FiTel S199M4 Ribbon Fiber Fusion Splicer S199
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
The FITEL FUSION SPLICER S199 series are compact designed and high performance fusion splicers.
Line-up
Model Applicable Fiber Type and Fiber Count S199M4 SMF, MMF, DSF, NZDSF up to 4-fiber ribbon
Description
Used for ribbon-type fiber splicing in Outside Plant and Long-Haul applications.
S199M4 Fusion Splicer splices up to 4 ribbon fiber.
After setting the prepared fibers, S199M4 splicer automatically feeds the fiber ends and inspect their cleave condition, axis offset, and so on. Then the splicer discharges the arc to melt the glass and butts the end together. S199M4 has the heater applied 40 and 60mm protection sleeve for reinforcing the spliced fiber. The S199M4 splicer can be powered by an AC/DC converter or Battery. The Battery is made of Ni-MH cells and is charged by the AC/DC converter.
Features
- Small & Portable
- Small compact size with insertable battery.All models use same body case.
- Large Monitor
- 5-inch low reflection LCD is used. Can be clearly seen even under strong sunlight.
- Quick Splice Time
- Fibers are simultaneously inspected by two CCD cameras. As a result, the entire splicing process is very fast. Average splice time is 30 seconds.
- Embedded Self Diagnosis Function
- Before carrying out real splicing, the embedded diagnosis function can help the user check the status of the machine.
- Fiber Position Adjustment Button
- Fiber position adjustment button can help the user to fine tune the fiber position in the v-groove.
- White LED Lamp
- White LED lamp can help the user to set up fiber in dark environments.
- Battery Life Indicator
- Battery life remaining can be checked on screen.
- Wind Proof
- Splicer can withstand wind up to 33 mph (15m/s) without being affected.
- Fan Embedded Heater
- With the help of an embedded fan, fiber reinforcement time can be shortened.
- Auto Tension Absorbtion
- Heater clamps can automatically absorb and adjust fiber's tension.
- Arc Check
- Arc check function can help machine to automatically adjust the arc discharge conditions based on the environmental condition. This is important for low-loss splicing.
- Data Memory
- The splicer can store data up to a maximum of 250 splices.
FiTeL S199M4 S-199M4 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- FiTeL S199M4 Fusion Splicer
- FiTeL S323 Optical Fiber Cleaver
- CFSII Fiber Optic Stripper
- FiTeL S950 AC/DC Charger
- FiTeL S940 Battery Pack
- FiTeL 2A Fiber Holder Set
- SM4 Fiber Holder Set
- 250?m SM Fiber Holder Set
- Protective Screen Cover
- Cooling Tray
- DC Charger Cord
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Hard Carrying Case