On Sale! EXFO FTB-400 FTB-5230 OTDR Model FTB400 FTB5230 EXFO 400 5230

Description

The FTB-400 Universal Test System (UTS) provides a simple, yet efficient,way to perform multiple advanced test operations in outside plant installation,maintenance, and troubleshooting.

If you're looking for high efficiency, the FTB-400 Universal Test System is the answer. Benefit from advanced test operations in outside plant installation, maintenance and troubleshooting. Evolve with the latest technologies. From power readings and OTDR testing to optical switching, CD and PMD analysis, DWDM testing, protocol, datacom and data post-processingﾗthe FTB-400 Universal Test System does it all. More importantly, the FTB line of swappable test modules continues to expand with new test applications and accelerated test routines. The powerful FTB-400 can perform simultaneous acquisitions and data post-processing.

The ultimate platform for network experts

Simultaneous acquisitions and fast data post-processing
Scalable range of test applications and field-interchangeable modules
Pentium-powered Windows operating system
Easy-to-read, high-resolution 30.7 cm transflective (TFT) screen

Combining physical, optical, transport and datacom testing in a single box

Physical and optical testing: complete fiber and signal characterization using OTDR, OLTS, PMD, CD and OSA test modules
Transport and datacom testing: QoS assurance validation using SONET/SDH and Ethernet test modules

Powerful

Power management is a snap, thanks to the ToolBox software. EXFOﾒs FTB-400 is based on the Windows® 2000 operating system, run by a Pentium-series processor with up 512 MB of SDRAM
- Fast, intuitive Sleep mode for power conservation
- Far-ranging operating time
- Automated power management

Rapid

Get moving faster, get results faster. New-generation processing power means acquisitions and data analysis are quicker than ever. And enjoy the advantage of EXFO's exclusive online data post-processing.
- Quick, easy data transfer
- Extremely fast acquisitions
- Efficient data post-processing
- Two USB ports
- Infrared (IrDA) port
- PCMCIA type III
- Writable CD-ROM

SPECIFICATIONS

Display:
- Touchscreen, color, 800 x 600 TFT 307 mm (12 1/16 in)

Interfaces
- Serial RS-232
- Parallel port
- External monitor
- Two USB 1.1 ports
- Infrared (IrDA) port
- Audio microphone In 3.5 mm
- Audio speaker Out 3.5 mm
- Two PCMCIA type II or one PCAMCIA type III

Storage
- Internal 40 GB hard drive minimum (over 750 000 OTDR test files)
- Internal 3.5 in 1.44 MB floppy drive
- External USB read/write CD-ROM (optional)
- Flash memory cards (256, 512, 1024 MB) (optional)
- NTFS file system

Batteries
- Rechargeable NiMH battery pack (two batteries for two-slot receptacle, two for four-slot receptacle, four for seven-slot receptacle, two for eight-slot receptacle) > 8 h of continuous operation as per Bellcore TR-NWT-001138

Power supply
- 100ﾖ240 VAC, 50/60 Hz and 12ﾖ24 VDC for the two-slot (GP-402) and the seven-slot (GP-407) module receptacles; 100ﾖ240 VAC, 50/60 Hz and 24 VDC for the four-slot (GP-404) module receptacle; and 100-240 VAC, 50/60 Hz for the eight-slot
  (GP-408) module receptacle GENERAL SPECIFICATIONS

Temperature
- operating: 0 ºC to 50 ºC (32 ºF to 122 ºF)
- storage: ﾖ40 ºC to 60 ºC (ﾖ40 ºF to 140ºF)

Relative humidity
- 0 % to 95 % (non-condensing)

Size (H x W x D)
- Mainframe + eight-slot module receptacle: 318 mm x 343 mm x 246 mm
  (12 1/2 in x 13 1/2 in x 9 11/16 in)

Weight
- Mainframe + eight-slot module receptacle, including two NiMH batteries: 11.1 kg (24.5 lb)

Vibration:
- < 1.5 g. at 10 Hz to 500 Hz (on three main axes)

Mechanical shock:
- e < 760 mm on six sides and eight main edges (according to GR-196-CORE)

