Fluke Networks 990DSL Copper Pro Loop Tester
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Installed Options:
TDR - Time Domain Reflectometer for precise fault location
NSA - Deletes ADSL Capability
LWB - Enable wideband loss, but no other wideband functions
At a Glance
- Replaces up to sixteen traditional test sets
- Troubleshoots and qualifies lines for POTS, ADSL and other special services
- Time Domain Reflectometer (TDR) feature allows precision fault location
- Fast, accurate and easy to use
- Compact, rugged and weather resistant
CopperPro's basic configuration is designed for POTS applications including voltage, opens, shorts, balance, RFL, VF noise and loss, terminated and dial-up tests, as well as load coil detection and line monitoring.
You can identify, locate and repair line faults and qualify loop performance - all at the push of a button. And CopperPro can capture the test results for complete documentation.
CopperPro combines a toolbox approach with programmable Auto-Tests that make testing fast and easy. Results are displayed graphically on its large, bitmapped display that's easy for users to view in all light conditions. In addition, integrated tests combine functions to help the user understand what' causing the problem as well as pinpoint the location.
The result? Better and faster service. Higher productivity - and profitability.
As a standalone tool, CopperPro's handheld design makes it easy to carry and operate wherever testing takes you. CopperPro is easily automated for even greater testing speed and consistency - with documented test results.
Powerful Software enables sixteen test sets in one
You can identify and locate common physical cable faults like shorts, crosses, opens, splits, pair imbalances caused by bad splices and corroded metallic faults on unused pairs.
CopperPro also makes it easy to find the root causes of transmission problems, like excessive noise or signal loss, and helps locate and identify loop treatment devices like range extenders, network interface devices and maintenance termination units.
And, CopperPro makes fast work of qualification for both POTS like Caller ID, ANI and dial up modems, as well as digital broadband services like ADSL (DMT and CAP), T1, E1, DDS, ISDN, HDSL and HDSL2. That includes noise, loss and crosstalk measurements, predicted data rates, and location of impairments like load coils or bridge taps.
CopperPro offers the following sixteen test set capabilities:
1. Digital Multimeter (AC/DC Voltage, Resistance)
2. Opens Meter
3. RFL Meter
4. Noise Meter (VF and WB, Gaussian and Impulse)
5. Time Domain Reflectometer
6. Dial Set
7. Leakage Tester
8. Ammeter (DC)
9. Loss Meter (VF and WB)
10. VF and WB Precision Signal Generator
11. Tracing Tone Generator
12. ANI and CID Tester
13. ADSL Connectivity Tester ﾗ
14. ADSL and Special Services Pair Qualification Set
15. VF and WB Longitudinal Balance Meter
16. Power Harmonics Analyzer
Ease of Use - do more faster and with less training
Results are displayed graphically on its large, bitmapped display that's easy for you to view in all light conditions. In addition, integrated tests combine functions to help you understand what's causing the problem as well as pinpoint the location.
|
General Specifications |
||||
|
|
Display: 320 x 240 pixel graphic LCD with backlight and adjustable contrast LED Indicator: Charging status indicator (side connector panel) Communication Port: RS-232 PC/Printer port (DB-9) |
|||
|
|
Battery Type (installed): Internal removable NiMH rechargeable battery pack Battery Life: A fully charged battery provides approximately 16 hours of normal use Battery Recharge Time (in tester): 2 to 3 hours for a fully discharged battery pack |
|||
|
|
Storage Temperature: -40° to 158° F (-40° to 70° C) Humidity Tolerance (operation without condensation): 95% Rain Resistance: IEC60529 IP02, International protection water dripping Vibration: Random, 2 g, 5 Hz to 500 Hz Shock: 1 Meter Drop Test Altitude: 4500 m (15,000 ft) |
|||
|
|
CE: EN 61326 Emissions and Immunity CLASS A; EN 61010-1 2nd ammendment |
|||
|
Basic CopperPro |
||||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
100 ohms to 1000 kohms (0.2% ± 0.10 ohm accuracy) 4 kohms to 999 Mohms (3% accuracy) |
|||
|
|
|
|||
|
|
3 to 50 kft (3% accuracy) 50 to 80 kft (5% accuracy) |
|||
|
|
|
|||
|
|
Loop Resistance: 0 to 4000 ohms Resistance to Fault (@ Rf = 100 kohms): 0 to 100 ohms (0.1% RTS ± 0.10 ohm); 100 ohms to 4 kohm (0.3% RTS ± 0.10 ohm) |
|||
|
|
|
|||
|
|
Range: > 15Vp-p (10% accuracy) |
|||
|
|
Filters: C, CN, 3k, 15k, Psophometric Metallic Noise: 0 to 10 dBrn (± 2 dB accuracy); 10 to 100 dBrn (± 1 dB accuracy) Power Influence: 40 to 120 dBrn (± 2 dB accuracy) |
|||
|
|
Frequency: 100 Hz to 20 kHz (0.1% ± 2 Hz accuracy) |
|||
|
|
Impedance: 600 ohms (1% accuracy) Filters: C, Psophometric |
|||
|
|
Amplitude (settable) Range: -20 to 3 dBm Amplitude Accuracy: ± 0.5 dB (1 dB increments) Impedance: 600 ohms, 900 ohms (1% accuracy) |
|||
|
CopperPro TDR Option |
||||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
Accuracy: 1% ± Vop Uncertainty |
|||
|
|
Accuracy: 2 dB |
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
For full Fluke Networks 990 DSL product specifications, please click here: Fluke NEtowrks 990 DSL
Fluke Networks 990DSL CopperPro Loop Tester With LWB, NSA & TDR Options Installed
Installed Options:
TDR - Time Domain Reflectometer for precise fault location
NSA - Deletes ADSL Capability
LWB - Enable wideband loss, but no other wideband functions
Includes Carrying Case & Accessories As Listed
Fluke Networks 990DSL 990-DSL Copper Pro Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 16707
- Fluke 990DSL CopperPro Loop Tester (BC# 16707) w/ Options:
- LWB
- NSA
- TDR
- Test Leads Set
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Carrying Case