Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image Cable Verifers /Scanners Small Arrow LAN Cable Verifiers Small Arrow Fluke Networks Small Arrow MicroScanner Series Small Arrow Microscanner
 



Share
 
  Click Here
To View Our Return Policy
 
Corner Image Corner Image
 

1H56 - Microtest MicroScanner 10/100 Cable Verifier

Fluke Microtest MICROSCANNER 10/100 Wire Map Cable Verifier

The Microscanner checks length, wiremap, continuity, opens, shorts and crossed and split pairs.

Includes MicroScanner Wiremap Adapter, Carrying Case & Accessories As Listed

Fluke Microtest MicroScanner Micro-Scanner Network Cable Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 25202




 
 
Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
 
Condition Refurbished
Warranty 90 Day Exchange
Included
  • Fluke Microtest MicroScanner 10/100 Cable Verifier (BC# 25202)
  • MicroScanner WireMap Adapter
  • Ethernet Cable
  • User manual On Cd-ROM
  • Carrying Case (G)
 
Corner Image Table Bottom Corner Image
Back
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image
Product Capabilities

"The essential all-in-one network tester"

The Microscanner TDR checks length, wiremap, continuity, opens, shorts and crossed and split pairs.It also generates multiple tones for use with a cable tracer. The optional office identifier kit is used when patch panel prots or wall jacks are unmarked.

The Microscanner Toner function allows to generate tones to locate hidden cables in walls, ceilings; or identify one in a bundle. An optional probe such as our Intellitone or equivalent is required to detect the tones.

Specifications:

Power Source
  • Battery: 9-Volt alkaline battery
  • Low battery: Low battery indication on display
Environmental
  • Operating Temperature: 0° to 50° C (32° to 122° F)
  • Storage Temperature: -10° to 55° C (14° to 131° F)
  • Humidity: 10 to 90% non-condensing User Interface
  • Display: Custom LCD, 1.75 x .85
  • Keypad: 4 button keypad
Applications
  • Shielded and Unshielded Twisted Pair cable
Test Interface
  • Main: Modular 8 connector for length, wire map, office identifier, toner
  • Loopback: Modular 8 connector used for patch cable wire map
Length
  • Measures length on all 4 pairs and displays in feet or meters Checks for opens, shorts and connections to a HUB (10BaseT / Token Ring)
  • Maximum length: 1500 ft. (457m)
  • Resolution: 1 ft.
Length Calibration
  • Modes:
    • User Selectable NVP
    • NVP Calculation based on known cable length:
      • Minimum length: 50 ft. (15 m)
      • Maximum length: 1500 ft. (457m)
Wiremap
  • Wiremap checks end-to-end continuity on all four wire pairs (Wiremap adapter required)
Faults detected:
  • Opens
  • Shorts
  • Reversed pairs
  • Swapped pairs
  • Split pairs
  • Distance Maximum length: 656 ft. (200 m)
Office Identifier
Identify cable links from the wiring closet to the office using the optional Office Identifier plugs
  • 12 passive test plugs attached to far end (identified as 1 through 12)
  • Requires minimum 12/36 or 36/45 pairs in cable
  • Distance Maximum length: 656 ft. (200 m)
Toner
Generate audible frequency tones detectable by standard tracer probes
  • Frequency: User may select 1 of 4 predefined tone sequences
  • Interface: Main Mod8 port for tone generation on all 4 pairs. Ground jack provided for grounding MICROSCANNER during trace operations.
High Voltage Input/Protection:
  • The test interface withstands input hazard conditions that arise from normal telephone interfaces (48 VDC at less than 80 mA) or 24 VAC power used to power many telephone keysets.

For full Microtest Microscanner product specifications, please click here: Microtest Microscanner
Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright 2003- AAATesters.com | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter