EXFO FTB-500 FTB-7500E SM OTDR FTB-8130NGE
$0.00
Availability:
Out of stock
SKU
3F102
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Request a Quote for
EXFO FTB-500 Eight-Slot Platform
The FTB-500 platform provides boundless capabilities and expert multimodular design for true next-generation network testing.
SHAPE IT AS YOU SEE FIT
Massive processing power. Mix-and-match flexibility. Right out of multi-application wonderland.
The FTB-500 platform brings you, highly advanced applications and pushes the efficiency of your current applications to new heights. So go ahead: break new grounds, set new test-performance standards, and tame new technologies. Benefit from an allin-one platform that you can build around your most unique requirements.
FTB-500 eight-slot platform
The FTB-500 can house any of EXFOﾒs FTB plug-and-play modules, enabling you to reconfigure your test solution as your test needs evolve. Combine physical and optical characterization applications with transport and datacom test modules covering nextgeneration 10G, 40G and 100G analysis.
ENJOY TESTING AT YOUR SWIFT PACE
Faster setups. Faster testing. Faster everything.
When youﾒre ready to start your day, you want to get it started quickly. The FTB-500 ﾓunderstandsﾔ this, enabling you expedite the setup process and get down to testing so that you can get to your next location faster and breeze through your tight day-to-day schedule.
Features:
Specifications:
Features:
Specifications:
SDH/PDH
For full EXFO FTB-500 product specifications, please click here: EXFO FTB-500
The FTB-500 platform provides boundless capabilities and expert multimodular design for true next-generation network testing.
SHAPE IT AS YOU SEE FIT
Massive processing power. Mix-and-match flexibility. Right out of multi-application wonderland.
The FTB-500 platform brings you, highly advanced applications and pushes the efficiency of your current applications to new heights. So go ahead: break new grounds, set new test-performance standards, and tame new technologies. Benefit from an allin-one platform that you can build around your most unique requirements.
FTB-500 eight-slot platform
- Distributed PMD analysis
- Single-ended, span-by-span measurement of PMD, enabling targeted fiber upgrades and cost-effective deployment of 10/40/100 Gbit/s transmission.
- Full fiber characterization
- PMD, CD, OTDR/iOLM and connector inspection combined in a single solution for in-depth fiber characterization. Run FastReporter2 post-processing software while performing your acquisitions for faster data analysis and report generation directly on-site.
- 100 Gbit/s testing applications
- The most advanced hardware, ready for today and tomorrowﾒs 100 Gbit/s applications.
- ROADM/POTS and 40 Gbit/s testing
- Integrated optical and transport testing in a portable solution supporting OC-768, STM-256 and OTU3, as well as true in-band and Pol-Mux OSNR for ROADM, 40G and 100G networks.
The FTB-500 can house any of EXFOﾒs FTB plug-and-play modules, enabling you to reconfigure your test solution as your test needs evolve. Combine physical and optical characterization applications with transport and datacom test modules covering nextgeneration 10G, 40G and 100G analysis.
ENJOY TESTING AT YOUR SWIFT PACE
Faster setups. Faster testing. Faster everything.
When youﾒre ready to start your day, you want to get it started quickly. The FTB-500 ﾓunderstandsﾔ this, enabling you expedite the setup process and get down to testing so that you can get to your next location faster and breeze through your tight day-to-day schedule.
