Bird SA-2000 Cable & Antenna Site Analyzer
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
The Bird Site Analyzer is a multifunction test instrument for use in installation and maintenance of wireless systems. Antenna systems are tested by using a Site Analyzer to measure match conditions. Data is graphed at 238 points across a user-specified frequency band or distance range. Transmitter systems are tested by using a Site Analyzer and a Bird power sensor to measure RF power. Data is displayed as power or match efficiency, depending on the sensor.
Features
- Easy operation for first-time, occasional or experienced users
- Digital Power meter option compatible with Bird power sensors
- Accurate and repeatable measurements
- Immunity to on-channel interference (+13 dBm) for testing at co-located antenna sites
- High-resolution color display
- Fast sweep rate
- On-screen comparison of live sweep and recalled trace
- Unlimited trace overlays per report to compare antennas and track performance over time
- Display forward and reflected power as well as VSWR and return loss.
- Compatible with Model 5010 Digital Power Sensor and DPM Elements
- Locate long range problems with 238 display points
- Pinpoint small problems with 60 dB dynamic range
- High resolution marker reports VSWR with the precision of expensive laboratory equipment
- Perform cable insertion loss measurements
- Flash feature allows easy firmware upgrades via e-mail
The Site Analyzerﾒs advanced design and high resolution color display help you detect minor problems before they become major headaches. Birdﾒs instrument easily uncovers faults that elude less sophisticated testers. And the Site Analyzerﾒs high directivity and low source match ensure accurate and repeatable Match and Fault Location measurements.
Specifications:
- FREQUENCY CHARACTERISTICS
- Frequency Range: 806 - 2000 MHz
- Trace Resolution: 238 data points
- MEASUREMENT CHARACTERISTICS
- Return Loss: 0 to -60 dB
- Test Port: N-type female connector
- Impedance: 50 O
- Speed: 1 multi-frequency scan/4 seconds
- Immunity to Interfering Signals: Rejects on-channel signals up to +13 dBm.
- Maximum Input Signal: +22 dBm
- PERIPHERAL PORTS
- Data transfer: 9-pin RS-232 (DB9), compatible with PC serial port.
- Printer: 25-pin (DB25) parallel. Built-in driver.
- POWER
- Internal: Rechargeable (fast charge) Li-Ion batteries. 3 hour minimum operating time. Auto shut-off conserves battery life.
- External DC: 9 to 16 Vdc, fused
- External AC: 90 to 264 Vac, 45-66 Hz
- ENVIRONMENTAL
- Operating Temperature: -10° to 50° C (14° to 122° F)
- Storage Temperature: -40° to 80° C (-40° to 176° F)
- Humidity: 95% ±5% max., (non-condensing)
- Altitude: Up to 15,000 feet (4572 m)
- FORM FACTOR
- Dimensions: Hand held not to exceed 24 linear inches.
- Weight: 5 lb (2 kg)
For full BIRD SA-2000 product specifications, please click here: BIRD SA-2000
BIRD SA-2000 Cable & Antenna Analyzer
806 MHz to 2000 MHz Frequency Range
Ideal for today's cellular and microwave systems!
Includes Eagle CKT050A Open/Short/Load Calibration Kit, Carrying Case & Accessories As Listed
SA 2000 SA2000
BC# 15150
- BIRD SA-2000 Site Analyzer (BC# 15150)
- Frequency Range: 806 - 2000MHz
- Armored Test Port Cable
- Eagle CKT050A Open/Short/Load Calibration Kit w/ Case
- Male To Male Connector
- Female To Female Connector
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Carrying Case w/ Strap