EXFO FTB-400 FTB-7323B SM Fiber OTDR w/ FTB-8510

The FTB-400 Universal Test System (UTS) provides a simple, yet efficient,way to perform multiple advanced test operations in outside plant installation,maintenance, and troubleshooting.

If you're looking for high efficiency, the FTB-400 Universal Test System is the answer. Benefit from advanced test operations in outside plant installation, maintenance and troubleshooting. Evolve with the latest technologies. From power readings and OTDR testing to optical switching, CD and PMD analysis, DWDM testing, protocol, datacom and data post-processingﾗthe FTB-400 Universal Test System does it all. More importantly, the FTB line of swappable test modules continues to expand with new test applications and accelerated test routines. The powerful FTB-400 can perform simultaneous acquisitions and data post-processing.

The ultimate platform for network experts

• Simultaneous acquisitions and fast data post-processing
• Scalable range of test applications and field-interchangeable modules
• Pentium-powered Windows operating system
• Easy-to-read, high-resolution 30.7 cm transflective (TFT) screen

Combining physical, optical, transport and datacom testing in a single box

• Physical and optical testing: complete fiber and signal characterization using OTDR, OLTS, PMD, CD and OSA test modules
  Transport and datacom testing: QoS assurance validation using SONET/SDH and Ethernet test modules

Powerful

• Power management is a snap, thanks to the ToolBox software. EXFOﾒs FTB-400 is based on the Windows® 2000 operating system, run by a Pentium-series processor with up 512 MB of SDRAM
  • Fast, intuitive Sleep mode for power conservation
  • Far-ranging operating time
  • Automated power management

Rapid

• Get moving faster, get results faster. New-generation processing power means acquisitions and data analysis are quicker than ever. And enjoy the advantage of EXFO's exclusive online data post-processing.
  • Quick, easy data transfer
  • Extremely fast acquisitions
  • Efficient data post-processing
  • Two USB ports
  • Infrared (IrDA) port
  • PCMCIA type III
  • Writable CD-ROM

SPECIFICATIONS

• Display:
  • Touchscreen, color, 800 x 600 TFT 307 mm (12 1/16 in)

• Interfaces
  • Serial RS-232
  • Parallel port
  • External monitor
  • Two USB 1.1 ports
  • Infrared (IrDA) port
  • Audio microphone In 3.5 mm
  • Audio speaker Out 3.5 mm
  • Two PCMCIA type II or one PCAMCIA type III

• Storage
  • Internal 40 GB hard drive minimum (over 750 000 OTDR test files)
  • Internal 3.5 in 1.44 MB floppy drive
  • External USB read/write CD-ROM (optional)
  • Flash memory cards (256, 512, 1024 MB) (optional)
  • NTFS file system

• Batteries
  • Rechargeable NiMH battery pack (two batteries for two-slot receptacle, two for four-slot receptacle, four for seven-slot receptacle, two for eight-slot receptacle) > 8 h of continuous operation as per Bellcore TR-NWT-001138

• Power supply
  • 100ﾖ240 VAC, 50/60 Hz and 12ﾖ24 VDC for the two-slot (GP-402) and the seven-slot (GP-407) module receptacles; 100ﾖ240 VAC, 50/60 Hz and 24 VDC for the four-slot (GP-404) module receptacle; and 100-240 VAC, 50/60 Hz for the eight-slot
    (GP-408) module receptacle GENERAL SPECIFICATIONS

• Temperature
  • operating: 0 ºC to 50 ºC (32 ºF to 122 ºF)
  • storage: ﾖ40 ºC to 60 ºC (ﾖ40 ºF to 140ºF)

• Relative humidity
  • 0 % to 95 % (non-condensing)

• Size (H x W x D)
  • Mainframe + eight-slot module receptacle: 318 mm x 343 mm x 246 mm
    (12 1/2 in x 13 1/2 in x 9 11/16 in)

• Weight
  • Mainframe + eight-slot module receptacle, including two NiMH batteries: 11.1 kg (24.5 lb)

• Vibration:
  • < 1.5 g. at 10 Hz to 500 Hz (on three main axes)

• Mechanical shock:
  • e < 760 mm on six sides and eight main edges (according to GR-196-CORE)

• Isolation:
  • Spillproof and splashproof

• CE compliance:
  • Class A certification

EXFO FTB-7323B Specifications:

Wavelengths	1310/1550nm
Dynamic Range	37.5/35.5dB
Event Dead Zone	3/3
Attenuation Dead Zone	10/15

EXFO FTB-8510 Packet Blazer Module
The FTB-8510 Packet Blazerﾙ brings performance assurance to Ethernet-based services. Its wide range of test functionalities provides all the necessary measurement tools for verifying service-level agreements (SLAs) between service providers and their customers.

