On Sale! Fluke Networks DSP-4000 FTA-440 MM Fiber Cable Analyzer Model DSP4000 FTA440 Fluke Networks 4000 440

Fluke Networks DSP-4000 Digital Cable Analyzer

Test, certify and document fiber and copper with DSP Series
Superior diagnostics make troubleshooting fast and easy
Universal Permanent Link Adapter delivers more passes and eliminates false failures
Powerful Fiber Test Adapters perform dual-fiber, dual-wavelength fiber certification
Easily manage and document copper and fiber links with new LinkWareﾙ Software
Product Capabilities

Certify Cat 5e/6 cabling systems with DSP-4000 CableAnalyzer Series

The DSP-4000 CableAnalyzer Series for several years has occupied the top level in the industry of cabling certification tools. The testers in this series provide accurate testing of Cat 5e and Cat 6 twisted-pair cabling as well as loss testing of fiber optic cabling.

The DSP-4000 Series is based on an exclusive digital signal processing test platform that provides a complete and accurate solution for certifying, documenting and troubleshooting twisted-pair copper cabling links from Cat 3 through Cat 6. Three sets of fiber optic test adapters can be combined with any of the DSP-4000 Series testers to provide automatic optical loss testing for horizontal or backbone fiber cabling. And like all Fluke Networks instruments, the DSP-4000 series products are built rugged to withstand drops and other mishaps that occur in today's network installation environments.

Product Capabilities
Fluke Networks' Fiber Test Kit measures power or power loss in optical fiber links used in premise wiring and LAN networks.

Manage Test Results

You can record and store any combination of copper or fiber optic Autotest reports with the Fluke DSP-4000 tester. Each test report can be assigned a unique, user-definable label, and can be downloaded to a PC or printed directly from the cable tester to a serial printer.

Test reports contain wavelength, measured loss, loss limit, test direction and reference level. The fiber test results may be saved in the tester's memory using a cable name of up to 18 characters long.

DSP FTA-440 Fiber Adapters

Accurately test MultiMode Gigabit Testing with the DSP-FTA440

Networks running Gigabit Ethernet over multimode fiber commonly use a new type of light source called a Vertical Cavity Surface Emitting Laser (VCSEL). VCSELs are more cost-effective than conventional lasers and it provide greater bandwidth than LED light sources.

The proper way to accurately test a fiber network using a VCSEL is with a tester that uses a VCSEL. Meet the DSP-FTA440 the world's first VCSEL-based Fiber Test Adapter.

Combining the DSP-FTA440 with a DSP-4000 DSP-4100 or DSP-4300 provides automatic, dual-fiber loss testing and certification by using a VCSEL laser at 850 nm and a Fabry-Perot (FP) laser at 1310 nm wavelengths. It also measures the length of fiber links and certifies the results against the Gigabit Ethernet standard.

In addition, the DSP-FTA440 allows bi-directional testing on both fibers under test and saves results for both directions in the same record. Utilizing Fluke Networks' comprehensive CableManager Software you can easily save all fiber link data electronically for results management and report generation.

Why do I need the DSP-FTA440 Gigabit Multimode Fiber Test Adapter if I already have an LED multimode tester?
- Networks running Gigabit Ethernet over multimode fiber, use a light source called a Vertical Cavity Surface Emitting Laser (VCSEL) for data transmission at 850 nm. More cost-effective than the traditional laser, a VCSEL provides greater bandwidth than possible with LED light sources.

With a VCSEL source, the light energy is concentrated in the center of the fiber, whereas an LED source fills the entire fiber with light energy. The farther the light energy is away from the center of the fiber, the more likely it is to escape the fiber and show up as power loss. Therefore, when LED testers are used to test gigabit multimode fibers, they tend to show more power loss than is actually present in a network using a VCSEL transmission source. With the very tight loss budgets for Gigabit Ethernet, you could actually get a FAIL reading with an LED test, when the link is really working. This could result in time wasted trying to fix a problem that doesn't exist.

When you test with the VCSEL-based DSP-FTA440, you can be sure that you will see the actual loss that is present in the network.

Can I test either 62.5 m m or 50.0 m m fiber with the Gigabit Multimode Fiber Test Adapter?
- Yes. The DSP-FTA440 Fiber Test adapter contains a 50.0 m m internal launch fiber, so it is perfect for testing 50.0 m m fiber. And it works just as well for 62.5 m m fiber because the light is being launched from a smaller fiber (50.0 m m) into a larger fiber (62.5 m m), capturing all of the light energy. This is true for both 850 nm and 1300 nm wavelengths.

Does it matter what core size or type of patch cord I use?
- Yes. The patch cord should always match the core size and type of the fiber under test. A mismatched patch cord may cause inaccurate loss measurements at the mismatched fiber-to-fiber interface.
Fast and easy testing. Automatic documentation

Testing and certifying all types of optical networks has never been easier with the DSP Series Cable Testers and our family of Fiber Test Adapters

Fluke Networks' DSP Fiber Test Adapters:

Test two fibers and two wavelengths at one time.
Utilize Fluke Networks' comprehensive CableManagerﾙ Software for results management and report generation.
Allow bi-directional testing on both fibers under test and save results for both directions in the same record.
Automatically measure length, propagation delay and loss.
Include a built-in TALK feature that allows you to communication with a person or the other end of the fiber.
Have a FindFiber feature that provides a quick check for users at both ends to locate a signal from the other end.
Keep track of the maximum and minimum power throughput of the test with the Monitor feature.
Efficiently and accurately test fiber links with any of the four major SFF connectors.
Are built rugged to withstand the drops and other mishaps that occur in today's network installation environments

DSP-FTA440 Specifications

General Specifications

Power supply: ±6 V supplied by the DSP-4000 test tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60 ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH, non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3ﾔ x 4.6ﾔ x 1.9ﾔ (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215 g)

Optical Transmitter

Connector: SC, multimode
Emitter type:
FTA420 - Multimode LED
FTA430 - Singlemode laser
FTA440 - 850 nm Vertical Cavity Surface Emitting Laser (VCSEL);
1310 nm FP laser
Wavelengths:
FTA420 - 850 nm and 1300 nm
FTA430 - 1310 nm and 1550 nm
FTA 440 - 850nm and 1310 nm
Power output:
FTA420 -20 dBm (10 mW), typical (into 62.5/125 mm fiber)
FTA430 and FTA440 -10 dBm
Power output stability (8 hours): ±0.25 dB at 23 °C

Optical Receiver

Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to 75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 and 1625 nm
Connector: SC, multimode or singlemode
Detector type: InGaAs
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1550 and 1625 nm.
Power measurement range: +3 dBm to -50 dBm
Power measurement linearity: ±0.25 dB at 23 °C
Length Measurement:
Measured in Loopback Mode
FTA420 - 5000 meters of 62.5 um multimode cable
FTA430 - 10000 meters of singlemode cable
FTA440 - 5000 meters of 50.0 um multimode cable
Length measurement accuracy: ±1.5 m plus 2 % of length

For full Fluke Networks DSP-4000 DSP-FTA440 product specifications, please click here: Fluke Networks DSP-4000 DSP-FTA440

Additional Information

Fluke Networks DSP-4000 CAT5 / CAT5e / CAT6 Digital Cable Analyzer with Fluke Networks DSP-FTA440 Gigabit Multimode 850nm / 1300nm Fiber Module Set

Includes Carrying Case And Accessories As Listed!

Fluke Networks DSP-4000 FTA-440 DSP4000 FTA440 MM Fiber Cable Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

DSP4000 DSP 4000 FTA440 FTA 440

Included