JDSU Westover FBP-HD3-P Fiber Inspection System
Condition: Refurbished
Warranty: 90 Day Exchange
HD3 Display
Key Features
- High-resolution 1.8-inch TFT LCD display that can detect 1 µm or smaller scratches and dirt particles
- Ruggedized enclosure for use in any environment
- GripSwitchル mode activates the display when held in-hand and deactivates when released, extending battery life
- Built-in rechargeable NiMH battery pack
- Over 3-hour run time on continuous-ON mode and extended run time in GripSwitch mode
- Low-battery warning LED (illuminates when battery life is < 30 minutes)
- AC adapter (100ヨ240 VAC/12 VDC) charges NiMH battery and also acts as alternate power supply
Applications
- View clear detailed fiber end face images on 1.8-in video display
- Use with JDSU probe microscope to inspect both bulkhead (female) and patch cord (male) sides of fiber interconnect
- Promote proper fiber handling workflow and practice
HD3 Handheld Display
The HD3 display combines performance and value in a small, durable device that fits comfortably in the userメs hand. Used with JDSU fiber inspection probe microscopes, the HD3 provides a highly portable, efficient display for viewing and inspecting fiber connector end faces. With its durable design and rugged enclosure, the HD3 ensures excellent performance during field applications. It features a 1.8-inch thin film transistor (TFT) liquid crystal display (LCD) incorporated into a durable, rugged enclosure, and powered with a rechargeable NiMH battery. An innovative GripSwitch conserves battery life with instant-ON functionality when holding the unit in-hand, and it deactivates, or powers OFF when set down. It is equipped with a continuous-ON feature for hands-free operation.
HD3 Display Specifications
Dimensions | 10 x 7.2 x 4.3 cm (3.9 x 2.8 x 1.7 in) |
Weight | 230 g (8.1 oz) with probe |
Video display | 1.8-in (45.7 mm) TFT LCD |
Connector | 4-pin Hirose for FBP probes; hardwired to FBP or FBE probes |
Power source | Built-in rechargeable NiMH (nickel metal hydride), 800mAH battery or AC adapter (100ヨ200VAC/12VDC) |
Power modes | ON (continuous on)GripSwitch (power saving mode)OFF/CHARGE |
Run time | ~3 hours (continuous on)Extended run time with use of GripSwitch (power saving mode) |
For full EXFO HD3 product specifications, please click here: EXFO HD3
JDSU HD3 Display & JDSU Westover 400X FBP Fiberscope
Fiber Inspection System
Includes Carrying Case & Accessories As Listed
HD-3 FBP-HD3
Westover FBP-HD3-P FBPHD3P Fiber Inspection System Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 13526 15476M
- JDSU Westover HD3 Display (BC# 13526)
- 2.5mm Connector For Display
- JDSU Westover FBP Probe (BC# 15476M)
- AC Adapter/Chrager
- User Manual On CD-ROM
- Carrying Case (G)