandwidth (VBW) | 1 Hz to 3 MHz in 1ヨ3 sequence (ヨ3 dB bandwidth) | |||
RBW with Quasi-Peak Detection | 200 Hz, 9 KHz, 120 kHz (ヨ6 dB bandwidth) | |||
VBW with Quasi-Peak Detection | Auto VBW is On, RBW/VBW = 1 | |||
Spectral Purity | ||||
SSB Phase Noise | ヨ100 dBc/Hz @ 10, 20 and 30 kHz offset from carrier ヨ102 dBc/Hz @ 100 kHz offset from carrier |
|||
Amplitude Ranges | ||||
Dynamic Range | > 95 dB at 600 MHz, 2/3 (TOI-DANL) in 1 Hz RBW > 96 dB at 3.5 GHz, 2/3 (TOI-DANL) in 1 Hz RBW |
|||
Measurement Range | DANL to +30 dBm | |||
Display Range | 1 to 15 dB/div in 1 dB steps, ten divisions displayed | |||
Reference Level Range | ヨ120 dBm to +30 dBm | |||
Attenuator Resolution | 0 to 65 dB, 5.0 dB steps | |||
Amplitude Units | Log Scale Modes: dBm, dBV, dBmv, dBµV Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW | |||
Amplitude Accuracy (Power level >-50 dBm) | ||||
Preamp Off | Preamp Off | Preamp Off | Preamp On | |
(Input attenuation) | (= 35 dB) | (40 to 55 dB) | (60 to 65 dB) | (0 or 10 dB) |
9 kHz to =10 MHz | ± 1.50 dB | ± 1.50 dB | ± 1.50 dB | - |
100 kHz to 4 GHz | - | - | - | ± 1.50 dB |
>10 MHz to 4 GHz | ± 1.25 dB | ± 1.75 dB | ± 1.75 dB | - |
>4 GHz to 6.5 GHz | - | ± 1.75 dB | ± 1.75 dB | - |
>4 GHz to 7.1 GHz | ± 1.75 dB | - | - | ± 1.75 dB |
>6.5 GHz to 7.1 GHz | - | ± 2.00 dB | ± 3.00 dB | - |
Displayed Average Noise Level (DANL) | ||||
Preamp Off (Reference level -20 dBm) | Preamp On (Reference level -50 dBm) | |||
(DANL in 1 Hz RBW, 0 dB attenuation) | Maximum | Typical | Maximum | Typical |
10 MHz to 1 GHz | ヨ137 dBm | ヨ140 dBm | ヨ161 dBm | ヨ163 dBm |
> 1 GHz to 2.2 GHz | ヨ133 dBm | ヨ136 dBm | ヨ159 dBm | ヨ160 dBm |
> 2.2 GHz to 2.8 GHz | ヨ126 dBm | ヨ130 dBm | ヨ153 dBm | ヨ156 dBm |
> 2.8 GHz to 4 GHz | ヨ136 dBm | ヨ139 dBm | ヨ159 dBm | ヨ160 dBm |
> 4 GHz to 7.1 GHz | ヨ127 dBm | ヨ131 dBm | ヨ154 dBm | ヨ158 dBm |
Spurs | ||||
Residual Spurs | Preamp On (RF input terminated, 0 dB input attenuation) ヨ100 dBm. 10 MHz to 7.1 GHz Preamp Off (RF input terminated, 0 dB input attenuation) ヨ90 dBm, 100 kHz to 3.2 GHz ヨ84 dBm, > 3.2 GHz to 7.1 GHz |
|||
Exceptions | ヨ85 dBm @ 250, 300, 350 MHz ヨ80 dBm, ヨ90 dBm typical @ リ 4010 MHz ヨ70 dBm, ヨ83 dBc typical @ リ 5084 MHz ヨ75 dBm, ヨ87 dBm typical @ リ 5894 MHz ヨ80 dBm, ヨ92 dBm typical @ リ 7028 MHz |
|||
Input-Related Spurious | (0 dB attenuation, -30 dBm input, span < 1.7 GHz, carrier offset > 4.5 MHz) ヨ60 dBc, ヨ70 dBc typical | |||
Exceptions | ヨ38 dBc, ヨ48 dBc typical @ 1674 MHz | |||
Third-Order Intercept (TOI) (ヨ20 dBm tones 100 kHz apart, ヨ20 dBm Ref level, 0 dB input attenuation, preamp off) | ||||
600 MHz | +7 dBm | |||
3.5 GHz | +9.5 dBm | |||
50 MHz to 300 MHz | > +8 dBm typical | |||
> 300 MHz to 2.2 GHz | > +10 dBm typical | |||
> 2.2 GHz to 2.8 GHz | > +15 dBm typical | |||
> 2.8 GHz to 4 GHz | > +10 dBm typical | |||
> 4 GHz to 7.1 GHz | > +13 dBm typical | |||
Second Harmonic Distortion (0 dB input attenuation, ヨ30 dBm input, preamp off) | ||||
50 MHz to 1.4 GHz | ヨ50 dBc | |||
> 1.4 GHz to 2 GHz | ヨ70 dBc | |||
> 2 GHz | ヨ80 dBc | |||
VSWR | ||||
> 10 dB input attenuation | 2.0:1 max, 1:5:1 typical | |||
General Specifications | ||||
Maximum Continuous Input | (= 10 dB input attenuation) +30 dBm | |||
Input Damage Level | = 10 dB input attenuation, > +43 dBm, ± 50 Vdc. Input protection relay opens at > 30 dBm < 10 dB input attenuation, > +23 dBm, ± 50 Vdc. Limited dV/dt. Input protection relay opens at approximately 10 to 23 dBm |
|||
