The Simply Powerful Intrinsic Safe Calibration Tool
The new 725Ex Intrinsically Safe Multi-function Process Calibrator is powerful yet easy-to-use. Combined with one of the (8) new Fluke-700PEx pressure modules, the 725Ex is able to calibrate almost any process instrument likely to need service in an area where explosive gasses may be present.
Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
Do you need to calibrate transmitters? The 725Ex split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725Ex has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.
From the moment you pick it up, the Fluke 725Ex is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.
Features:
Use the measure and source functions to test and calibrate almost any process parameter. The Fluke 725Ex Intrinsically Safe Calibrator is a powerful, multi-function calibration solution that offers:
- ATEX II 1 G Ex ia IIB 171°C KEMA 04ATEX 1303X
- I.S. Class I, Division 1 Groups B-D, 171°C compliance
- Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
- Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
- Two channel simultaneous source and measure capability for calibration of transmitters
- Power transmitters with internal loop supply
- Store frequently-used test setups for later use
- Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
- Pressure switch test function to capture set, reset and deadband values
- Compact size and weight
- Simple, push-button user interface
- Rugged and reliable, for field use
Specifications:
| Measurement Accuracy |
| Voltage DC |
| 30.000 V |
0.02%+ 2 counts (upper display) |
| 10.000 V |
0.02%+ 2 counts (lower display) |
| 90.00 mV |
0.02%+ 2 counts |
| -10.00 mV to 75.00 mV |
0.025 % + 1 count (via TC connector) |
|
| Current DC |
| 24.000 mA |
0.02%+ 2 counts |
|
| Resistance |
| 0.0 to 400.0 O |
0.1O (4-wire), 0.15O (2- and 3-wire) |
| 401 to 1500 O |
0.5O (4-wire), 1O (2- and 3-wire) |
| 1500 to 3200 O |
1O (4-wire), 1.5O (2- and 3-wire) |
|
| Frequency |
| 2.0 to 1000.0 CPM |
0.05 % + 1 count |
| 1.0 to 1100.0 Hz |
0.05 % + 1 count |
| 1.00 to 10.00 kHz |
0.05 % + 1 count |
| Sensitivity |
1 V peak-to-peak-minimum |
|
| Pressure |
| Accuracy |
from 0.025% of range using any of 8 intrinsic safe pressure modules. |
 |
(for detailed specifications refer to pressure modules in options and accessories) |
|
Modules available for differential, gage, vacuum, absolute, dual and high pressure. |
|
| Source Accuracy |
| Voltage DC |
| 100.00 mV |
0.02%+2 counts |
| 10.000 V |
0.02%+2 counts |
| -10.00 mV to 75.00 mV |
0.025 % + 1 count (via TC connector) |
|
| Current DC |
| 24.000 mA (Source) |
0.02%+ 2 counts |
| 24.000 mA (Simulate) |
0.02%+ 2 counts |
|
| Resistance |
| 15.0 to 400.0 O |
0.15 O (exc. current 0.15 to 0.5 mA), 0.1 O (exc. current 0.5 to 2 mA) |
| 401 to 1500 O |
0.5 O(excitation current 0.05 to 0.8 mA) |
| 1500 to 3200 O |
1 O(excitation current 0.05 to 0.4 mA) |
|
| Frequency |
| 2.0 to 1000.0 CPM |
0.05% |
| 1.0 to 1100.0 Hz |
0.05% |
| 1.00 to 10.00 kHz |
0.25% |
| Waveform: |
5 V p-p squarewave, -0.1 V offset |
|
| RTDs and Thermocouples |
| Measure Accuracy: |
| NI-120 |
0.2 °C |
| PT-100 (385) |
0.33 °C |
| PT-100 (393) |
0.3 °C |
| PT-100 (JIS) |
0.3 °C |
| PT-200 (385) |
0.2 °C |
| PT-500 (385) |
0.3 °C |
| PT-1000 (385) |
0.2 °C |
| Resolution: |
0.1 °C |
| J: |
0.7 °C |
| K: |
0.8 °C |
| T: |
0.8 °C |
| E: |
0.7 °C |
| R: |
1.8 °C |
| S: |
1.5 °C |
| B: |
1.4 °C |
| L: |
0.7 °C |
| U: |
0.75 °C |
| N: |
0.9 °C |
| Resolution |
J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F |
| XK |
0.6°C |
| BP |
1.2°C |
|
| Source Accuracy: |
| NI-120 |
0.2 °C |
| PT-100 (385) |
0.33 °C |
| PT-100 (393) |
0.3 °C |
| PT-100 (JIS) |
0.3 °C |
| PT-200 (385) |
0.2 °C |
| PT-500 (385) |
0.3 °C |
| PT-1000 (385) |
0.2 °C |
| Resolution: |
0.1 °C |
| Note: |
Accuracy stated for 4-wire measurement. |
| J: |
0.7 °C |
| K: |
0.8 °C |
| T: |
0.8 °C |
| E: |
0.7 °C |
| R: |
1.4 °C |
| S: |
1.5 °C |
| B: |
1.4 °C |
| L: |
0.7 °C |
| U: |
0.75 °C |
| N: |
0.9 °C |
| Resolution |
J, K, T, E, L, N, U: 0.1 °C, B, R, S: 1 °C |
| XK |
0.6°C |
| BP |
1.2°C |
|
| Specifications |
| Ramp Functions |
| Source functions: |
Voltage, current, resistance, frequency, temperature |
| Ramps |
Slow ramp, Fast ramp, 25% step-ramp |
|
| Loop Power Function |
| Voltage: |
12 V |
| Accuracy: |
10% |
| Maximum current: |
22 mA, short circuit protected |
|
| Step Functions |
| Source functions: |
Voltage, current, resistance, frequency, temperature |
| Steps |
25% of range, 100% of range |
|
| Safety Specifications |
| Agency Approvals |
|
ATEX II 1 G Ex ia IIB 171°C |
|
I.S. Class I, Division 1 Groups |
|
| Mechanical & General Specifications |
| Size |
|
130 x 236 x 61 mm |
|
5.188" x 9.291" x 2.402" |
|
| Weight |
|
0.85 kg (1.874 lbs.) |
|
| Batteries |
|
4 AA alkaline batteries |
|
| Battery Replacement |
|
Separate battery compartment, accessible without breaking calibration seal |
|
| Side port connections |
|
Pressure module connector |
|
For full Fluke 725 EX specifications, please click here:
Fluke 725 EX
Fluke 725Ex Intrinsically Safe Multi-function Process Calibrator
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Includes Carrying Case & Accessories As Listed
Fluke 725Ex Fluke-725Ex Process Calibrator Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 24900-L/T*
