EXFO FOT-90A Power Meter & FLS-230A VFL
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
- Ultra-High Power? models
- Programmable data acquisition
- Extended memory
- Automatic wavelength recognition
- Data-management software
The FOT-90A Power Meter, one of the most complete fiber-optic power meters available, just got better. EXFO is leading the industry again by being the first to offer +35 dBm capability in a handheld instrument. This sturdy unit has received worldwide acceptance in the fiber-optic industry. In a world where technology seems to change every second, the FOT-90A continues to demonstrate its superiority by providing reliable performance and accurate measurements.
The FOT-90A is a high-performance unit for power/loss testing of fiber-optic links and components. It features an automated wavelength-recognition system with intelligent testing options. Paired with a compatible light source (FLS-210A or FLS-210B), the FOT-90A automatically recognizes operating calibration wavelength parameters, then averages, validates and stores loss data with easy onebutton operation.
Key Features
- Up to +35 dBm capability with Ultra-High-Power? model
- Optional RS-232 interface
- Large, easy-to-read, backlight display
- Data-management software available
Networks today need high power. The networks of tomorrow will require even more. This growing demand for power is driven by the stress being placed on fiber-optic networks.
Leading developers are using high-power systems to meet escalating requirements. Increased demand for DWDM and longer cable spans have created a need to boost power with EDFAs; this trend will continue.
Couple growing network demands with the still higher power levels being measured in research labs: It quickly becomes evident that the ability to measure this greater power will be essential.
EXFO is introducing another industry first in the FOT-90A Power Meter. Directly measure the absolute power of high-output fibers in the field with its Ultra-High Power? capabilities. Accurately measure signals with power levels as high as 35 dBm without neglecting those at the lower end of the dBm range. The FOT-90A Ultra-High Power? option accurately measures signals as low as ?43 dBm, making it the complete solution for advanced networks.
EXFO FLS-230A Features
- Bright and powerful red laser at 650 nm
- Optimized visibility for short and long range (up to 5 km)
- ?0.5 dBm power output
- Continuous and pulsed operation
- Three-way powering with automatic shut-off function
- Modulation mode: 1 Hz and 50 % duty cycle
- Universal 2.5 mm connector
The FLS-230A helps you visually pinpoint the location of breaks, faulty splices, or connectors within CO splice trays and patch panels. The bright red glow of the FLS-230A indicates where attenuation is reducing your system's performance. Its highly visible laser signal warns you in the event of abnormal losses.
On-the-spot applications
- Locates breaks, pinches, or tight bends, even through light-colored fiber jackets
- Troubleshoots faults within OTDR dead zones
- Accelerates end-to-end fiber identification
Since it uses a 650 nm laser source, the FLS-230A offers optimal performance, both at short and long ranges. It appears three times brighter than conventional 670 nm fault locators at the launch point, and provides long-distance range for end-to-end identification. In bright ambient light, the flashing mode increases the visibility of the red signal.
Durability and portability
You can take the FLS-230A anywhere. It is designed to withstand demanding field conditions in a number of environments. A shock-absorbent protective holster provides a convenient tilt stand and a shoulder strap. The tough polycarbonate casing protects the fault locator in case of accidental drops, and the sealed keypad resists splashes and harsh weather.
Three-way powering goes a long way
The FLS-230A relies on three complementary power sources for extended operation. When the rechargeable NiCd battery runs low, the unit automatically switches to the 9 V alkaline battery backup. An AC adapter/charger is also supplied for continuous operation.
SPECIFICATIONS:
| Operation mode | CW |
| Power output high (dBm) (typical) |
?0.4 |
| Emission wavelength (red) (nm) | 650 ± 10 |
| Range (km) (typical) | Up to 5 |
| GENERAL SPECIFICATIONS | |
| Size (H x W x D) | 22.7 cm x 12 cm x 6 cm |
| Weight | unit 0.75 kg (1 1/2 lb) shipping 2.5 kg (5 1/2 lb) |
| Temperature | operating ?10 °C to 40 °C (14 °F to 104 °F) storage ?30 °C to 60 °C (?22 °F to 140 °F) |
| Power | Built-in NiCd batteries 20 hours (CW) or 27 hours (1 Hz), 14 hours recharging; 9 V alkaline batteries, 7 extra hours; AC adapter/charger for continuous use |
For full EXFO FOT-92A product specifications, please click here: EXFO FOT-92A
EXFO FOT-92A Singlemode 1310nm/1550nm Fiber Power Meter
&
EXFO FLS-230A Visual Fault Locator (VFL)
The FLS-230A has a bright and powerful red laser at 650 nm with optimized visibility for short and long range (up to 5 km)
Includes Hard Case And Accessories As Listed!
FOT 90 90A 92A FLS 230A
EXFO FOT-92A FOT92A SM MM Fiber Power Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 12407 12406
- EXFO FOT-92A Singlemode Power Meter (BC# 12407-L/T*)
- 1310nm
- 1550nm
- EXFO FLS-230A Visual Fault Locator (BC# 12406-L/T*)
- Interchangeable Universal Connector For Power Meter
- (2) SM ST-ST Fiber Cables
- (2) AC Adapter/Chargers
- EXFO FLS-230A Instruction Manual
- User Manual On CD-ROM
- (2) Straps For Units
- Hard Carrying Case