Fluke Networks 990DSL Copper Pro Loop Tester
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
In its basic configuration, CopperPro offers a broad range of Plain Old Telephone Services (POTS) troubleshooting, fault location and line qualification capabilities. Its Wideband/TDR option adds high frequency transmission testing and qualification functions for services like ADSL, HDSL, HDSL2, HDSL4, ISDN, T1, E1 and DDS. And the TDR feature of the option adds precise fault location and analysis. The Wideband/TDR option can be added at time of purchase or later at an authorized service center.
At a Glance
- Replaces up to sixteen traditional test sets
- Troubleshoots and qualifies lines for POTS, ADSL and other special services
- Time Domain Reflectometer (TDR) feature allows precision fault location
- Fast, accurate and easy to use
- Compact, rugged and weather resistant
General Specifications |
||||
Physical |
Size: 9.8"H x 5.3"W x 3.2"D (24.9cm x 13.5cm x 8.1cm) Weight: 4 lbs (1.81 kg) Display: 320 x 240 pixel graphic LCD with backlight and adjustable contrast LED Indicator: Charging status indicator (side connector panel) Communication Port: RS-232 PC/Printer port (DB-9) |
|||
Power |
AC Operation: External AC adapter/charger Battery Type (installed): Internal removable NiMH rechargeable battery pack Battery Life: A fully charged battery provides approximately 16 hours of normal use Battery Recharge Time (in tester): 2 to 3 hours for a fully discharged battery pack |
|||
Environmental |
Operating Temperature: -4° to 140° F (-20° to 60° C) Storage Temperature: -40° to 158° F (-40° to 70° C) Humidity Tolerance (operation without condensation): 95% Rain Resistance: IEC60529 IP02, International protection water dripping Vibration: Random, 2 g, 5 Hz to 500 Hz Shock: 1 Meter Drop Test Altitude: 4500 m (15,000 ft) |
|||
Regulator Compliance |
Safety: CSA C22.2 No.1010.1 CE: EN 61326 Emissions and Immunity CLASS A; EN 61010-1 2nd ammendment |
Basic CopperPro |
||||
AC Voltage |
0 to 250V (1% ± 0.5V accuracy) |
|||
DC Voltage (RIN=100 kohms or 10 Mohms) |
Range: 0 to 150V (1% ± 0.5V accuracy); 150 to 300V (2% accuracy) |
|||
DC Loop Current (430 ohms) |
0 to 100 mA (2% ± 0.3 mA accuracy) |
|||
Resistance (shorts & grounds) |
0 to 100 ohms (0.1% ± 0.10 ohm accuracy) 100 ohms to 1000 kohms (0.2% ± 0.10 ohm accuracy) 4 kohms to 999 Mohms (3% accuracy) |
|||
Leakage Stress |
2 kohms to 999 Mohms (3% accuracy) |
|||
Opens |
0 to 3000 ft (1% ± 5 ft accuracy) 3 to 50 kft (3% accuracy) 50 to 80 kft (5% accuracy) |
|||
Splits |
Range: 0 to 50 kft (Accuracy: 10% of Cable Length) |
|||
RFL (RTS = Res. to Strap) |
Fault Resistance (Rf): 0 to 30 Mohms Loop Resistance: 0 to 4000 ohms Resistance to Fault (@ Rf = 100 kohms): 0 to 100 ohms (0.1% RTS ± 0.10 ohm); 100 ohms to 4 kohm (0.3% RTS ± 0.10 ohm) |
|||
Load Coils |
0 to 6 (± 1 accuracy) |
|||
Tracing Tone |
Frequency: 577.5 Hz (0.1% accuracy) Range: > 15Vp-p (10% accuracy) |
|||
VF Noise |
