Ericsson FSU 995 PM kit with accessories

Ericsson FSU 995 PM SM MM Fiber Fusion Splicer Polarization Maintaining

GN NetTest CMA4000 CMA4453M kit with accessories

GN Nettest CMA4000 CMA4453M Long Haul Fiber OTDR

Fluke LRAT2-CIQ-GSV CableIQ Gigabit Service Kit

$3,295.00
Availability: In stock
SKU
6H50

Condition: Refurbished

Warranty: 1 YEAR WARRANTY

 >CableIQ Qualification Tester

>At a Glance

  • >Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
  • >Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
  • >Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
  • >Identifies unused switch ports that can be reallocated
  • >Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
  • >Tests all copper cabling media: twisted-pair, coax, and audio cabling

>Product Capabilities

>The network tech's vision into cabling bandwidth >
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

>Reduce escalated problems by as much as 30%
CableIQ's powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

>Specifications

>Cable types supported

>UTP, STP, FTP, SSTP, RG6, RG59, audio and security

>Qualification autotests

>1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax

>Supported tests

>Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.

>Wiremap

>Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.

>Find fault

>Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application

>Results storage

>Up to 250 qualification test results

>Power

>Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries

>Battery life

>20 hours of typical use, without backlight

>Other battery types supported

>4AA photo lithium, NIHM, NICAD

>Dimensions and weight

>7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)

>
 

Fluke Networks Linkerunner AT 2000 Network Auto Tester
 

LinkRunner AT Provides the answers you need to quickly troubleshoot connectivity problems:

  • Where does this cable or jack go?
  • How is this switch port provisioned?
  • Can I negotiate a Gigabit link?
  • Are there 802.1x security conflicts?
  • Are the DHCP and DNS servers working?
  • Can I get enough power from this port?
  • Can I connect to servers and the Internet with IPv4 and IPv6?
  • Can I connect over copper or fiber links?
  • Is this patch cable good?


In seconds, the LinkRunner AutoTest provides these answers and more on a brightly colored display that's easy to read under desks or outdoors. You can document your test results with two quick keystrokes to prove the job's done right. With a six hour battery life and rugged design, LinkRunner can work wherever and whenever you need it.

Linkrunner AT Features:

  • Instant-on Operation
  • Ready to run your first test in less than three seconds
  • Get answers fast 
  • User-defined AutoTest performs your required set of connectivity tests in seconds, enabling you to accurately and quickly identify and solve network problems
  • Verify connection at 10/100/1G over copper or 100/1G over fiber 
  • Connect using copper or fiber, turn it on to see link status, connection type, signal stength and traffic.
  • Nearest switch and VLAN information 
  • Uses IEEE Link Layer Discovery Prtocol (LLDP) Plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot and port.
  • TruePower PoE Testing 
  • Quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery before installing cameras, AP's and phones ensures smooth deployment.
  • 802.1x Authentication
  • Verify access to secure networks using 802.1x and MAC access Control Lists (ACL).
  • Cable verification and toning 
  • Check patch cables using the built-in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, opens or split pairs.
  • IPv4/IPv6 Ready 
  • Supports both IPv4 and IPv6
  • Key device and application availability 
  • Instead of a ping, which is often blocked or disabled, LinkRunner performs a TCP Port open test to verify application connectivity using IPv4 and IPv6. Router, DNS and DHCP Servers are reported.
  • Document results 
  • Store up to 50 complete test results and download to your PC with the push of a button.
  • Designed for field use 
  • Six-hour Li-ion battery life, one-handed operation and a rugged design.
  • Easy Upgrades 
  • The mini-USB Port allows software upgrades in the field in minutes.


Functions:

Graphical Cable Wiremap and Cable Details
Finds opens, shorts, mis-wires and split pairs on non-terminated cable with a WireView Cable Identifier and built-in wiremap port.

Cable Tests
Locate cable runs with toning, port advertisement, link blinking and wiremapping with up to six cable identifiers. Toning supports both analog and digital IntelliToneル modes.

Switch Information
LinkRunner AT displays critical nearest switch information including:

  • Switch name and model
  • IP address
  • Port, slot and VLAN
  • Duplex and speed (actual and advertised)
  • Signal strength
  • Connection MDI or MID/X
  • PoE voltage and power (actual and test limits)
  • Graphical representation of power on pairs

TruePower PoE Loading
Verify you are receiving the required curent and voltage up to 25.5W to power your PoE enabled devices. The LinkRunner TruePower PoE loading draws actual power to verify that your PoE enable devices will have the required power to function.

AutoTest
Verify Enterprise connectivity in seconds with AutoTest. Standardize your set of critical netowrk tests in profiles to run every time. Tests include:

  • PoE (Copper Only) Class
  • Link speed and duplex (actual and advertised)
  • RX pair and polarity
  • 802.1x authentication
  • Switch name, port, VLAN, model and IP
  • DHCP Auto-negotiation with subnet and DHCP server addresses
  • IPv4 and IPv6 availability
  • Ping and TCP port connectivity with lost and min, max and average speed

Ping and TCP Port Connectivity
Verify connectivity to key devices with ping and TCP connectivity testing. Devices automatically include a router, DNS server and DHCP server. Configure 10 additional devices to meet your requirements by URL or IPv4/IPv6 address and optional application port number.

