EXFO FTB-400 SM OTDR w/ FTB-1402 MultiTest Module
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
The FTB-400 Universal Test System (UTS) provides a simple, yet efficient,way to perform multiple advanced test operations in outside plant installation,maintenance, and troubleshooting.
If you're looking for high efficiency, the FTB-400 Universal Test System is the answer. Benefit from advanced test operations in outside plant installation, maintenance and troubleshooting. Evolve with the latest technologies. From power readings and OTDR testing to optical switching, CD and PMD analysis, DWDM testing, protocol, datacom and data post-processingﾗthe FTB-400 Universal Test System does it all. More importantly, the FTB line of swappable test modules continues to expand with new test applications and accelerated test routines. The powerful FTB-400 can perform simultaneous acquisitions and data post-processing.
The ultimate platform for network experts
- Simultaneous acquisitions and fast data post-processing
- Scalable range of test applications and field-interchangeable modules
- Pentium-powered Windows operating system
- Easy-to-read, high-resolution 30.7 cm transflective (TFT) screen
Combining physical, optical, transport and datacom testing in a single box
- Physical and optical testing: complete fiber and signal characterization using OTDR, OLTS, PMD, CD and OSA test modules
Transport and datacom testing: QoS assurance validation using SONET/SDH and Ethernet test modules
Powerful
- Power management is a snap, thanks to the ToolBox software. EXFOﾒs FTB-400 is based on the Windows® 2000 operating system, run by a Pentium-series processor with up 512 MB of SDRAM
- Fast, intuitive Sleep mode for power conservation
- Far-ranging operating time
- Automated power management
Rapid
- Get moving faster, get results faster. New-generation processing power means acquisitions and data analysis are quicker than ever. And enjoy the advantage of EXFO's exclusive online data post-processing.
- Quick, easy data transfer
- Extremely fast acquisitions
- Efficient data post-processing
- Two USB ports
- Infrared (IrDA) port
- PCMCIA type III
- Writable CD-ROM
SPECIFICATIONS
- Display:
- Touchscreen, color, 800 x 600 TFT 307 mm (12 1/16 in)
- Interfaces
- Serial RS-232
- Parallel port
- External monitor
- Two USB 1.1 ports
- Infrared (IrDA) port
- Audio microphone In 3.5 mm
- Audio speaker Out 3.5 mm
- Two PCMCIA type II or one PCAMCIA type III
- Storage
- Internal 40 GB hard drive minimum (over 750 000 OTDR test files)
- Internal 3.5 in 1.44 MB floppy drive
- External USB read/write CD-ROM (optional)
- Flash memory cards (256, 512, 1024 MB) (optional)
- NTFS file system
- Batteries
- Rechargeable NiMH battery pack (two batteries for two-slot receptacle, two for four-slot receptacle, four for seven-slot receptacle, two for eight-slot receptacle) > 8 h of continuous operation as per Bellcore TR-NWT-001138
- Power supply
- 100ﾖ240 VAC, 50/60 Hz and 12ﾖ24 VDC for the two-slot (GP-402) and the seven-slot (GP-407) module receptacles; 100ﾖ240 VAC, 50/60 Hz and 24 VDC for the four-slot (GP-404) module receptacle; and 100-240 VAC, 50/60 Hz for the eight-slot
(GP-408) module receptacle GENERAL SPECIFICATIONS
- 100ﾖ240 VAC, 50/60 Hz and 12ﾖ24 VDC for the two-slot (GP-402) and the seven-slot (GP-407) module receptacles; 100ﾖ240 VAC, 50/60 Hz and 24 VDC for the four-slot (GP-404) module receptacle; and 100-240 VAC, 50/60 Hz for the eight-slot
- Temperature
- operating: 0 ºC to 50 ºC (32 ºF to 122 ºF)
- storage: ﾖ40 ºC to 60 ºC (ﾖ40 ºF to 140ºF)
- Relative humidity
- 0 % to 95 % (non-condensing)
- Size (H x W x D)
- Mainframe + eight-slot module receptacle: 318 mm x 343 mm x 246 mm
(12 1/2 in x 13 1/2 in x 9 11/16 in)
- Mainframe + eight-slot module receptacle: 318 mm x 343 mm x 246 mm
- Weight
- Mainframe + eight-slot module receptacle, including two NiMH batteries: 11.1 kg (24.5 lb)
- Vibration:
- < 1.5 g. at 10 Hz to 500 Hz (on three main axes)
- Mechanical shock:
- e < 760 mm on six sides and eight main edges (according to GR-196-CORE)
- Isolation:
- Spillproof and splashproof
- CE compliance:
- Class A certification
EXFO FTB-7323B OTDR Module
In todayﾒs competitive market, high-performance, easy-to-use OTDRs are more essential than ever for installing, maintaining and troubleshooting networks. With the new FTB-7000B and FTB-70000C series OTDR modules from EXFO, you get the right tools to precisely detect and analyze fiber splices, connectors, breaks and other events along a fiber link. The FTB-7000B series delivers a wide choice of OTDRs to conveniently test the range of optical networks out there.
