FiTeL S122A Fusion Splicer Anritsu MT9081D OTDR
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
FITEL S122A
With its super low profile and new user interface, the FITEL S122A Fusion Splicer offers next generation workability for every field fusion splicing application: FTTx, LAN, backbone or long-haul installations.
Combining the portability and ruggedness of FITEL's previous generation handheld units with its proven high-quality single fiber splicing capabilities (call us for the ribbon fiber version), the S122A delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use. The fast and accurate S122A features a rugged body as well as a new GUI & LCD Screen, multi-window fiber display and enhanced ease of use.
The fast 13-second splice time and 37-second heat time creates a highly
efficient work environment. The S122A observes the fiber from two directions,
promising high quality splice from trunk to FTTx. A super low profile design,
with only 1.85ヤ height at the keypad, the S122A provides a stable working
environment both on the work bench and palmtop.
The top body and windshield are made of magnesium die-cast for durability.
The bottom body is protected with rubber corner pads. With its simple and flat
shape, the S122A can survive during harsh conditions. Featuring a new GUI
(graphical user interface) and transreflective LCD screen technology, the S122A
operation is a snap! Function keys are simple and information displays are crisp
and clear even in direct sunlight. The LCD display shows the splicing process
with simultaneous X and Y camera views, allowing you to achieve perfect
alignment every time, as well as status icons monitoring the machine conditions.
Memory for fiber image, counters for cleaver and stripper blade replacement and
visual maintenance instructions are provided for your ease of use.
Package includes Splice Body, soft carrying case, straps, 250um fiber holders (pair), Li-ion battery, AC adapter, battery recharger, electrodes (pair), electrode cleaning disk and user manual.
Features:
- Splicing for single fiber using fiber holder system
- 40% reduction in weight, just 2.2 lbs. with battery
- 40% larger transflective LCD screen, viewable in direct sunlight
- New GUI interface with intuitive icons and function keys
- Simultaneous X and Y fiber views
- 50% reduction in heat time bringing total splice/heat time under 60 seconds
S122A Splicer Specifications | |
Fiber Types: | SMF, MMF, DSF, NZDSF |
Cladding Diameter: | 125um |
Coating Diameter: | 250um to 900um single fiber |
Splicing Method: | 2-axis cladding alignment |
Splice Loss: | SMF 0.05dB MMF 0.03dB DSF 0.08dB NZDSF 0.08dB |
Splice Time: | 13 seconds |
Heat Time: |
|
Programs Memory: | Splice Programs: Max. 150 Heat Programs: Max. 12 |
Splice Memory: | Max. 1,500 |
Fiber Image Display: | Simultaneous two-axis display. Magnification 120X |
Dimensions: | 5.5"W x 7.4"L x 2.9"H |
Weight: | 2.5 lb. body, 0.4lb. battery |
Battery Life: | 90 splices or 50 splices with heat shrink protection |
Anritsu MT9081D
The MT9080 Series ACCESS Master is provided with the functions that are required to perform diagnosis of optical fibers fault on optical fiber lines, specifically FTTH lines.
Table 1.1-1 MT9080 Series ACCESS Master functions
Function | Characteristics | Usage | |
<1> | Optical Pulse Testing (OTDR: Optical Time Domain Reflectometer) |
Wavelength: 1.31/1.55/1.65 ᄉm SM (The wavelength varies depending on the model.) Fresnel event dead zone: 1 m Fault Locate and Trace Analysis modes |
Breaking point, splice loss, fiber loss, and distance measurement |
<2> | Optical Power Meter (OPM: Optical Power Meter) |
Measurement range: -50 to -5 dBm, Accuracy of measurement: ᄆ6.5% |
Communication light power level measurement |
<3> | Fiber Identification Light Source (OLS: Optical Light Source) |
Optical output: > -8 dBm Modulation frequency: CW / 270 Hz/1 kHz/2 kHz, Wavelength: 1.31/1.55/1.65 ᄉm (The wavelength varies depending on the model.) |
Optical light source for fiber identification equipment (ID tester) |
<4> | Visible Light Source (VLD: Visible Laser Diode) (Option 02) |
Wavelength: 650 nm Optical output: > -3 dBm |
Visual reference for fiber identification of optical fiber by bending.
Detection of breaking profile in OTDR dead zone. |
<5> | IP Network Connectivity Check Function (IP)(Option 001) |
10/100Base-T/1000BASE-T (Option 011) Connectivity check (PPPoE, DHCP) Connection test (Ping, trace route) Download throughput measurement Throughput measurement Counter measurement |
Check of connection to the IP network (PPPoE session establishment,
etc.) Download throughput speed evaluation |
<1> Optical Pulse Testing (OTDR)
Capable of measuring the connection loss, fiber loss, and distance of an optical fiber line. You can find the fault position of a breakage. This function works in two modes: Fault Locate and Trace Analysis. In both modes, the function automatically detects event positions such as splice points with loss exceeding the preset threshold or return loss, and lists the data in an event table. In the Fault Locate mode, possible fault points of the detected events are also listed at the upper right corner of the screen
<2> Optical Power Meter (OPM)
Capable of measuring the optical power level. By measuring the communication light power level in the customerメs system, you can easily decide whether the fault point is on the optical fiber or network.
