Fluke Networks Fiber OneShot PRO
Fiber OneShot™ PRO is your first response, singlemode fiber troubleshooter that locates severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber—up to 15 miles of fiber (more than 23,000 metres) diagnosed in less than five seconds.
Most troubleshooting solutions for today’s fiber network are inefficient and take too much time. Simple tools like lasers (VFLs) are easy to operate but extremely repetitive and tiresome; most VFLs have distance limitations of 2 or 3 miles (3,218 or 4,828 metres). At the high end, Optical Time Domain Reflectors (OTDRs) can work as troubleshooters but their advanced analysis and trace capabilities are better suited for certifying and documenting cable installation quality. What field technicians really need is a first-line diagnostic tool that locates fiber cabling problems accurately, the first time. Fiber OneShot PRO’s simple, one-button test feature, its speed and its distance capability make it your perfect frontline fiber troubleshooter.
When and Where to Use Fiber OneShot PRO
Fiber OneShot PRO provides immediate and in-depth visibility into a carrier network’s singlemode fiber cabling:
video service to fiber customers down? Need to diagnose fiber troubles with inexperienced technicians or technicians who don’t normally work with fiber? Fiber no-light situations? Degraded network performance on longer fiber runs? Fiber OneShot PRO helps you locate the source of the problem or eliminate cabling as the culprit. No need to blindly waste time manipulating lasers or flashlights and walking between central offices, hubs and customer premises.
Locating breaks or potentially weak network cabling areas
severe bends, high-loss splices and dirty connectors can diminish fiber network performance or cause network failure. Fiber OneShot PRO locates high-loss incidents based on default or user-defined settings, so you can deliver high network performance to your customers.
Locating potential sources of bit error rates
reflectance caused by end-face contamination or poor connections leads to bit errors. Fiber OneShot PRO locates these problem areas quickly and easily.
Analyzing the channel
quickly confirm connectivity by verifying all the links and connections in your channel.
Fiber OneShot PRO is perfect for large service provider networks, MSOs, metropolitan areas, rural areas, regional carriers and campus environments up to 75,459 feet (23,000 metres).
Compatible with all PON wavelengths
Fiber OneShot PRO can troubleshoot fibers using any standard PON wavelength: 1310 nm, 1490 nm, 1550 nm and 1625 nm.
17.5 cm H, 7.8 cm W, 3.8 cm D, .35 kg weight including batteries
95% (10ºC to 35ºC)
75% (35ºC to 40ºC)
uncontrolled < 10ºC
Random, 5 Hz to 500 Hz, MIL-PRF-28800F CLASS 2
1-meter drop test
9,842 feet/3,000 metres
2 AA alkaline batteries (no battery charger)
More than 1,500 tests (typical)
Class 1 CDRH Complies to EN 60825-2
Backlit black and white (segments)
Index of refraction range
1.45 to 1.5 (factory default is 1.468)
Automatically turns off after 5 minutes if no keys are pressed. Backlight turns off first.
Factory calibration interval
1550 nm ± 20 nm at 25°C
Class 1 CDRH Complies to EN 60825-2
75,459 feet or 23,000 metres
Maximum number of incidents shown
± (1 m + 0.1% x length) for reflective incidents *1*
± (3 m + 0.1% x length) for non-reflective incidents *2*
5 seconds typical testing time
Removable/cleanable SC adapter, UPC polish
Fiber types tested
9/125 µm singlemode
Detection of reflective incidents *3*
-45 dB default threshold (user-selectable: -24 dB to -62 dB in 1 dB increments)
Maximum reflectance measurement
Loss Threshold Setting
1.5 dB default warning threshold (user-configurable from 0.5 dB to 6.1 dB in 0.1 dB increments)
If no fiber is attached or if the connector is dirty, the troubleshooter displays 0 m or 0 ft.
Live fiber detection
Detects optical signals from 1250 nm to 1625 nm and shows ACTIVE LINE if a signal is there. Looks for a signal every 3 seconds after the first detection. +7 dB maximum input power.
*1.* ± user-configurable Index of Refraction (IOR) error ± the incident location error
*2.* ± user-configurable Index of Refraction (IOR) error ± the incident location error
*3.* Detects the location of an incident that has a reflectance larger than -62 dB. Detects incidents >2 m after the bulkhead connector when the bulkhead reflectance is <35 dB. Detects incidents >3 m after an incident when the incident reflectance is <35 dB.