On Sale! Fluke 726 Process Calibrator Model Fluke-726 Fluke 726

Description

Fluke 726 Precision Multifunction Process Calibrator

More Calibration Power! The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis.

Features:

More precise measurement and calibration source performance, accuracies of 0.01%.
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Measure or source pressure* using any of 29 Fluke 700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Transmitter error% calculation, interpret calibration results without a calculator
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement.
New voltage input protection design for improved reliability

Measurement Accuracy

Voltage DC

30.000 V	0.01%+ 2 mV (upper display)
20.000 V	0.01%+ 2 mV (lower display)
90.00 mV	0.01%+ 10µV
-10.00 mV to 75.00 mV	0.025 % + 1 count (via TC connector)

Current DC

24.000 mA

0.01%+ 2 mA

Resistance

0.0 to 4000.0 O

+/- 0.015%

Frequency

2.0 to 1000.0 CPM	0.05 % + 0.1 cpm
1.0 to 1000.0 Hz	0.05 % + 0.1 Hz
1.00 to 15.00 kHz	0.05 % + 0.01 kHz
Sensitivity	1 V peak-to-peak-minimum

Pressure

Accuracy	from 0.025% of range using any of 29 pressure modules.
	(for detailed specifications refer to pressure modules in options and accessories)
	Modules available for differential, gauge, vacuum, absolute, dual and high pressure.

Source Accuracy

Voltage DC

100.00 mV	0.01%+10 µV
20.000 V	0.01%+2 mV
-10.00 mV to 75.00 mV	0.025 % + 1 count (via TC connector)

Current DC

24.000 mA (Source)	0.01%+ 2 µA
24.000 mA (Simulate)	0.01%+ 2 µA

Resistance

Range, Accuracy (Percent of reading + floor) and Excitation Current	5 to 400 O, 0.015% + 0.1 O, 0.1 to 0.5mA
	5 to 400 O, 0.015% + 0.05 O, 0.5 to 3mA
	400 to 1500 O, 0.015% + 0.5 O, 0.05 to 0.8 mA
	1500 to 4000 O, 0.015% + 0.5 O, 0.05 to 0.4 mA

Frequency

2.0 to 1000.0 CPM	0.05%
1.0 to 1000.0 Hz	0.05%
1.0 to 10.0 kHz	0.25%
10.0 to 15.0 kHz	0.5%
Waveform:	5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples

Measure and Source Accuracy:

Cu10	1.8 °C
NI-120	0.15 °C
PT-100 (385)	0.45 °C
PT-100 (392)	0.35 °C
PT-100 (391-JIS)	0.35 °C
PT-200 (385)	0.95 °C
PT-500 (385)	0.55 °C
PT-1000 (385)	0.35 °C
RTD Resolution:	0.01 C (0.01 F)
Cu10.01 C	0.1 C (0.1 F)
J:	0.4 °C
K:	0.5 °C
T:	0.4 °C
E:	0.4 °C
R:	1.4 °C
S:	1.4 °C
B:	1.4 °C
L:	0.45 °C
U:	0.45 °C
N:	0.6 °C
XK:	0.4 °C
BP:	1.1 °C
TC Resolution	J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F

Specifications

Ramp Functions

Source functions:	Voltage, current, resistance, frequency, temperature
Ramps	Slow ramp, Fast ramp, 25% step-ramp

Loop Power Function

Voltage:	24 V
Accuracy:	10%
Maximum current:	22 mA, short circuit protected

Step Functions

Source functions:	Voltage, current, resistance, frequency, temperature
Steps	25% of range, 100% of range

Environmental Specifications

Operating Temperature

-10 °C to +55 °C

Storage Temperature

-20 °C to +71 °C

Operating Altitude

3000 m

Safety Specifications

Agency Approvals

EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992

Mechanical & General Specifications

Size

200mm x 96mm x 47mm (7.9 in x 3.8 in x 1.9 in)

Weight

650 g (23 oz.)

Batteries

4 AA alkaline batteries

Battery Replacement

Separate battery compartment, accessible without breaking calibration seall

Side port connections

Pressure module connector, also used for remote real-time programming

For full Fluke 726 product specifications, please click here: Fluke 726

Additional Information

Fluke 726 Precision Multifunction Process Calibrator

Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters

Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters

Integrated pressure switch test allows you to capture the set, reset and deadband of a switch

Power transmitters during test using 24 V loop supply and simultaneous mA measurement

Includes Carrying Case & Accessories As Listed

Fluke 726 Fluke-726 Process Calibrator Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 40138-L/T*

Included