Corning Siecor M90 6000 Series LID Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Corning Siecor M90 Series 6000 Fusion Splicer
A LANscape® Solutions Product
Applications
- For the lowest splice loss commercially available
- Enterprise networks, data centers, telco and CATV systems
- System maintenance and restoration
- Custom attenuators: programmable splice loss (up to 10 dB)
- Best for splicing old, dissimilar or specialty fibers
Description
The Corning Cable Systems Model M90 Fusion Splicer remains the ideal machine for long-haul telephone and CATV single-mode fiber splicing where accuracy is imperative. The LID-SYSTEM® Unit (Local Injection and Detection System) monitors light injected into the core of the fibers and provides the lowest splice loss possible with the most accurate loss readings in the industry. The recent addition of patented maintenance-free electrodes provides even more value by eliminating the time spent cleaning and replacing electrodes.
The accuracy of the LID-SYSTEM Unit and its power through splice loss measurement method eliminate the time consuming task of evaluating splices with an OTDR. The 1300 nm LID-SYSTEM Unit first optimizes core alignment in each of the X, Y, and Z axes. When the fusion process begins, the M90?s unique Auto Fusion Time Control monitors the power level through the splice and completes the fusing process when splice loss is a minimum ? ensuring the best splice possible. Finally, the LID-SYSTEM Unit measures splice loss by comparing power levels before and after the fusion process. Over 1,000 splice loss results may be stored in memory and then printed directly from the M90 or downloaded to a PC for network management records. A newly added PCMCIA slot allows for extended memory and future upgrades.
The unit also precisely evaluates the cleaved fiber ends ? a basic prerequisite for good splices. By clamping on fiber coating, high-strength splices can be made. Messages and splice loss results are shown on the M90?s high-contrast, large 5.5-in color LCD. Fixed lenses magnify the X and Y views of the fibers 100 times and project the images simultaneously on the screen or to an external monitor.
The M90?s new Series 6000 software stores 50 programs with user-defined splicing parameters for different types of fibers. It also has 13 fixed programs for standard and specialty single-mode fibers and multimode fiber, and an automatic fiber type detection feature that will inform you if you are attempting to use the wrong program for your fiber type. Splice losses up to 10.0 dB can be programmed for an in-line attenuator with the characteristic non-reflectance of a fusion splice. With the new software upgrade tool, a customer?s M90 can be upgraded with the latest software via a printer cable and PC connected to an e-mail system.
In the fully automatic mode, the lighter and smaller M90 Series 6000 provides a typical average splice loss better than 0.02 dB for both singlemode fibers and multimode fibers.
Features / Benefits
- Accurate loss estimation
- Proven excellence ? 12 years of field reliability
- LID-SYSTEM Unit and fast Profile Alignment System (PAS) in one
- AutoFusion Time Control ensures lowest splice loss possible under a variety of splicing conditions and environments
- Automatic cleaning, X, Y and Z fiber positioning and fusing with one button operation
- Maintenance-free Precise and Durable (P&D) electrodes
Specifications
- Principle Operation: Direct Core Alignment LID-SYSTEM® Unit, 3-axis alignment
- Fiber Coatings: 250 µm to 900 µm
- Fiber Types: Single-mode, specialty SM, multimode (50 µm and 62.5 µm)
- Typical Splice Loss: Lab < 0.02 dB for identical single-mode fiber / Field < 0.05 dB for single-mode
- Estimator Accuracy: ± 0.05 dB for 100% of the single-mode splices
- Monitor: Color LCD, 100x 5.5-in diagonal; external jack for PAL compatible monitor
- Splice Protection: Heat-Shrink or Crimp & Go® Splice Protection Crimping Device
- AC Power: 95-260 V AC, automatic voltage range selection; 50 to 60 Hz; 100 W maximum DC 12 V DC rechargeable batteries provide splices fully charged (two batteries equals 80 splices with heater), recharge time, approximately 8 hours; external 12 V DC supply
- Operating Temperature: -5 to +45°C
- Dimensions: (H x W x D) 18 x 26 x 24 cm (7.1 x 10.2 x 9.6 in)
- Weight: 8.5 kg (18.7 lb)
For full Corning M90 6000 product specifications, please click here: Corning M90 6000
Siecor M90 6000 Series Singlemode Multimode LID Core Alignment Fusion Splicer
The LID-SYSTEM® Unit (Local Injection and Detection System) monitors light injected into the core of the fibers and provides the lowest splice loss possible with the most accurate loss readings in the industry.
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
Includes Hard Carrying Case & Accessories As Listed
M-90 M 90
Corning M90 6000 M-90 6000 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 25336-L/T*
- Siecor M90 6000 Series Core Ailgnment Fusion Splicer (BC# 25336-L/T*)
- Clauss CFS-2 Fiber Optic Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- 125/250 - 125/900 Fiber Holder Set
- 250 Fiber Holder Set
- Work Lamp
- M90 Video
- Cooling Tray
- Assorted Tool Kit
- Power Cord
- RS232 PC Interface Cable
- Hard Carrying Case