Anritsu MT9081D SM ACCESS OTDR 1310nm 1550nm
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
The MT9080 Series ACCESS Master is provided with the functions that are required to perform diagnosis of optical fibers fault on optical fiber lines, specifically FTTH lines.
Table 1.1-1 MT9080 Series ACCESS Master functions
Function | Characteristics | Usage | |
<1> | Optical Pulse Testing (OTDR: Optical Time Domain Reflectometer) |
Wavelength: 1.31/1.55/1.65 µm SM (The wavelength varies depending on the model.) Fresnel event dead zone: 1 m Fault Locate and Trace Analysis modes |
Breaking point, splice loss, fiber loss, and distance measurement |
<2> | Optical Power Meter (OPM: Optical Power Meter) |
Measurement range: -50 to -5 dBm, Accuracy of measurement: ±6.5% |
Communication light power level measurement |
<3> | Fiber Identification Light Source (OLS: Optical Light Source) |
Optical output: > -8 dBm Modulation frequency: CW / 270 Hz/1 kHz/2 kHz, Wavelength: 1.31/1.55/1.65 µm (The wavelength varies depending on the model.) |
Optical light source for fiber identification equipment (ID tester) |
<1> Optical Pulse Testing (OTDR)
Capable of measuring the connection loss, fiber loss, and distance of an optical fiber line. You can find the fault position of a breakage. This function works in two modes: Fault Locate and Trace Analysis. In both modes, the function automatically detects event positions such as splice points with loss exceeding the preset threshold or return loss, and lists the data in an event table. In the Fault Locate mode, possible fault points of the detected events are also listed at the upper right corner of the screen
<2> Optical Power Meter (OPM)
Capable of measuring the optical power level. By measuring the communication light power level in the customerメs system, you can easily decide whether the fault point is on the optical fiber or network.
<3> Optical Light Source (OLS) for Fiber identification
Available as the light source for fiber identification equipment (ID tester). CW light or modulation light of 270 Hz/1 kHz/2 kHz is output. (CW light is available for the MT9081x only.)
<4> Visible Light Source (VLD)
Works as the visible light source by means of a red laser diode. Available for visual fiber identification by visual means, fiber identification by bending, detection of breaking points within the OTDR dead zone, and other purposes.
<5> IP Network Connectivity
Check Function PPPoE connection check, Ping test, trace route test, download throughput measurement, throughput measurement, and counter measurement are available by connecting to an Ethernet interface (10/100/1000Base-T) such as ONU. Refer to the MT9080 Series ACCESS Master IP Network Connectivity Check Function Operation Manual for details.
Key Character Displays (Option 009 English)
These designate the language in which characters are represented on the key panel.
Item | Specifications |
Optical power meter (OPM) function |
|
Applicable fiber | SM fiber (ITU-T G.652) |
Wavelength setting | MT9080A/B/D (1310/1550 nm port): 1310/1550/1625/1650 nm |
Optical connector | Shared with OTDR |
Optical power measurement range | -50 to -5 dBm (peak power) Wavelength: 1550 nm absolute maximum rated input: +10 dBm |
Measurement accuracy | ±6.5% (-20 dBm, CW light, 23°C ±2°C, after executing zero offset, Wavelength: 1550 nm) |
Other functions |
|
Display | 6.2-inch monochrome LCD (Option 04, 640 × 480 dots, with backlight, semi-transparent) |
Interface | USB 1.1 Type A × 1 (memory) Type B × 1 (USB mass storage class; the internal memory of the MT9080 series product can be read/written as a PC disk drive by connecting with the PC via a USB cable.) |
Laser safety | 21CFR Class I IEC Pub 60825-1 Class 1 |
Item | Specifications | Remarks |
Power supply | DC: 10.8 to 15 V AC: Rating: 100 to 240 V Allowable input voltage range: 90 to 264 V Rated frequency: 50/60 Hz (when using the dedicated AC adapter) Battery pack: DR15SBA available |
|
Power consumption | 20 W max. (when charged) Standard 5 W (with backlight Off, sweeping halted) |
|
Battery operating time | Continuous operating time: 6.5 hours (typical) | * With backlight Off, sweeping halted, at 25°C |
Battery charging time | 3 hours or shorter | With power Off, temperature range: 0 to +30°C |
Dimensions (excluding protrusion) |
254 (W) × 162 (H) × 61 (D) mm | |
Mass | 2 kg or less 2.2 kg or less |
Main body only, excluding options Including battery pack, excluding options |
Environmental conditions | ||
Operating temperature, humidity |
0 to +40°C, =85% (=80% when using AC adapter) During battery charge: 0 to 30°C (power Off) |
No condensation |
Storage temperature, humidity |
-20 to +60°C, =85% | |
Vibration | Conforms to MIL-T-28800E Class 3 | |
EMC | EN61326: 1997/A2: 2004 (Class A) EN61326: 1997/A2: 2004 (Annex A) |
Anritsu MT9081D Access Master Singlemode 1310 / 1550nm Fiber OTDR With Power Meter
Dynamic Range:
SM 1310 / 1550 nm : 38 / 36.5 dB
Installed Option:
- Option 009: Key Character Display (English)
Power Meter:
- 1310nm
- 1550nm
- 1625nm
- 1650nm
Includes Carrying Case & Accessories As Listed
MT9080 MT 9081 MT 9081D
Anritsu MT9081D Access Master MT-9081D OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 20784
- Anritsu MT9081D Access Master SingleMode OTDR w/ Option (BC# 20784)
- Option 009: Key Character Display (English)
- SM OTDR Source:
- 1310nm
- 1550nm
- Power Meter:
- 1310nm
- 1550nm
- 1625nm
- 1650nm
- SC Connector For Power Meter
- SM SC-SC Fiber Cable
- (4) Fiber Optic Wipes
- Battery Pack
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Carrying Case (G)