Features:
- Connects anywhere:
- USB, mobile, Wi-Fi, VPN and Bluetooth
- Loaded with utilities:
- all the tools required to maximize field testing, plus third-party applications
- Like a PC:
- Intel processor with Windows-based operating system
- EXFO Connect-compatible:
- automated asset management; data goes through the cloud and into a dynamic database
Specifications:
| Central processing unit (CPU) | Intel Core 2 Duo |
| Display | Touch screen, color TFT, 800 x 600 TFT, 307 mm (12.1 in) |
| Interfaces | Ethernet port, Fiber probe port, ExpressCard port 34 mm format, Serial RS-232 port, Monitor port, Four USB 2.0 ports, Standard PC mic in and speaker out ports (3.5 mm) |
| Storage | Internal 80 GB hard drive minimum with G-shock protection Flash USB drive (1 GB, 2 GB and 8 GB optional) ExpressCard memory card (16 GB and up, optional) External USB read/write DVD drive (optional) |
| Batteries | Eight-slot configuration: three rechargeable Li-ion smart batteries (total of 207 Wﾕh) |
| Power supply | Eight-slot configuration: AC input: 100 ﾖ 240 V; 50/60 Hz; 4.8 A |
| GENERAL | |
| Temperature | Operating: 0 ºC to 50 ºC (32 ºF to 122 ºF) Storage: ﾖ40 ºC to 70 ºC (ﾖ40 ºF to 158ºF) |
| Relative humidity | 0 % to 95 % (non-condensing) |
| Size (H x W x D) | Eight-slot configuration: 366 mm x 296 mm x 216 mm (11 11/16 in x 14 7/16 in x 8 ½ in) |
| Weight | Eight-slot configuration: 10.9 kg (24 lb) |
Features:
- Dynamic range of up to 45 dB
- Up to 256 000 sampling points
- Event dead zone of 0.8 m and attenuation dead zone of 4 m
- Industry-leading linearity of ±0.03 dB/dB
- EXFO Connect-compatible: automated asset management; data goes through the cloud and into a dynamic database
Specifications:
| Wavelengths (nm) | 1310 ± 20/1550 ± 20 |
| Dynamic range at 20 µs (dB) | 45/45 |
| Event dead zone (m) | 0.8 |
| Attenuation dead zone (m) | 4/4.5 |
| Distance range (km) | 1.25, 2.5, 5, 10, 20, 40, 80, 160, 260, 400 |
| Pulse width (ns) | 5, 10, 30, 100, 275, 1000, 2500, 10 000, 20 000 |
| Linearity (dB/dB) | ±0.03 |
| Loss threshold (dB) | 0.01 |
| Loss resolution (dB) | 0.001 |
| Sampling resolution (m) | 0.04 to 5 |
| Sampling points | Up to 256 000 |
| Distance uncertainty (m) | ±(0.75 + 0.001 % x distance + sampling resolution) |
| Measurement time | User-defined (5 sec. minimum to 60 min. maximum) |
| Typical real-time refresh (Hz | 4 |
| Stable source output power (dBm) | -1 |
FTB-8130NGE Power Blazer module
SDH Rate Options
155 = 155 Mbit/s (STM-1)
622 = 622 Mbit/s (STM-4)
2.5G = 2.5 Gbit/s (STM-16)
10G = 10G Gbit/s (STM-64)
SMARTMODE = Real-time signal discovery and alarm/error monitoring per channel
The FTB-8130NGE Power Blazer module offer a wide range of SDH test functions ranging from simple bit error rate (BER) testing to advanced characterization and troubleshooting procedures. These functions include:
- ﾛ Mixed and bulk payload generation and analysis from 64 kbit/s to 10 Gbit/s
- ﾛ High-order mappings: STS-1
- ﾛ Low-order mappings: VT1.5/2/6, TU-11/12/2/3
- ﾛ Unframed optical signal testing at 10 Gbit/s rate
- ﾛ Section/RS, Line/MS, high-order (HO) and low-order (LO) path overhead manipulation and monitoring
- ﾛ Section/RS, Line/MS, high-order and low-order path alarm/error generation and monitoring
- ﾛ High-order and low-order pointer generation and monitoring
- ﾛ K1/K2 OH byte capture
- ﾛ Tandem connection monitoring
- ﾛ Performance monitoring: G.821, G.826, G.828, G.829, M.2100, M.2101
- ﾛ Frequency analysis and power measurement
- ﾛ Payload block and replace
- ﾛ Frequency offset generation