Reflector
The LinkRunner packet reflector mode allows it to be used as a remote device during throughput tests to validate LAN and WAN throughput capabilities. LinkRunner AT supports packet reflection for:

  • OptiView XG Network Analysis Tablet
  • OneTouch AT Network Assistant
  • EtherScope Network Assistant
  • MetroScope Service Provider Assitant

Linkrunner AT 2000
AutoTest X
10/100/1G Copper X
Color Display X
Key Devices & TCP Connectivity X
Verify 802.1x Settings X
Identify Switch Ports and VLANs X
PoE Voltages X
IPv4 Support    X
Graphical, Color Wiremap and Cable Details X
6-hour Battery Life (Li-Ion Battery) X
WireView Cable Identifier #1 X
Reports X
100/1G Fiber X
IPv6 Support X
TruePower PoE Loading X
Reflector Option    X

Specifications:
Environmental
Operating Temperature and Relative Humidity 32ºF to 113ºF (0ºC to +45ºC)
Note: The Li-ion battery will not charge if the internal temperature of the tester is above 113ºF (45ºC)
Operating Relative Humidity (% RH without condensation) 90% (50ºF to 95ºF; 10ºC to 35ºC)
75% (95ºF to 113ºF; 35ºC to 45ºC)
Storage Temperature -4ºF to 140ºF (-20ºC to +60ºC)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop
Safety EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007
Altitude 4,000 m; Storage: 12,000 m
EMC FCC Part 15 Class A, EN 61326-1
Certifications and Compliance Conforms to relevant European Union directives
Conforms to relevant Australian standards
Listed by the Canadian Standards Association
General
Media Access; Copper RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at)
Media Access; Fiber    SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/SX/ZX (LRAT-2000 Only)
Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through and cable ID
Tone Generator IntelliTone digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Dimensions 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Weight 18 oz (0.5 kg)
Li-ion Battery Removable, rechargeable li-ion battery pack (18.5 Watt-hrs). Typical operating life is 6 hours; Typical charge time is 3 hours
AA Battery Removable AA battery pack. Typical operating life is 3 hours
External AC Adapter/Charger AC input 90 to 264 Vac 48 to 62 Hz input power DC output 15 Vdc at 2 amps (li-ion battery pack only)
Display 2.8 in color LCD (320 x 240 pixels)
Keypad 12-key elastomeric
LEDs 2 LEDs (Link and Receive/Transmit indicators)
Host Interface USB 5-pin mini-B

>IntelliTone Pro 200 Probe

>Main Features

  • >IntelliTone 200 Probe locates and isolates hidden or bundled voice >data and video cables quickly and reliably >even on active networks

>Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles >The IntelliToneル Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means itメs equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliToneル Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliToneル Probe's signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes' work.

IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.


For full Fluke Networks LRAT2-CIQ-GSV product specifications, please click here: Fluke Networks LRAT2-CIQ-GSV

Fluke Networks LRAT2-CIQ-GSV Gigabit Service Kit
 CableIQ Qualification Tester w/
 LinkRunner AT2000 Network Multimeter &
Intellitone Pro 200 Probe

Copper qualification tester troubleshoots and qualifies cabling speed (10/100/1000/VoIP)

Verify connection at 10/100/1G over copper or 100/1G over fiber

Includes WireView WireMapper, Cable IQ Remotes #2-7, Carrying Case & Accessories As Listed

LRAT2 CIQ GSV LRAT2CIQGSV CIQ-100 AT 2000

Fluke Networks LRAT2-CIQ-GSV LRAT2CIQGSV CableIQ Gigabit Service Test Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 23409-L/T* 23410-L/T* 22730-L/T*

  • Fluke Networks CableIQ Qualification Tester (BC# 23409-L/T*)
  • Fluke Networks LinkRunner AT2000 (BC# 22730-L/T*)
  • Fluke Networks Intellitone Pro 200 Probe w/ Strap (BC# 23410-L/T*)
  • Fluke Networks Remote ID's # 2-7
  • Fluke Networks WireView WireMapper 1
  • (2) RJ45/11 Universal Adapters
  • (2) Ethernet Cables P/N: 256-8884
  • Coax Cable
  • CableIQ Getting Started Guide
  • Intellitone Pro Quick Reference Guide & CD-ROM
  • CableIQ Version 2.0 Software
  • LinkRunner AT2000 CD-ROM
  • RJ11 Patch Cable
  • RJ45 Patch Cable
  • GLC-SX-MM / 30-1301-02 Transceiver
  • Accessory Case
  • LinkRunner AT2000 Start-Up Guide
  • (2) Safety Information Guides:
    • Network Test Equipment
    • Cable Testers
  • AC Adapter/Charger
  • Power Cord
  • (2) USB PC Interface Cables
  • Case For LinkRunner w/ Strap
  • Carrying Case w/ Strap
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!