Impedance: 600 ohms, Bridged (1% accuracy) Filters: C, CN, 3k, 15k, Psophometric Metallic Noise: 0 to 10 dBrn (± 2 dB accuracy); 10 to 100 dBrn (± 1 dB accuracy) Power Influence: 40 to 120 dBrn (± 2 dB accuracy) |
|||
VF Loss |
Signal Level: -40 to 10 dBm (± 0.5 dBm accuracy) Frequency: 100 Hz to 20 kHz (0.1% ± 2 Hz accuracy) |
|||
VF Longitudinal Balance (0 to 70 dB ± 2 dB) |
Disturbing Frequency: 200 to 2500 Hz (0.1% accuracy) Impedance: 600 ohms (1% accuracy) Filters: C, Psophometric |
|||
Send VF Tone |
Frequency: 100 Hz to 20 kHz (0.1% accuracy) Amplitude (settable) Range: -20 to 3 dBm Amplitude Accuracy: ± 0.5 dB (1 dB increments) Impedance: 600 ohms, 900 ohms (1% accuracy) |
CopperPro Wideband Option |
||||
WB Noise/Level |
Impedance Range: 100 ohms, 135 ohms, Bridged (1% accuracy) Filters: E, F, G, None Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Amplitude: -50 to 3 dBm (± 1 dB @ 135 ohms); -90 to -50 dBm (± 3 dB @ 135 ohms) |
|||
WB Loss |
Impedance: 135 ohms (1% accuracy) Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Magnitude: 0 to 50 dB (± 1 dB accuracy); 50 to 70 dB (± 2 dB accuracy) |
|||
WB Longitudinal Balance (0 to 70 dB; ± 2 dB) |
Disturbing Frequency: 10 to 1200 kHz (0.1% accuracy) Impedance: 100 ohms, 135 ohms (1% accuracy) Filters: E, F, G, None |
|||
Send WB Tone |
Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Amplitude (fixed): 0.0 dBm (± 0.5 dB accuracy) Impedance: 100 ohms, 135 ohms (1% accuracy) |
|||
WB Impulse Noise |
Impedance Range: 100 ohms, 135 ohms, Bridged (1% accuracy) Filters: E, F, G, None Test Time: 1 to 1440 Minutes (1% accuracy) Impulse Counter: 0 to 9999 Counter Threshold: -50 to 0 dBm (± 1 dB accuracy) |
|||
ADSL Auto-Test |
Impedance: 100 ohms Noise Filters: E, F, G, None ADSL Standard: ANSI, Full, G, Lite |
|||
Data Rate Prediction |
Resolution: 32 kb/s Downstream Rate Range: 0 to 8192 kb/s Downstream Rate Accuracy: ± 96 kb/s (3 units of resolution) Upstream Rate Range: 0 to 1024 kb/s Upstream Rate Accuracy: ± 64 kb/s (2 units of resolution) |
CopperPro TDR Option |
||||
Impedance |
135 ohms (1% accuracy) |
|||
Pulse-width |
20, 100, 500, 1000, 2500, 5000 ns (10% ± 5 ns accuracy) |
|||
Vop Selection |
0.300 to 0.999 |
|||
Range (Vop=0.64) |
30,000 ft (9144m) |
|||
Range Selection (Auto.) |
10 ft to 48 kft (3 to 14630m) |
|||
Horizontal Resolution |
0.5 to 156 ft (0.1524 to 47.5m) |
|||
Distance to Reflect. |
Range: 0 to 30,000 ft (0 to 9144m) Accuracy: 1% ± Vop Uncertainty |
|||
Vertical Gain |
Range: 80 dB Accuracy: 2 dB |
|||
Power Filter |
5 kHz Highpass |
|||
Averaging Filter |
4x Waveform Avg. |
|||
Input Protection |
± 400 V pk |
Includes:
- Fluke 990DSL CopperPro Loop Tester
- VDSLU Option
- Fluke 300v/200Ma Test Lead set
- Battery Pack
- AC Adapter/Charger
- RS-232 PC Interface Cable
- User Manual On CD-ROM
- Carrying Case w/ Strap
For full Fluke Networks 990dSL product specifications, please click here: Fluke Networks 990 dSL
Carrying Case w/ Strap & Accessories As Listed!
Fluke Networks 990DSL 990-DSL Copper Pro Loop Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.