Fluke DSP-FTA430 DSP-FTA410 SM MM Fiber Modules
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Fluke FTA-430 Fiber Modules
Fluke FTA-430 Fiber Modules, Fluke Networks keeps its eye on the future - so you don't have to. Powerful, High Definition Diagnostics
Complete solution for testing and certifying high-speed Fiber Networks
Fluke Networks offers the most complete line of Fiber Test Adapters for testing and certifying Single mode, Gigabit and Single-Mode fiber optic cabling systems. These Fiber Test Adapters are high-performance, high-productivity fiber test options for the DSP-4000, DSP-4100 and DSP-4300 Digital Cable Analyzers.
Features:
- Test two fibers and two wavelengths simultaneously, automatically saving the test results.
- Perform bi-directional testing on both fibers under test and save results for both in one record.
- Utilize Fluke Networks' CableManager Software for comprehensive results management and report generation.
- Automatically measure length and propagation delay along with loss.
- Verify optical connectivity and determine which fibers go to which connectors at a patch panel.
- Communicate with a person on the other end of the fiber.
- Track the maximum and minimum power throughput of the test.
- Withstand drops and other mishaps that occur on the job.
DSP-FTA430 |
SingleMode Fiber Test Adapter Uses LED light sources at 1310 nm and 1550 nm wavelenghts
|
Fluke FTA-410 Fiber Modules
The DSP-FTA410 Fiber Test Adapter lets you use a DSP-4000 CableAnalyzer test tool to test and certify fiber optic cable installations. The fiber test adapter includes the following features: Autotest function measures optical power loss (at 850 nm and 1300 nm) and length on dual-fiber multimode links.
DSP-FTA410 Specifications
General Specifications
Power supply: ±6 V supplied by the DSP-4000 test tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60 ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH, non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3ヤ x 4.6ヤ x 1.9ヤ (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215 g)
Optical Transmitter
Connector: SC, multimode
Emitter type: LED
Wavelengths: 850 nm and 1300 nm
Power output at 850 nm and 1300 nm: -20 dBm (10 mW), typical
(into 62.5/125 mm fiber)
Power output stability (8 hours) at 850 nm and 1300 nm: ±0.25 dB at 23 °C
Optical Receiver
Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to 75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 nm
Connector: SC, multimode or singlemode
Detector type: Germanium
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, and 1550 nm
Measurement range: 0 dBm to -40 dBm
Power measurement linearity: ±0.25 dB at 23 °C
Length measurement accuracy: ±1.5 m plus 2 % of length
Fluke Networks DSP-FTA430 SingleMode 1310nm / 1550nm Fiber Module Set & DSP-FTA410s Multimode 850nm / 1300nm Fiber Module Set
For Fluke Networks DSP 4000, 4100 & 4300 Digital Cable Analyzer
This Sale Is For Modules Only. Cable Tester Not Included.
Includes Accessories As Listed!
Fluke Networks DSP-FTA430 DSP-FTA410 DSPFTA430 DSPFTA410 SM MM Fiber Module Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
DSP-4000 DSP-4100 DSP-4300
- (2) Fluke DSP-FTA430 Singlemode Fiber Adapters
- 1310nm
- 1550nm
- (2) Fluke DSP-FTA410 Multimode Fiber Adapters
- 850nm
- 1300nm
- Fiber Patch Cables
- (2) SM SC-SC Duplex
- (2) MM SC-SC Duplex
- (2) SC-SC Duplex Fiber Connectors
- User Manual on CD-ROM