Siecor OS-850V optical source with fiber cables

Siecor Corning OS-850V Optical Light Source 850nm

Agilent 8140A kit with accessories

Agilent HP 8140A Optical Loss Tester 81412A 81401A

NOYES OLS2 Dual SM Source OFI200B Fiber Identifier

$0.00
Availability: Out of stock
SKU
4P18

Condition: Refurbished

Warranty: 90 Day Exchange

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

NOYES OLS2-DUAL Optical Source
The OLS2-Dual laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be
used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.
The OLS2-Dual features 1310 nm and 1550 nm (or 1550 nm and 1625 nm) LASER output from a single output port and is easy to operate. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence.
The OLS2-Dual output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned.
In addition to being powered by two AA alkaline batteries, the OLS2-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OLS2-Dual is fully N.I.S.T. traceable.

Features
? Rugged, handheld, lightweight
? Dual wavelengths from a single port
? Certify single-mode links per TIA/EIA standards
? Dual Wave ID, single Wave ID, CW, and modulated Tone
? 270 Hz, 330 Hz, 1 kHz, and 2 kHz supported Tone (2 kHz default)
? AA alkaline, optional rechargeable NiMH battery pack or AC adapter
? Long battery life
? Low battery indicator
? Adjustable output
? Cost-effective, easy to use
? N.I.S.T. Traceable

Applications
? The OLS2-Dual may be substituted for terminal equipment in the central office or head end to provide a stable output for loss measurements.
? For single-mode applications, such as Telecom or CATV, the OLS2-Dual may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 and 1550 nm.
? In the modulation Tone mode, the OLS2-Dual generates a Tone signal into the fiber. This signal is detected by the OFI-200, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.

Optical                           OLS2-Dual (single port)
Output wavelength (nm) 1310 ±20
                                        1550 ±20
Output power                  0 dBm*
Laser classification        Class 1 (FDA 21 CFR 1040.1
                                        and 1040.11, and IEC 60825-1)
Output connector            ST
Spectral width (FWHM)   5 nm (max)
Stability                           ± 0.05 dB over 1 hour (after 15 min. warm-up)
                                       ± 0.1 dB over 8 hours (after 15 min. warm-up)
General
Power                             2 x AA batteries, optional NiMH or AC adapter
Battery life                      (2 x AA) Typical 120 hours, Minimum 75 hours
Operating temperature   -10 to 50°C, 90% RH (non-condensing)
Storage temperature      -30 to 60°C, 90% RH (non-condensing)
Size (H x W x D)             5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight                             0.65 lb (.29 kg)

NOYES OFI 200B Optical Fiber Identifier

Noyes Fiber Systems' OFI 200B Optical Fiber Identifier is a low-cost, high-technology approach to non-invasive fiber optic signal detection. Using a low-insertion loss, macro-detection technique, this device accurately discriminates fiber optical signals without disrupting service or overstressing the fiber. During installations, cutovers, maintenance and restoration, the OFI 200B is used to identify optical fibers carrying normal traffic, a 2-kHz tone or if no signal is present (dark).

The OFI 200B uses a sophisticated detection scheme which allows for a gradual, short-length bending of the fiber under test. This technique ensures low stress (<100 kpsi max) and low insertion loss (0.5 dB typical @ 1300 nm) while providing sensitive signal detection.


Included Accessories:
  *  NOYES OLS2 DUAL SM Optical Source
  *  NOYES OFI 200B Optical Fiber Identifier
  *  1 ST-to-SC SM Fiber Patch Cable
  *  1 SC-to-SC Connecter



For full Noyes OLS 1 product specifications, please click here: Noyes OLS 1

1310nm 1550nm Light Source with Fiber Identifier

Noyes OLS2-D OLS-2-D SM Fiber Source Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.