Fluke DSP-4000 DSP-FTA430 DSP-FTA410 kit with accessories

Fluke DSP-4000 Cable Analyzer w/ FTA430 FTA410

Fluke DSP-4300 DSP-FTA430 DSP-FTA410 kit with accessories

FLUKE DSP-4300 Cable Analyzer w/ DSP-FTA430 FTA410

FLUKE DSP-4300 DigitalCable Analyzer w/ DSP-FTA430

$2,995.00
Availability: In stock
SKU
1H199

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

It exceeds the Cat 5, Cat 5e, and Cat 6 specifications, achieving Level III accuracy. It also features automatic diagnosing of cable faults, and tells you exactly where the fault is in meters or feet. It is comparable in performance to most desktop models, with the added benefit of being handheld.

With its large on-board memory, you can store a full day's results inside, or detach the multimedia card and plug it into your PC. Featuring Fluke Corporation's LinkWare Cable Test Management software, you can easily review and analyze results for both fiber and copper. Software allows you to edit, view, print, and archive your data. You can then export the data to a PDF.

With the DSP-4300, you can monitor traffic through your Ethernet. Regardless on whether you're using 10BASE-T or 100BASE-TX, you can detect and measure impulse noise better than any other tester on the market. You can also identify hub port connections and tell what standard is met by the respective connections.

The DSP-4000 Series can boost your bottom line by providing fast, accurate testing of high-performance Cat 5e, Cat 6 and fiber optic cabling. Equipped with an exclusive digital platform, this series of testers ensures repeatable accuracy, no matter how many times you retest a link. With high-bandwidth test capabilities to 350 MHz, superior diagnostics and extensive reporting, the DSP-4000 Series provides you with a complete solution for testing, certifying and documenting copper and fiber. And like all Fluke Networks instruments, they're built rugged to withstand the drops and other mishaps that occur in today's network installation environments. The DSP-4300 is the most comprehensive cable testing and certification solution for high-speed copper and fiber networks available.

Product Capabilities:

  • Fluke Networks' Fiber Test Kit measures power or power loss in optical fiber links used in premise wiring and LAN networks.

Verify Fiber Optic Performance:

  • The DSP-FTK is compatible with the DSP-4000 Series of cable testers (DSP-4000 / 4100 / 4300).
  • Use the Fiber Optic Power Meter (DSP-FOM ) to measure optical power, in dBm or mW. You can also measure optical power loss (expressed in dB). The power loss measurement (or attenuation) compares the measured light energy at the end of the link (output) to the reference level at the input (the light source).
  • This loss measurement result delivers a true optical loss measurement for the link by subtracting the loss associated with the fiber optic patch cables. You can specify the Pass/Fail limit for loss and also the direction (A-B or B-A) of the measurement.

Manage Test Results:

  • You can record and store any combination of copper or fiber optic Autotest reports with the Fluke DSP-4000 tester. Each test report can be assigned a unique, user-definable label, and can be downloaded to a PC or printed directly from the cable tester to a serial printer.
  • Test reports contain wavelength, measured loss, loss limit, test direction and reference level. The fiber test results may be saved in the tester's memory using a cable name of up to 18 characters long.


DSP-FTA-430 Fiber Module

Fluke FTA-430 Fiber Modules, Fluke Networks keeps its eye on the future - so you don't have to. Powerful, High Definition Diagnostics
 

Complete solution for testing and certifying high-speed Fiber Networks
Fluke Networks offers the most complete line of Fiber Test Adapters for testing and certifying Single mode, Gigabit and Single-Mode fiber optic cabling systems. These Fiber Test Adapters are high-performance, high-productivity fiber test options for the DSP-4000, DSP-4100 and DSP-4300 Digital Cable Analyzers.

 

Features:

  • Test two fibers and two wavelengths simultaneously, automatically saving the test results.
  • Perform bi-directional testing on both fibers under test and save results for both in one record.
  • Utilize Fluke Networks' CableManager Software for comprehensive results management and report generation.
  • Automatically measure length and propagation delay along with loss.
  • Verify optical connectivity and determine which fibers go to which connectors at a patch panel.
  • Communicate with a person on the other end of the fiber.
  • Track the maximum and minimum power throughput of the test.
  • Withstand drops and other mishaps that occur on the job.

DSP-FTA430 Specifications


General Specifications


Power supply: ±6 V supplied by the DSP-4000 test tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60 ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH, non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3ヤ x 4.6ヤ x 1.9ヤ (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215 g)


Optical Transmitter

Connector: SC, multimode
Emitter type:
FTA420 - Multimode LED
FTA430 - Singlemode laser
FTA440 - 850 nm Vertical Cavity Surface Emitting Laser (VCSEL);
1310 nm FP laser
Wavelengths:
FTA420 - 850 nm and 1300 nm
FTA430 - 1310 nm and 1550 nm
FTA 440 - 850nm and 1310 nm
Power output:
FTA420 -20 dBm (10 mW), typical (into 62.5/125 mm fiber)
FTA430 and FTA440 -10 dBm
Power output stability (8 hours): ±0.25 dB at 23 °C


Optical Receiver

Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to 75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 and 1625 nm
Connector: SC, multimode or singlemode
Detector type: InGaAs
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1550 and 1625 nm.
Power measurement range: +3 dBm to -50 dBm
Power measurement linearity: ±0.25 dB at 23 °C
Length Measurement:
Measured in Loopback Mode
FTA420 - 5000 meters of 62.5 um multimode cable
FTA430 - 10000 meters of singlemode cable
FTA440 - 5000 meters of 50.0 um multimode cable
Length measurement accuracy: ±1.5 m plus 2 % of length




For full Fluke Networks DSP-4300 DSP-FTA430 product specifications, please click here: Fluke Networks DSP-4300 DSP-FTA430

Fluke Networks DSP-4300 CAT5 / CAT5e / CAT6 Digital Cable Analyzer with Fluke Networks DSP-FTA430 Singlemode 1310nm / 1550nm Fiber Module Set

Includes Carrying Case And Accesories As Listed

DSP4300 DSP 4300 FTA430 FTA 430 DSP430 DSPFTA430

Fluke Networks DSP-4300 FTA-430 SM LAN Cable Certifier DSP4300 FTA430  LAN Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

  • Fluke DSP-4300 Cable Analyzer
  • Fluke DSP-4300SR Smart Remote
  • Fluke DSP-4000 Series Calibration Module  
  • Fluke (2) Basic Link Adapters Cat5/5e
  • Fluke (2) Channel Adapters Cat5/5e/6
  • Fluke DSP-FTA-430 SM Fiber Adapters Set
  • 128 MB Media Card
  • (2) SM SC-SC Fiber Cables
  • Linkware Software
  • (2) Straps For Units
  • (2) Talkset Headsets
  • (2) Battery Packs
  • (2) AC Adapter/Chargers
  • RS232 PC Interface Cable
  • Carrying Case (G)
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!