FiTeL Ninja NJ001 SM MM Fiber Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
FiTeL Ninja NJ001 Fusion Splicer
The FITEL NINJA NJ001 Hand-Held Single Fiber Fusion Splicer is suitable for all METRO, LAN and FTTx fibers including ultra bend-insensitive fibers. With its low-profile, compact and ruggedized body, the NJ001 offers reliable splicing under harsh environmental conditions. The large battery capacity makes it possible to perform 100 splicing and heating cycles. Combining portability, power, flexibility and field ruggedness, the NJ001 delivers fast and consistent splicing with outstanding mobility and optimal ease of use.
Spacious splicing chamber
The NJ001 is one of the most user-friendly splicers in the field thanks to its wide splicing chamber in relation to its size. Compared to its predecessor (S123C) there is 4 times more space around the fiber holders for easy fiber loading.
3 LED lamps
With an light intensity of > 300 Lux, 3 LED lights illuminating the entire splicing chamber make it easier to perform work in a dark environment. The light on the V-groove is 6 times brighter than that of its predecessor (S123C).
The industry’s first detachable V-groove
The NJ001’s V-groove is detachable for easy cleaning and optimal maintenance.
Features:
- Wide splicing chamber allowing easy fiber loading
- 3 LED lamps
- Brightly illuminating a wide area of the splicing chamber in a dark environment.
- High propulsion motor
- A powerful motor with a propulsion of 8N guarantees stable splicing even for highly rigid cables including drop and indoor cables.
- Ruggedized design
- The ruggedized body is designed to endure shocks, impact, water and dust.
- Internal battery charging
- Compatibility with Splice-on-Connector (SOC)
- The detachable heater clamp allows work with SOC.
- 100 cycles (Splicing and Heating) on a fully charged S946 Battery
- Available for ALL METRO/LAN/FTTx fibers including ultra bendinsensitive fibers
- Easy maintenance
- The industry’s first detachable V-groove allows ease of cleaning and maintenance. The NJ001 also features tool-less electrode replacement and mirror free alignment system.
- PC interface software
- Easy software upgrades, splice management, program editing and exportation of splice results
- Auto-start function
- Heating and splicing processes.
Specifications:
| Applicable Fibers | SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653), NZD (ITU-T G655), BIF/UBIF (Bend Insensitive Fiber ITU-T G.657) |
| Cladding Diameter | 125 µm |
| Coating Diameter | 160 to 900 µm |
| Fibers Cleave Length | 5 to 10 mm or 16 mm |
| Average Splice Loss | SM: 0.05 dB, MM: 0.02 dB, DSF 0.08 dB, NZD 0.08 dB, BIF/UBIF: 0.05 dB |
| Splice Time | 13 seconds |
| Heat Time | 17 seconds (40 mm sleeve)) , 20 seconds (60mm sleeve)) (Pre-heat mode)) 31 seconds (S922: 40 mm sleeve, S921: 60 mm sleeve) (Regular mode)) |
| Splice Programs | Max. 150 |
| Heat Programs | Max. 30 |
| Automatic Heating Start | Available |
| Applicable Sleeves | 20/40/60 mm |
| Fiber Holder | Tight holder (Loose tube applicable) or Removal fiber holder system |
| Tension Test | 1.96 N |
| Splice Return Loss | 60 dB or more |
| Fiber Image Magnification | 58X |
| Splice Memory | Max. 1500 |
| Image Capture Capacity | Last 100 images to be automatically captured + Up to 24 images to be stored permanently |
| Dimension | 124W × 161D × 64.5H mm (not including rubber pad) 139W × 176D × 71H mm (including rubber pad) |
| Weight | 970 g (with S946 battery) |
| Monitor | 3.5” color LCD monitor |
| Propulsion (motor) | 8 N (Designed value) |
| Data Output | USB ver. 2.0 mini |
| Battery Capacity | Typically 100 splice/heat cycles |
| Wind Protection | Max. wind velocity of 15 m/s. |
| Operating Temperature | -10 to 50°C (without excessive humidity) |
| Storage Temperature | -40 to 60°C (without excessive humidity) |
| Humidity | 0 to 95% RH (non-condensing) |
| Power Source | AC input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V without any change of hardware |
For full FiTeL Ninja NJ001 product specifications, please click here: FiTeL Ninja NJ001
FiTeL Ninja NJ001 SM MM Detachable V-Groove Fiber Fusion Splicer
The FITEL NINJA NJ001 Hand-Held Single Fiber Fusion Splicer is suitable for all METRO, LAN and FTTx fibers including ultra bend-insensitive fibers.
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
Includes FiTeL S326 High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed
NJ 001 NJ-001
FiTeL NJ001 NJ-001 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 44636-L/T* 24217M-L/T*
- FiTeL Ninja NJ001 SM MM Fiber Fusion Splicer (BC# 44636-L/T*)
- FiTeL S326 High Precision Fiber Cleaver w/ Case (BC# 24217M-L/T*)
- Clauss CFS-2 Fiber Optic Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- 250 Fiber Holder Set
- 900 Fiber Holder Set
- USB PC Interface Cable
- AC Adapter/Charger
- Power Cord
- User Manual On CD-ROM
- Hard Carrying Case