This FTB-400-housed module tests transparent connectivity in its native format: 10/100/1000Base-T, 1000Base-SX, 1000Base-LX and 1000Base-ZX for LAN-to-LAN services delivered via ATM, frame relay, Next-Generation SONET/SDH, SONET/SDH hybrid multiplexers, switched Ethernet, VLANs, dark fiber, WDM or other means.

A Highly Efficient and Reliable Test Solution
With the FTB-8510 Packet Blazer, you can test both telecom and packet services, as well as conduct end-to-end performance testing. The FTB-8510 ensures long-term integrity and error-free data delivery across Ethernet WAN links.

First-Class Comprehensiveness
The FTB-8510 performs transparent LAN service (TLS) testing with wire-speed, full-duplex 10, 100 and 1000 Mb/s traffic-generation capabilities. It delivers simultaneous traffic generation and analysis at 100% wire speed for 10/100/1000Base-T, 1000Base-SX, 1000Base-LX and 1000Base-ZX full-duplex networks at all frame sizes. The FTB-8510 also features EtherBERT for bit-error-rate testing of 10/100/1000 Mb/s Ethernet circuits.

Frame Analysis
This FTB-8510 Packet Blazer feature enables traffic generation and analysis, allowing you to troubleshoot an Ethernet circuit and analyze customer traffic for errors. Thanks to its packet jitter measurement capabilities (as per RFC 3393), service providers can benchmark transport networks for delay-sensitive traffic such as voice over IP (VoIP).

Performance Analysis (RFC 2544)
RFC 2544 measurements (throughput, back-to-back, frame loss and latency) provide a basis for service providers and their customers to define service-level agreements (SLAs). They enable service providers to validate the quality of service (QoS) delivered, and can provide them with a tool to create value-added services that can be measured and demonstrated to customers. By offering different classes of services, a service provider can create new revenue sources based on better, measurable performance.

EtherBERT Analysis
The EtherBERT functionality allows for testing transparent Gigabit Ethernet circuits running over an xWDM network as if they were SONET/SDH circuits on the same xWDM network.

User-Friendly Interface
The FTB-8510 Packet Blazerﾒs easy-to-use smart user interface (SUI) lets you tailor screen configurations, customize test routines and format reports on real-time and historical performance.

Features:

• Measures throughput, back-to-back, latency and frame loss as per RFC 2544
• Performs packet-jitter measurement (frame-delay variation as per RFC 3393), assessing the capability of Ethernet transport networks to transmit delay-sensitive traffic such as voice over IP (VoIP)
• Simultaneous traffic generation and reception at 100 % wire speed for 10/100/1000Base-T, 1000Base-SX, 1000Base-LX or 1000Base-ZX full-duplex networks at all packet sizes
• Transmits and analyzes up to 10 streams, perfect for installing, commissioning and maintaining layer-2 Ethernet networks
• Dual test set feature enables end-to-end performance testing (as specified by leading standards bodies) by controlling a remote Packet Blazer via the LAN connection under test
• Tests transparent LAN services (TLS), thanks to wire-speed, full-duplex 10, 100 or 1000 Mb/s traffic-generation capabilities
• Dual test ports for lab benchmarking of Ethernet devices
• Easy-to-use smart user interface (SUI) for configurable screens, customization of test routines, as well as real-time and historical performance reporting
• EtherBERTﾙ for bit-error-rate testing of 10, 100 and 1000 Mb/s Ethernet circuits

Specifications:

Ports	Two 10/100Base-T and one Gigabit Ethernet
Connector Types	RJ-45 (ISO 8877) and LC
Connect Speed (Mb/s)	10/100/1000
Duplex mode	Full/half-duplex Auto-Negotiation
Maximum port capacity (Mb/s)	2000 (bidirectional)
Ethernet testing	RFC 2544 RFC 1242
Size (H x W x D)	2.5 cm x 9.6 cm x 26 cm (1 in x 3 in x 10 in)
Weight (without transceivers)	0.5 kg (1.1 lb)
Temperature	operating: 0 °C to 40 °C (32 °F to 104 °F) storing: -40 °C to 60 °C (-40 °F to 140 °F)

EXFO Pulse Suppressor Box

An OTDR testing essential
Combined with EXFO OTDR equipment, the Pulse Suppressor Box (PSB) enables loss measurement on the first and last connections of the fiber under test.