Isolation:
- Spillproof and splashproof

CE compliance:
- Class A certification

FTB-5230

Optimized for Metro/Access Network-Based Systems

Designed for CWDM test applications within metro/access networks
Ideal for testing networks that comply with the ITU-Tﾒs G.694.2 and G.695 standards
Key feature: wavelength and power drift measurements
Best-in-class optical specifications
Wide wavelength range of 1250 nm to 1650 nm

The FTB-5230 CWDM Optical Spectrum Analyzer (OSA) is designed for testing systems based on coarse wavelength-division multiplexing (CWDM) transmission technology, which are typically used in metro and access networks. Perfect for testing all networks that comply with the ITU-Tﾒs G.694.2 and G.695 standards, this cost-effective modular OSA is housed in the FTB-400 Universal Test System, EXFOﾒs tough, portable test platform. Whatﾒs more, the FTB-5230 covers the entire CWDM wavelength range, from 1250 nm to 1650 nm.

Defining CWDM Systems
CWDM systems enable cost-effective applications through a mix of uncooled singlemode lasers, more flexible laser-wavelength-selection tolerances and wide pass-band filters. They can be used in metropolitan transport networks, delivering multiple services and protocols to a large amount of customers. CWDM systems can carry up to 18 channelsﾗwith a 20 nm channel spacingﾗover distances that are generally shorter than what is standard for DWDM transmission. However, CWDM deployment costs are significantly lower than DWDM, which stresses the importance of choosing optimized test equipment.

Key Features: Optimized for Cost-Effectiveness
EXFOﾒs FTB-5230 CWDM OSA was developed with a no-frills approach. It only includes essential OSA functionalities, delivering first-class cost effectiveness. Its key features include:

Drift mode
Wide wavelength range of 1250 nm to 1650 nm
Excellent optical specifications
First-class ruggedness, fitting the most severe test conditions

Drift Mode Analysis

Since CWDM systems use uncooled lasers, whose typical wavelength drift is 0.1 nm per degree Celsius, it is critical to track the evolution and drift of the lasersﾒ central wavelength. And since fiber attenuation can significantly vary within a single channel, wavelength drift also creates power drift. This is why it becomes extremely important to monitorﾗsimultaneously for all CWDM channelsﾗthe evolution of peak power and wavelength over time. The FTB-5230 CWDM Optical Spectrum Analyzerﾒs Drift mode functionalities makes this an easy task.

Ruggedness and Optical Performance
The FTB-5230 Optical Spectrum Analyzer is truly optimized for CWDM applications, and ready for the field-testing challenges they bring. Like all of EXFOﾒs OSAs, it comes with high-end optical specifications, as well as the added and unique advantage of being rugged, portable and battery-operated.

The ToolBox Advantage
EXFOﾒs exclusive ToolBox software suite runs the test module applications on the FTB-400 Universal Test System. Easy-to-read graphics and clear instructions simplify testing and increase productivity in the field. All applications supported by the FTB-400 have a common graphical user interface.

One-Button Testing
Simplify testing and stay on schedule with one-button testing and the FTB-5230ﾒs integrated software. If your deadline is tomorrow, the last thing you need is software that will slow you down. Turn on the unit and the last settings are ready for CWDM system characterization. Press Start, and within seconds, you receive your data.

SPECIFICATIONS

Wavelength range (nm)	1250 to 1650
Resolution bandwidth FWHM (nm)	= 0.1
Wavelength uncertainty (nm)	ﾁ± 0.1
Wavelength uncertainty (nm)	ﾁ± 0.02
Dynamic range (dB)	10 to .64
Power uncertainty (dB)	ﾁ± 0.4
ORR at 100 GHz (dBc)	minimum 40
Scanning time (s)	< 5 (35 nm span, full resolution, multi-peak analysis)
PDL (dB)	ﾁ± 0.1
ORL (dB)	> 35

For full EXFO FTB-400 FTB-5230 product specifications, please click here: EXFO FTB-400 FTB-5230

Additional Information

EXFO FTB-400 MINI-OTDR Main Frame With EXFO FTB-5230 CWDM Optical Spectrum Analyzer Module

Wide Wavelength Range Of 1250nm To 1650nm

Includes Hard Carrying Case & Accessories As Listed

FTB400 FTB 400 FTB5230 FTB 5230

EXFO FTB-400 MINI-OTDR Main Frame With EXFO FTB-5230 CWDM Optical Spectrum Analyzer Module On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 06152-L/T*

Included