<3> Optical Light Source (OLS) for Fiber identification
Available as the light source for fiber identification equipment (ID tester). CW light or modulation light of 270 Hz/1 kHz/2 kHz is output. (CW light is available for the MT9081x only.)
<4> Visible Light Source (VLD)
Works as the visible light source by means of a red laser diode. Available for visual fiber identification by visual means, fiber identification by bending, detection of breaking points within the OTDR dead zone, and other purposes.
<5> IP Network Connectivity
Check Function PPPoE connection check, Ping test, trace route test, download throughput measurement, throughput measurement, and counter measurement are available by connecting to an Ethernet interface (10/100/1000Base-T) such as ONU. Refer to the MT9080 Series ACCESS Master IP Network Connectivity Check Function Operation Manual for details.
Visible Light Source (Option 002)
Allows you to get visual information about faults in the optical fiber.
IP Network Connectivity Check Function (Option 001)
Allows you to check connectivity with the network
Key Character Displays (Option 009 English)
These designate the language in which characters are represented on the key panel.
Protector (Option 010)
Useful for outdoor use. Provides a protective cover on the front panel and shoulder cover.
Item | Specifications |
Optical power meter (OPM) function |
|
Applicable fiber | SM fiber (ITU-T G.652) |
Wavelength setting | MT9080A/B/D (1310/1550 nm port): 1310/1550/1625/1650 nm |
Optical connector | Shared with OTDR |
Optical power measurement range | -50 to -5 dBm (peak power) Wavelength: 1550 nm absolute maximum rated input: +10 dBm |
Measurement accuracy | ᄆ6.5% (-20 dBm, CW light, 23ᄚC ᄆ2ᄚC, after executing zero offset, Wavelength: 1550 nm) |
Other functions |
|
Display | 6.2-inch monochrome LCD (Option 04, 640 � 480 dots, with backlight, semi-transparent) |
Interface | USB 1.1 Type A � 1 (memory) Type B � 1 (USB mass storage class; the internal memory of the MT9080 series product can be read/written as a PC disk drive by connecting with the PC via a USB cable.) |
Laser safety | 21CFR Class I IEC Pub 60825-1 Class 1 |
Item | Specifications | Remarks |
Power supply | DC: 10.8 to 15 V AC: Rating: 100 to 240 V Allowable input voltage range: 90 to 264 V Rated frequency: 50/60 Hz (when using the dedicated AC adapter) Battery pack: DR15SBA available |
|
Power consumption | 20 W max. (when charged) Standard 5 W (with backlight Off, sweeping halted) |
|
Battery operating time | Continuous operating time: 6.5 hours (typical) | * With backlight Off, sweeping halted, at 25ᄚC |
Battery charging time | 3 hours or shorter | With power Off, temperature range: 0 to +30ᄚC |
Dimensions (excluding protrusion) |
254 (W) � 162 (H) � 61 (D) mm | |
Mass | 2 kg or less 2.2 kg or less |
Main body only, excluding options Including battery pack, excluding options |
Environmental conditions | ||
Operating temperature, humidity |
0 to +40ᄚC, =85% (=80% when using AC adapter) During battery charge: 0 to 30ᄚC (power Off) |
No condensation |
Storage temperature, humidity |
-20 to +60ᄚC, =85% | |
Vibration | Conforms to MIL-T-28800E Class 3 | |
EMC | EN61326: 1997/A2: 2004 (Class A) EN61326: 1997/A2: 2004 (Annex A) |
FiTeL S122A Handheld Singlemode Multimode V-groove Fusion
Splicer
&
Anritsu MT9081D SM ACCESS Singlemode 1310nm / 1550nm Fiber
OTDR With Power Meter & Options: 001, 002, 009 And 010.
Dynamic Range
SM 1310nm / 1550nm: 38dB/36.5dB
Installed Options:
- Option 002: Visible Light Source
- Option 001: IP
Network Connectivity Check Function
- Option 009: Key Character Display
(English)
- Option 010: Protector
Includes 6 Month Fusion Splicer Care Kit
- 4oz Flip Jar Of 99%
Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99%
Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
-
(25) V-Groove Swabs
This Fusion Splicer Is Perfect For Field Use, Includes 52" Extendable Tripod!
Includes USFiberOptic USF-21 High Precision Fiber Cleaver, Hard Carrying Cases & Accessories As Listed!
- FiTeL S122A Fusion Splicer
- USFiberOptic USF-21 High Precision Fiber Cleaver w/ Hard Case
- Single Fiber Holder Sets:
- S7095-250µm
- 900µm
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- Clauss Fiber Optic Strippers
- FiTeL S943B Batery Pack
- FiTeL S958B Li-Ion Battery Charger w/ AC Adapter
- 52" Extendable Tripod
- Power Cord
- User Manual On CD-ROM
- Hard Carrying Case
- Anritsu MT9081D SM ACCESS OTDR
- Source:
- 1310nm
- 1550nm
- Interchangeable SC Connector
- Power Meter:
- 1310nm
- 1550nm
- 1625nm
- 1650nm
- Option 002: Visible Light Source
- Option 001: IP Network Connectivity Check Function
- Option 009: Key Character Display (English)
- Option 010: Protector
- Source:
- Fiber Cables:
- (2) SM SC-SC
- (2) SM SC-ST
- Battery Pack
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- (2) Cat5e Ethernet Cables
- User Manual On CD-ROM
- Case For Unit
- Hard Carrying Case