Jdsu HST-3000 SIM VDSL-IN Module
$195.00
Availability:
In stock
SKU
1L155
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
JDSU HST-3000 VDSL-IN Service Interface Module
Qualifying a very high speed Digital Subscriber Line (VDSL) service that can transport high definition television (HDTV) and triple-play services requires more than a simple Go/No-Go tester. One lightweight, robust, battery-operated JDSU HST-3000 tester equipped with the Infineon Technologies ADSL/VDSL2 module offers more capability than any other handheld tester on the market. This tester gives both technicians and telco engineers the confidence and the necessary power to complete the job, and get it done right. With one tool, they can test and troubleshoot asynchronous DSL (ADSL)/VDSL2 circuits by emulating either the customer modem (ATU-R/VTU-R mode) or the DSL access multiplexer (DSLAM) (ATU-C/VTU-C mode).
Designed for the outside plant, the Infineon service interface module (SIM) also supports legacy ADSL1, ADSL2, ADSL2+, VDSL1, and VDSL2, making it easy and efficient for technicians to switch between testing technologies without having to swap modules. The Infineon SIM also features powerful Hlog and quiet line noise (QLN) to simplify identifying hard to find noise, crosstalk, pair imbalance, bridged taps, and other copper plant anomalies. The Infineon SIM is also available with dual tip/ring/ground (A/B/E) interfaces for basic and advanced copper troubleshooting to further isolate copper pair problems.
Lightweight, rugged, and battery-operated, the HST-3000 with the Infineon SIM cost-effectively scales to provide an all-in-one solution for field installation, maintenance, and troubleshooting across a wide range of triple-play service test applications.
Specifications:
For full JDSU HST-300 SIM VDSL-IN Module product specifications, please click here: JDSU HST-3000 CDSL-IN
Qualifying a very high speed Digital Subscriber Line (VDSL) service that can transport high definition television (HDTV) and triple-play services requires more than a simple Go/No-Go tester. One lightweight, robust, battery-operated JDSU HST-3000 tester equipped with the Infineon Technologies ADSL/VDSL2 module offers more capability than any other handheld tester on the market. This tester gives both technicians and telco engineers the confidence and the necessary power to complete the job, and get it done right. With one tool, they can test and troubleshoot asynchronous DSL (ADSL)/VDSL2 circuits by emulating either the customer modem (ATU-R/VTU-R mode) or the DSL access multiplexer (DSLAM) (ATU-C/VTU-C mode).
Designed for the outside plant, the Infineon service interface module (SIM) also supports legacy ADSL1, ADSL2, ADSL2+, VDSL1, and VDSL2, making it easy and efficient for technicians to switch between testing technologies without having to swap modules. The Infineon SIM also features powerful Hlog and quiet line noise (QLN) to simplify identifying hard to find noise, crosstalk, pair imbalance, bridged taps, and other copper plant anomalies. The Infineon SIM is also available with dual tip/ring/ground (A/B/E) interfaces for basic and advanced copper troubleshooting to further isolate copper pair problems.
Lightweight, rugged, and battery-operated, the HST-3000 with the Infineon SIM cost-effectively scales to provide an all-in-one solution for field installation, maintenance, and troubleshooting across a wide range of triple-play service test applications.
Specifications:
ADSL/VDSL Infineon Module | |
Standard Compliance | VDSL2 ITU-T G.993.2 Bandplans 8, 12, 17, 30 MHz; Profiles 8a/b/c/d, 12a/b, 17a, 30a(ATU-R/VTU-R); Plan 997, 998 ADSL1/2/2+ Annex A option (over POTS): ITU-T G.992.5 (ADSL2+), ITU-T G.992.3/4 (ADSL2), ITU-T G.992.1/2 (G.DMT) and ANSI T1.413 Issue 2 Annex B option (over ISDN): ITU-T G.992.5 (ADSL2+), ITU-T G.992.3/4 (ADSL2), ITU-T G.992.1/2 (G.DMT) Annex L (RE-ADSL) and Annex M |
Modes | ATU-R/VTU-R and ATU-C/VTU-C |
ADSL/VDSL2 | |
Graphs | BPT Combination BPT/SNR Tone VDSL Band Statistics Hlog QLN |
Miscellaneous results | Synchronization (Showtime) Failed Synchronization Number of Syncs Training Time Standard Used Estimated Loop Length Modem Firmware Version |
Measurements Upstream/Downstream | Actual Rate Max Rate Capacity Noise Margin Attenuation - Signal, Line Tx Power Connect Method (ADSL only) Interleave Delay Actual INP PSD |
Errors/Performance Local/Remote/Remote (Total) | Loss of Signal Forward Error Correction (FEC) Cyclic Redundancy Check (CRC) Errored Seconds Severely Errored Seconds Unavailable Seconds |
Band Statististics (per VDSL US/DS Band) | Loop Attenuation Signal Attenuation SNR Margin |
Network | |
Network Modes | Terminate,Through (ATU-R/VTU-R) |
Network Types | VDSL IPoE, PPPoE, Multiple VLANS, Data off ADSL/ADSL2+ IPoE, PPPoE, MVC Video, IPoA, PPPoA, Multiple VLANS, Data off Network off VPI/VCI |
IP Mode | DHCP, static |
MAC Setting | Factory default, User-defined |
Vendor ID | Yes/No |
User Class | Yes/No |
VLAN | Tag On/Off ID Selection 0ヨ4095 Priority selection 0ヨ7 |
For full JDSU HST-300 SIM VDSL-IN Module product specifications, please click here: JDSU HST-3000 CDSL-IN
JDSU HST-3000 SIM VDSL-IN Service Interface Module
Designed for the outside plant, the Infineon service interface module (SIM) also supports legacy ADSL1, ADSL2, ADSL2+, VDSL1, and VDSL2, making it easy and efficient for technicians to switch between testing technologies without having to swap modules
Works With HST-3000 And HST-3000C Mainframes
(HST-3000 & HST-3000C Mainframes Not Included In Sale!)
HST 3000 HST 3000C
JDSU HST-3000 VDSL-IN Service Interface Module VDSLIN Service Interface Module Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 21284m
- JDSU HST-3000 SIM VDSL-IN Module (BC# 21284m)
Request a Quote for