Features:
- Reduced trace noise: catch low-loss events.
- Short dead zones: detect closely spaced events.
- Four-point loss measurements: measure event loss and reflectance accurately
- Optical return loss (ORL) calculation: pinpoint the backreflection level of singlemode networks, components and connectors
- Quick startup: reach 90% of maximum dynamic range in under 30 seconds.
- Fast acquisition, fast analysis: a trace starting at 7 seconds
- High sampling counts: locate events with unparalleled precision.
- Down to 8 cm sampling resolution: pinpoint fault locations with extreme accuracy
Specifications:
| Wavelength (nm) | 1310 ± 20/1550 ± 20 |
| Dynamic Range (dB) at 10 µs | 37.5/35.5 |
| Dynamic Range (dB) at 20 µs | 38.5/37.5 |
| Event dead zone (m) | 3/3 |
| Attenuation dead zone (m) | 10/15 |
| Distance range (km) | 1.25, 2.5, 5, 10, 20, 40, 80, 160, 260 |
| Pulse width (ns) | 10, 30, 100, 275, 1000, 2500, 10 000, 20 000 |
| Linearity (dB/dB) | ± 0.05 |
| Loss threshold (dB) | 0.01 |
| Loss resolution (dB) | 0.001 |
| Sampling resolution (m) | 0.08 to 5 |
| Sampling points | Up to 52 000 |
| Distance uncertainty | ± (1 m + 0.0025 % x distance) |
| Measurement time | User-defined (60 min maximum) |
| Real-time refresh | < 1 s |
| Stable source output power (dBm) | -5 |
EXFO FTB-1402 MultiTest Module
Key Features
- 1625 nm testing provides worst-case attenuation for the L band
- Fiber identifier detects 2 kHz signals
- Notepad feature documents power meter results in the field or in the office
- Power meter or optical loss test set uses manual or automated operation
- Visual fault locator features 650 nm visible bright red source
- Ultra-High-Power power meter models
Visual Fault Locator (VFL)
- Emitter type: laser
- Wavelength (nm): 650 ± 10
- Output power (CW) (dBm): -1
EXFO FTB-400 MINI-OTDR Fiber Main Frame With
FTB-7323B SingleMode 1310 / 1550nm OTDR Module &
FTB-1402 MultiTest Module w/ Power Meter & VFL
Dynamic Range:
1310 / 1550 nm : 38.5 / 37.5 dB
Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1550nm
- 1625nm
Includes Carrying Case & Accessories As Listed
FTB400 FTB 400 7323B 1402 FTB1402
EXFO FTB-400 FTB-7323B FTB-1402 FTB400 FTB7323B FTB1402 OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 19967 19968 19969
- EXFO FTB-400 OTDR Main Frame (BC# 19967)
- EXFO FTB-7323B Singlemode OTDR Module (BC# 19969)
- SM OTDR Source:
- 1310nm
- 1550nm
- ST Connector For Source
- SM OTDR Source:
- EXFO FTB-1402 MultiTest Module (BC# 19968)
- Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1550nm
- 1625nm
- Interchangeable ST Connector For Power Meter
- VFL
- Power Meter:
- Cletop Reel Type A Fiber Cleaver
- Belkin USB 2.0 4-Port Hub
- SanDisk Compact Flash Adapter
- (25) Fluke 1.25mm Fiber Optic Swabs
- 128MB Flash Card
- (2) SM ST-ST Fiber Cables
- (4) Fiber Optic Wipes
- Stylus
- Protective Screen Cover
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- Hard Copy User Manual
- Carrying Case w/ Strap