- ﾛ DS1 loopcodes and NI/CSU loopback emulation
- ﾛ Automatic protection switching (APS) and service disruption time (SDT) measurements
- ﾛ Multichannel SDT measurements and real-time error/alarm monitoring for all STS-1/AU-4 channels
- ﾛ Round-trip delay measurements
- ﾛ DS1/DS3 auto detection of line-code framing and test pattern
- ﾛ Dual DS1/DS3 receiver testing
- ﾛ Independent transmitter and receiver testing
- ﾛ Through mode analysis
- ﾛ Intrusive Through mode
- ﾛ Programmable error/alarm injection
- ﾛ DS1 FDL
- ﾛ Fractional T1/E1 testing
- ﾛ DS3 FEAC
| FTB-8130NGE | |
| Next-generation SDH 10 Gbit/s and OTN 10.7 Gbit/s | |
| Supports up to 10/10.7 Gbit/s optical rates, as well as electrical DSn/PDH interfaces | |
| Test Interfaces | |
| SDH: STM-0e, STM-1e, STM-0, STM-4, STM-16, STM-64 | |
| DSn: DS1, DS3, Dual DS1 Rx, Dual DS3 Rx | |
| PDH: E1, E2, E3, E4 | |
| Ethernet: 10/100/1000M electrical, 100/1000M optical and 10 GigE LAN/WAN | |
| FC: 1x, 2x, 4x, 10x | |
SDH/PDH
| Optical interfaces | STM-1, STM-4, STM-16, STM-64 |
| Available wavelengths (nm) | 1310, 1550 |
| Electrical interfaces | 1.5M (DS1), 2M (E1), 8M (E2), 34M (E3), 45M (DS3), 140M (E4), STM-0e, STM-1e |
| 2M framing | Unframed, PCM30, PCM31, PCM30 CRC-4, PCM31 CRC-4 |
| 8M, 34M, 140M framing | Unframed, framed |
| Clocking | Internal, loop-timed, external (MTS/SETS), 2 MHz, inter-module |
For full EXFO FTB-500 product specifications, please click here: EXFO FTB-500
EXFO FTB-500 Eight-Slot Mainframe w/
EXFO FTB-7500E SM 1310 / 1550nm Long Haul OTDR Module &
EXFO FTB-8130NGE Transport Blazer Ethernet Test Module
Dynamic Range:
1310 / 1550 nm : 45 / 45 dB
FTB-8130NGE Installed Options:
- SK-ETHERSAM: Ethernet Service Activation Methodology Application Type
- SK-FRAME-ANALYZER: Frame Analyzer Application (Ethernet)
- SK-MLPS: Multi Protocol Label Switching
- SK-1000M-E: Ethernet 1000Base-T (Electrical) Interface
- SK-1000M-O: Ethernet 1000Base-X (Optical) Interface
- SK-100M-E-AP: Ethernet 100Base-TX (Electrical) Interface On All Ports
- SK-10M-E-AP: Ethernet 10Base-T (Electrical) Interface On All Ports
Includes Hard Carrying Case & Accessories As Listed
FTB500 FTB 500 FTB7500E FTB 7500E FTB 8130 FTB8130
EXFO FTB-500 FTB-7500E FTB-8130NGE FTB500 FTB7500E FTB8130NGE OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 19865 19866 19867
- EXFO FTB-500-S1-OCT Eight-Slot Mainframe w/ Option (BC# 19865)
- FPS: Fiber Probe Software
- EXFO FTB-7500E-0023B-EI-VFL SM Long Haul OTDR Module (BC# 19866)
- SM OTDR Source:
- 1310nm
- 1550nm
- VFL
- SM OTDR Source:
- EXFO FTB-8130NGE Transport Blazer Ethernet Test Module w/ Options: (BC# 19867)
- SK-ETHERSAM: Ethernet Service Activation Methodology Application Type
- SK-FRAME-ANALYZER: Frame Analyzer Application (Ethernet)
- SK-MLPS: Multi Protocol Label Switching
- SK-1000M-E: Ethernet 1000Base-T (Electrical) Interface
- SK-1000M-O: Ethernet 1000Base-X (Optical) Interface
- SK-100M-E-AP: Ethernet 100Base-TX (Electrical) Interface On All Ports
- SK-10M-E-AP: Ethernet 10Base-T (Electrical) Interface On All Ports
- EXFO Fiber Microscope
- Cherry USB Keyboard w/ PS/2 Adapter
- PS/2 Mouse Adapter
- Finisar FTLX1412M3BCL Transceiver
- Finisar FTLF1421P1BCL Transceiver
- Finisar FTLF1319P1BTL Transceiver
- USB To Serial Adapter P/N: UT232R-20U
- (2) SM LC-LC Fiber Cables
- (2) SM FC-FC Fiber Cables
- (2) Ethernet Cables
- (2) Bantam Cables
- (2) BNC Cables
- Stylus
- Hard Plastic Screen Cover
- Power Cord
- RS232 PC Interface Cable
- Hard Copy User Manual
- Hard Carrying Case (G)