Fluke 99B 100MHz 2CH 5GSa/s Scopemeter

Fluke 99B ScopeMeter

The new ScopeMeter IIB with ultra bright high contrast display uses sophisticated technology to provide 25 MSPS acquisition rate and 100MHz bandwidth.  The Series IIB features random repetitive sampling rates of 5 Gigasamples/sec. Your ScopeMeter test tool combines the capabilities of an easy-to-use digital storage oscilloscope with the versatility of a digital multimeter. When you select a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels.


ScopeMeter test tool features include:

• Digital Storage Oscilloscope.
• 3 2/3-digit, 5-MHz Digital MultiMeter (DMM).
• Battery power.
• Measure menu for quick setup.
• Continuous Auto Set? function for hands-off signal probing.
• Large memory for front panel Setups, Waveforms, and Screens.
• Min Max TrendPlot? function with time stamp for long term recording.
• Optical to RS-232 interface port, 600V isolation.
• Instant Information key.

Specifications:

 

Scope Mode
Vertical	Bandwidth 100 MHz (Fluke 105B and Fluke 99B) Coupling AC, DC, Ground Sensitivity 1 mV to 100 V/div (With included 10:1 probe measure up to 600 Vrms) Modes A, -A, B, -B, A+B, A-B, X vs. Y Vertical resolution 8 bits (256 levels) Accuracy ¡¾(2% of reading +1 pixel)
Horizontal	Range 5 ns/div to 60 s/div (Fluke 105B and Fluke 99B) Acquisition modes Recurrent, Single shot, Envelope, Roll, Glitch detect, Average, ScopeRecordâ?¢ Maximum sample rate 5 GS/s (Fluke 105B and Fluke 99B),  for repetitive signals; 25 MS/s for single shot, all models Maximum record length Scope Recordâ?¢(Fluke 105B, 99B & 96B only) 30k (up to 20ms/div-1 ch) 15k (up to 20ms/div-2 ch) 512 samples per channel (up to 5ns/div) (all models) Accuracy ¡¾(-0.1% of reading +1 pixel)
Trigger	Source Input A, Input B, External Modes Free run, Triggered, Single Types Edge, Video, Event, N-cycle Video Triggers on Field 1, Field 2, Lines or selectable line number Interlaced video NTSC, PAL, PAL/M, SECAM, User selectable 2-Field or 4-Field sequence Non Interlaced video Line selection up to 3200 lines Line frequency 14 kHz to 65 kHz Time delay Up to 20 divisions pre trigger view Up to 640 divisions trigger delay
Cursor Measurements	(Fluke 105B, 99B and 96B only) Up to 5 displayed simultaneously, Vrms (AC), Frequency, Vmean (DC), Risetime, Vpeak-peak, Time between cursors, Vmax-peak, Time at cursors (Time of day or Time from start), Vmin-peak, Phase dV between cursors, V at cursors. Measurements can be scaled to Amperes. Readouts in % change or delta-zero.
Waveform Mathematics	(Fluke 105B and 99B only) Add, multiply, filter, subtract, invert, integrate. Instantaneous or mean watts with optional current probes.
Zoom	Adjustable magnification. Allows full 30k record overview, or zoom in to single sample resolution.
Memory Save and Recall	(Fluke 105B, 99B and 96B only) Setup Memories 40 for Fluke 105B and 99B, Waveform Memories 20 for Fluke 105B and 99B, Screen Memories 10 for Fluke 105B and 99B,
Meter Mode	DC Voltage Ranges 100 mV to 300V (With included 10:1 probe measure up to 600 Vrms) Accuracy ¡¾(0.5%+5 counts)
	AC or AC+DC true rms Voltage Ranges 100 mV to 250V (with included 10:1 probe measure up to 600 Vrms) Accuracy 50 Hz to 60 Hz ¡¾(1%+10 counts) 20 Hz to 20 kHz ¡¾(2%+15 counts) 5 Hz to 1 MHz ¡¾(3%+20 counts) DC to 5 MHz ¡¾(10%+25 counts)
Additional Measurements	Continuity, Diode test, Amps, Hz, ¡�C or ¡�F, Pulse Width, Duty Cycle, RPM, dBm, dBV, dBW, Audio or RF Watts. (Amps, ¡�C or ¡�F with Optional Probes)
Advanced METER Functions	Touch Hold®, Change Alert�, Smoothing�, Continuity Beeper. Readouts in % change, % scale or delta-zero.
MIN MAX Trend Plot	Chart recording function to log MIN, MAX, and AVERAGE readings. Displays all 3 readings as graphs with time and date stamp. Automatic vertical scaling and horizontal time compression for recording from 120 seconds to 40 days.
Signal Generator	(Fluke 105B and Fluke 99B only) Sinewave 1V pk-pk at 976 Hz with <-3% distortion Squarewave 5V pk-pk at 488 Hz, 976 Hz, or 1.95 kHz Component Tester Current or voltage ramp with 128 steps
General Specifications	The accuracy of all measurements are within ¡¾(1% of ready ¡¾ number of counts) from 18¡�C to 28¡�C. Add 0.1 x (specified accuracy) for each ¡�C<18¡�C or >28¡�C.
Display	Cold cathode fluorescent back-lit liquid crystal Size 84x84 mm (3.3x3.3 inch) Contrast and brightness User adjustable
Real-time clock	Stamps Min Max TrendPlots and 30k records with time and date.
Power	Line voltage adapter/battery charger included Installed battery Rechargeable NiCad Pack Operating time 4 hours typical Charging time 21 hours typical Alternate battery 4 Alkaline C cells (user supplied) (non rechargable)Environmental Temperature -- O¡�C to 50¡�C Shock and Vibration MIL-T-28800D for class 3 Drip and dust proof IP51 according to IEC529

For full Fluke 99B product specifications, please click here: Fluke 99B

Fluke 99B Series II ScopeMeter, 5GS/s 2 Channel 100MHz Oscilloscope

Includes Carrying Case & Accessories As Listed

Fluke 99B Scopemeter 99B-Scopemeter Handheld Oscilloscope Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# 43002-L/T*

• Fluke 99B 100MHz Series II ScopeMeter Oscilloscope (BC# 43002-L/T*)
• (2) 250 MHz Voltage Probe Sets
• (2) 1000V Hard Point Test Leads
• AC Adapter/Charger
• User Manual On CD-ROM
• Carrying Case (G)

Having trouble viewing this file? Click this link to download