ESD Damage Level | (= 10 dB input attenuation) > 10 kV | |||
External Reference Frequencies | 1 MHz, 1.2288 MHz, 1.544 MHz, 2.048 MHz, 2.4576 MHz, 4.8 MHz, 4.9152 MHz, 5 MHz, 9.8304 MHz, 10 MHz, 13 MHz and 19.6608 MHz at ヨ10 dBm to +10 dBm | |||
Setup Parameters | ||||
System | Status (Temperature, Battery Info, S/N, Firmware Ver, IP Address, Options Installed) Self Test, Application Self Test | |||
System Options | Name, Date and Time, Ethernet Configuration, Brightness, Volume Language (English, French, German, Spanish, Chinese, Japanese, Korean, Italian, User defined) Reset (Factory Defaults, Master Reset, Update Firmware) | |||
File | Save, Recall, Delete, Directory Management | |||
Save/Recall | Setups, Measurements, Screen Shots Jpeg (save only) | |||
Delete | Selected File, All Measurements, All Mode Files, All Content | |||
Directory Management | Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB | |||
Internal Trace/Setup Memory | > 13,000 traces | |||
External Trace/Setup Memory | Limited by size of USB Flash drive or Compact Flash module | |||
Mode Switching | Auto-Stores/Recalls most recently used Setup Parameters in the Mode | |||
Connectors | ||||
RF In | Type N, female, 50 O, Maximum Input +30 dBm, ± 50 VDC | |||
GPS | BNC, female, reverse polarity | |||
External Power | 5.5 mm barrel connector, 12 to 15 VDC, < 5.0 Amps | |||
LAN Connection | RJ48C, 10/100 Mbps, Connect to PC or LAN for Remote Access | |||
USB Interface (2) | Type A, Connect Flash Drive and Power Sensor | |||
USB Interface | 5-pin mini-B, Connect to PC for data transfer | |||
Headset Jack | 2.5 mm barrel connector | |||
External Reference In | BNC, female, 50 O, Maximum Input +10 VDC | |||
Reference Out | BNC, female, 50 O, 10 MHz | |||
Display | ||||
Size | 8.4ヤ | |||
Resolution | 800 x 600 | |||
Battery | ||||
Type | Li-Ion | |||
Battery Operation | 2.5 hours, typical | |||
Electromagnetic Compatibility | ||||
European Union | CE Mark, EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC and Low Voltage Directive 73/23/EEC, 93/68/EEC | |||
Australia and New Zealand | C-tick N274 | |||
Interference | EN 61326-1 | |||
Emissions | EN 55011 | |||
Immunity | EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-11 | |||
Safety | ||||
Safety Class | EN 61010-1 Class 1 | |||
Product Safety | IEC 60950-1 when used with Company supplied Power Supply | |||
Environmental | ||||
Operating Temperature | ヨ10 ºC to 55 ºC | |||
Maximum Humidity | 85% | |||
Shock | MIL-PRF-28800F Class 2 | |||
Storage | ヨ51 ºC to 71 ºC | |||
Altitude | 4600 meters, operating and non-operating | |||
Size and Weight | ||||
Size | 315 mm x 211 mm x 77 mm, (12.4 in x 8.3 in x 3.0 in) | |||
Weight | 3.1 kg, (6.9 lbs) typical |
For full Anritsu MS8911B product specifications, please click here: Anritsu MS8911B
Anritsu MS8911B HandHeld Spectrum Master Analyzer
Installed Options:
- Option 30: ISDB-T Measurements
- Option 32: ISDB-T SFN Field Measurements
Frequency Range: 9 kHz to 7.1 GHz
Includes Carrying Case & Accessories As Listed
MS8911
Anritsu MS8911B Spectrum Master Analyzer MS-8911B Spectrum Master Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 21756
- Anritsu MS8911B Spectrum Master w/ Options (BC# 21756)
- Option 30: ISDB-T Measurements
- Option 32: ISDB-T SFN Field Measurements
- Armored Test Port Cable
- (2) BNC To BNC Cables
- Ethernet Cable
- 128MB Flash Card
- DC Car Charger
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- User Manual On CD-ROM
- Carrying Case (G)