Choice of configurations
Typically, dead zones are about the same length as the optical pulse plus a few meters. So the Pulse Suppressor Box configuration should be longer than the pulse selected for the test session. The PSB is available in lengths of 300 m, 500 m and 1500 m, with a choice of singlemode or multimode fiber. EXFO also offers a wide range of connectors for quick connection to most OTDR and patch panel ports. The PSB is housed in a compact, field-proof case for maximum protection.

How it works
Often, the longest dead zone occurs at the first connection (the OTDR bulkhead connector). Because it is impossible to measure loss within a dead zone, loss due to splices and connectors close to the OTDR launch point cannot be determined under ordinary circumstances. However, you can work around this problem by connecting the Pulse Suppressor Box between the OTDR and the fiber under test. The length of fiber in the PSB distances the dead zone from the splices and connectors to be checked, and these crucial loss values can then be measured.

Loss from the last connector of the fiber under test can be measured in the same way, by placing the extra fiber length of the PSB after the connector. This extra fiber enables the OTDR to compare backscatter levels before and after the event to calculate the connector loss.

Features:

• Rugged and compact case
• Metal lid support prevents lid from falling and damaging patchcords

Specifications:

Size (H x W x D)	20 cm x 15 cm x 10 cm (8 in x 6 in x 4 in)
Weight	< 2.5 kg (< 5.5 lb)
External patchcord length	2 x 3 m (2 x 10 ft)
Multimode fiber 50/125 µm Attenuation Range:	850 nm 2.4 to 3.0 dB/km 1300 nm 0.6 to 1.2 dB/km

EXFO FTB-400 MINI-OTDR Fiber Mainframe w/
FTB-7323B-B-EI Singlemode 1310 / 1550nm OTDR Module w/
EXFO FTB-8510-1 Packet Blazer Module
&
FTB-PSB Pulse Suppressor Box Module

Dynamic Range:
1310 / 1550 nm : 37.5 / 35.5 dB

FTB-8510 Installed Options:
- SK-8510-1: Two 10/100Base-T and one Gigabit Ethernet Ports
- SK-TCP: THPUT TCP Throughput Measurement Application

Combined with EXFO OTDR equipment, the Pulse Suppressor Box (PSB) enables loss measurement on the first and last connections of the fiber under test

Includes Carrying Case & Accessories As Listed

FTB 7323B 400 FTB 400 FTB7323B PSB

EXFO FTB-400 FTB-7323B FTB-8510 FTB400 FTB7323B FTB8510 OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 22042 22206 22030 22208

• EXFO FTB-400 OTDR Main Frame (BC# 22042-L/T*)
• EXFO FTB-7323B-B-EI SingleMode OTDR Module (BC# 22208-L/T*)
  • SM OTDR Source:
    • 1310nm
    • 1550nm
• EXFO FTB-PSB-B-500-EI-EI Pulse Suppressor Box Module (BC# 22206-L/T*)
• EXFO FTB-8510-1 Packet Blazer Module w/ Options: (BC# 22030-L/T*)
  • SK-8510-1: Two 10/100Base-T and one Gigabit Ethernet Ports
  • SK-TCP: THPUT TCP Throughput Measurement Application
• SFP/GBE/850 MM/LC TIN Transceiver
• SFP/GBE/1310 SM/LC TIN Transceiver
• Ethernet Cable
• EXFO GP-404 4 Slot Module Bay
• SM LC-LC Duplex Fiber Cable
• MM LC-LC Duplex Fiber Cable
• (2) SM SC-SC Fiber Cables
• Stylus
• (4) Fiber Wipes
• AC Adapter/Charger
• Power Cord
• RS232 PC Interface Cable
• User Manual On CD-ROM
• Carrying Case (G)