EXFO LFD-100 Live Fiber Detector LFD 100
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
- Detects traffic, optical tones,and continuous signals
- Indicates power and direction
- Displays absolute orrelative power
- Uses macrobend technique,safe for fiber
- Adapts to three fiber sizes withits universal head
- Avoids disruption with its lowinsertion loss
Insightful instrument
The LFD-100 detects traffic and measures signals anywhere on singlemode and multimode fibers without having to disconnect them. You can check for signal presence before re-routing or maintenance, perform continuity tests, and verify cable labeling. The LFD-100 uses a safe macrobending technique that neither disrupts traffic nor damages or overstresses the fiber. You end up with precise information reliably and efficiently.
Fast, simple, and complete diagnosis
When you turn the unit on, it performs a selftest after which you begin testing fibers. Clamp the LFD-100 onto a fiber; within seconds, a beep sounds, and a highcontrast, multifunction LCD provides you with a complete status report including
- signal presence or absence (live or dark fiber)
- signal type (customer traffic, continuous or modulated test signal at 270 Hz, 1 kHz, or 2 kHz)
- signal direction
- absolute core power within 2 dBm*
Unique relative reading feature
Get the most out of your live fiber detector by using its accurate relative measurement feature. This feature provides you with a display resolution of 0.1 dB and is perfect for optimizing connector and rotary splice alignment. The LFD-100 can effectively replace a power meter while you optimize fiber placement in a tray to reduce loss. You can also use the LFD-100 to monitor core power while making adjustments nearby.
Universal adjustable head
Its revolutionary, adjustable clamping mechanism and unique, non-removable head adapts to just about any fiber size and type, including color-coated fibers and yellow patchcords*. You can even clip safely onto a 12-fiber ribbon cable.** Simply set the selector to 250 µm, 900 µm, or 3 mm, and clamp. It is a one-piece unit, so you do not have to be concerned about losing test head adapters.
* Some restrictions apply. See specifications on the other side.
** Signal detection is limited to the six middle fibers
SPECIFICATIONS
Calibration | 1310 nm in a 250 µm Corning SMF-28 clear fiber with matched cladding |
Maximum power measured (dBm) | |
typical | 15 |
Maximum power handling (dBm) 25 | |
CW sensitivity (dBm) | -47 at 1310 nm |
-56 at 1550 nm | |
-42 at 850 nm (multimode 50/125 µm matched-cladding fibers) | |
Accuracy (dB) | ±2 at 1310 nm |
Insertion loss (dB) | typical/maximum 0.4/0.8 at 1310 nm |
2.2/2.6 at 1550 nm | |
<0.6 at 850 nm (multimode 50/125 µm matched-cladding fibers) | |
Display resolution in dBm mode (dB) | 1 |
Display resolution in dB mode (dB) | 0.1 for power readings above -50 dBm |
1 for power readings below -50 dBm |
GENERAL SPECIFICATIONS
Size (H x W x D) | 24 x 6.4 x 2.5 cm | 9 5/16 x 2 1/2 x 1 in. | |
Weight (with battery) | unit | 0.32 kg | 0.70 lb. |
shipping | 0.9 kg | 2 lb. | |
Battery | Standard 9 V alkaline battery | ||
Battery life | 8 to 10 hours (beeper reacts according to type of signal and influences related power drain). Low battery indicator | ||
Temperature | operating | -10° to 50°C | 14° to 122°F |
storage | -40° to 60°C | -40° to 140°F | |
Humidity | 0 to 95% non-condensing | ||
Detected signals | Traffic, CW, and modulated identification | ||
tone (270 Hz, 1 kHz, and 2 kHz) | |||
Measurement time | Approximately 1.5 seconds | ||
Auto-off time-out | 5 minutes after the last operation or | ||
10 seconds after failed self-test |
EXFO LFD-100 Live Fiber Detector
The LFD-100 detects traffic and measures signals anywhere on singlemode and multimode fibers without having to disconnect them
Includes Carrying Case And Accessories As Listed!
LFD100 LFD 100
EXFO LFD-100 LFD100 Live Fiber Detector Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 37606-L/T*
- EXFO LFD-100 Live Fiber Detector (BC# 37606-L/T*)