AFL NOYES OPM 4-4D OLS2-1310 OLS2-1550
Condition: Refurbished
Warranty: 90 Day Exchange
OPM 4 Optical Power Meter The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
Features:
- Rugged, handheld, lightweight
- Multimode or single-mode applications
- Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
- Wave ID - automatic wavelength identification and switching
- Passive Optical Networks (PON) testing
- Dual Wavelength testing
- 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
- Large LCD with Backlight
- Power measurements in dBm or µW; insertion loss in dB
- Reference power level storage
- AA alkaline, optional rechargeable NiMH battery pack
- Battery Gauge
- N.I.S.T traceable
Calibrated wavelengths (nm) | 850, 980, 1310, 1490, 1550, 1625 |
Detector type | Filtered InGaAs |
Measurement range (dBm) | +26 to -50 |
Tone detect range (dBm) |
+6 to -30 +6 to -25 for 850nm |
Wavelength ID range (dBm) |
+6 to -30 +6 to -25 for 850nm |
Accuracy (dB) | ± 0.25 |
Resolution (dB) | 0.01 |
Measurement units | dB, dBm, µW |
OLS2 Laser Light Source The OLS2 laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fi ber optic links when used with an optical power meter. When paired with an optical fi ber identifi er, the OLS2 may be used for fi ber identifi cation. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.
Two versions of the OLS2 are available for measurements at 1310 nm, 1550 nm. This light source offers 2 modes of operation: continuous wave (CW) and 2 kHz modulated Tone. [Laser Active], [Battery], and [External Power] indicators identify the enabled laser, battery charge status, and external power presence. The output port is equipped with FC, SC, or ST style connector. The OLS2 laser sources operate on disposable batteries or AC adapter. The OLS2 is fully N.I.S.T. traceable.
Features:
- Rugged, handheld, lightweight
- Certify single-mode links per TIA/EIA standards
- CW or 2 kHz modulated Tone
- Long battery life
- Low battery indicator
- Adjustable output
- Cost-effective, easy to use
- N.I.S.T. Traceable
Optical Specifications | OLS2-1310 | OLS2-1550 |
Output wavelength | 1310 ±20 nm | 1550 ±20 nm |
Output power1 | -5 dBm | -5 dBm |
Laser classification | Class 1 (FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1) | |
Output connector2 | FC, SC, or ST | |
Modes of operation3 | CW and 2 kHz | |
Spectral width (FWHM) | 5 nm (max), 1625 nm: 5 nm (typ) | |
Stability | ± 0.1 dB over 1 hour (after 20 min. warm-up) | |
± 0.15 dB over 8 hours (after 20 min. warm-up) | ||
General Specifications | ||
Power | Typical 40 hours with 9V battery, optional AC adapter | |
Operating temperature | -10 to 50°C | |
Storage temperature | -30 to 60°C | |
Size (H x W x D) | 5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm) | |
Weight | 0.65 lb (.29 kg) |
Includes: - Noyes OPM 6-3 Optical Power Meter
- - 850nm
- - 980nm
- - 1310nm
- - 1490nm
- - 1550nm
- - 1625nm
- Noyes OLS2-1310 Laser Source 1310nm
- Noyes OLS2-1550 Laser Source 1550nm
- Fiber Cables:
- - SC-ST
- - SC-SC
- - SC-FC
- Fiber Connectors:
- - SC-SC
- - ST-ST
- User Manual On CD-ROM
- Hard Carrying Case
For full Noyes OPM 4 OLS 2 product specifications, please click here: Noyes OPM 4 OLS 2
Noyes OPM4-4D OLS2-1310 OLS2-1550 OPM-4-4D OLS-2-1310 OLS-2-1550 SM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.