Fluke Networks LinkRunner LRAT-1000 AT-1000 Network Auto Tester AT1000 LRAT1000

Fluke Networks LinkRunner AT 1000
LinkRunner AT provides the answers you need to quickly troubleshoot connectivity problems:

• Where does this cable or jack go?
• How is this switch port provisioned?
• Can I negotiate a Gigabit link?
• Are there 802.1x security conflicts?
• Are the DHCP and DNS servers working?
• Can I get enough power from this port?
• Can I connect to servers and the Internet with IPv4?
• Can I connect over copper links?
• Is this patch cable good?

In seconds, the LinkRunner AutoTest provides these answers and more on a brightly colored display that's easy to read under desks or outdoors. You can document your test results with two quick keystrokes to prove the job's done right. With a six hour battery life and rugged design, LinkRunner can work wherever and whenever you need it.

Features:

• Instant-on operation
  • ready to run your first test in less than three seconds.
• Get answers fast
  • user-defined AutoTest performs your required set of connectivity tests in seconds, enabling you to accurately and quickly identify and solve network problems.
• Verify connection at 10/100/1G over copper
  • connect using copper, turn it on to see link status, connection type, signal strength and traffic.
• Nearest switch and VLAN information
  • uses IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco® and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot and port
• 802.1x authentication
  • verify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner Manager software configures 802.1x EAP type, downloads certificates and enters passwords.
• Cable verification and toning
  • check patch cables using the built-in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, opens or split pairs. The optional office locator kit allows identification of up to six unique ports for documenting cable plants.
• IPv4 ready
  • supports IPv4
• Key device and application availability
  • instead of a ping, which is often blocked or disabled, LinkRunner performs a TCP port open test to verify application connectivity using IPv4 and IPv6. Router, DNS and DHCP servers are reported
• Document results
  • store up to 50 complete test results and download to your PC with the push of a button.
• Designed for field use
  • six-hour Li-ion battery life, one-handed operation and a rugged design.
• Easy upgrades
  • the mini-USB port allows software upgrades in the field in minutes.
     

Functions:

Graphical Cable Wiremap and Cable Details
Finds opens, shorts, mis-wires and split pairs on non-terminated cable with a WireView Cable Identifier and built-in wiremap port.

Cable Tests
Locate cable runs with toning, port advertisement, link blinking and wiremapping with up to six cable identifiers. Toning supports both analog and digital IntelliToneâ?¢ modes

Switch Information
LinkRunner AT displays critical nearest switch information including:

• Switch name and model
• IP address
• Port, slot and VLAN
• Duplex and speed (actual and advertised)
• Signal strength
• Connection MDI or MDI/X
• PoE voltage and power (actual and test limits)
• Graphical representation of power on pairs

AutoTest
Verify enterprise connectivity in seconds with AutoTest. Standardize your set of critical network tests in profiles to run every time. Tests include:

• PoE (copper only) class
• Link speed and duplex (actual and advertised)
• RX pair and polarity
• 802.1x authentication
• Switch name, port, VLAN, model and IP
• DHCP auto-negotiation with subnet and DHCP server addresses
• IPv4 availability
• Ping and TCP port connectivity with lost and min, max and average speed

Ping and TCP Port Connectivity
Verify connectivity to key devices with ping and TCP connectivity testing. Devices automatically include a router, DNS server and DHCP server. Configure 10 additional devices to meet your requirements by URL or IPv4 address and optional application port number.

Specifications:

For full Fluke Networks LinkRunner AT-1000 product specifications, please click here: Fluke Networks LinkRunner AT-1000
 

Fluke Networks LinkRunner AT 1000 Network Auto Tester

Verify connection at 10/100/1G over copper

Includes Carrying Case & Accessories As Listed

LRAT 1000 LRAT1000 LRAT-1000

Fluke Networks LRAT-1000 LRAT1000 LinkRunner Network Auto Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 38950-L/T*

• Fluke Networks LinkRunner AT-1000 Network Tester (BC# 38950-L/T*)
• (2) Ethernet Cables
• USB PC Interface Cable
• User Manual On CD-ROM
• Carrying Case (G)

Having trouble viewing this file? Click this link to download