Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image Cable Verifers /Scanners Small Arrow LAN Cable Verifiers Small Arrow Fluke Networks Small Arrow MicroMapper

  Click Here
To View Our Return Policy
Corner Image Corner Image

1H201 - Fluke Networks MicroMapper LAN Wiremap Checker

Fluke Networks MicroMapper WireMap Checker

MicroMapper is a cable tester that enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables.

Includes Carrying Case & Accessories As Listed 

Fluke Networks MicroMapper Micro-Mapper LAN WireMap Checker Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 34001

Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
Condition Refurbished
  • Fluke Networks MicroMapper Wiremap Checker (BC# 34001)
  • Fluke Networks Remote
  • (2) Ethernet Cables
  • User Manual On Cd-ROM
  • Carrying Case
Corner Image Table Bottom Corner Image
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image
 Fluke Networks Wiremapper
The MICROMAPPER is a hand-held cable tester that enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables. In one step, the MICROMAPPER will test twisted pair cabling for opens, shorts, reversed, crossed, and split pairs. Simply slide the switch to the Cable position, press the (TEST) button and the MICROMAPPER will automatically scan for any existing faults in your cable. The specially designed remote unit is provided for one-person testing of installed cabling. The tone generator function can be used with the MicroProbe cable tracer to trace cables and locate cables hidden in ceilings, walls, floors, and bundles.

  • Tests for wiring faults and detects opens, shorts, crossed, reversed, and split pairs. (Split pair fault detection requires a minimum cable length of 15.75" (40cm))
  • Verifies shield integrity
  • MICROMAPPER’s Remote Identifier enables one person to test installed cabling
  • Easy to read fault display and high speed testing
  • Generation of two tones for tracing cables and locating hidden cables
  • Debug-mode for detailed fault identification results
  • Auto-sleep mode to decrease power consumption

MICROMAPPER main unit: RJ45 jack
Remote Identifier: RJ 45 jack
Pairs tested 1-2, 3-6, 4-5, 7-8, and shield
LED Display
Horizontal: 5 green LEDs for pairs and shield display
(1 - 2, 3 - 6, 4 - 5, 7 - 8, and SHIELD)
Vertical: 6 red LEDs
Cables test limit
Minimum: 15.75" (40cm); Maximum: 656’ (200 m)
MICROMAPPER: requires four 1.5 AAA batteries. IEC :
LR03; Others : AAA, E92, 4003; JIS : AM 4 ; ANSI : 24A; 1.5 Volt (nominal)
Remote Identifier: No battery required
MICROMAPPER: 4.92" x 2.05" x 1.54" 1
125 mm x 52 mm x 39 mm
MICROMAPPER with Remote Identifier: 125 g

For full Fluke Networks MicroMapper product specifications, please click here: Fluke Networks MicroMapper

Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright © 2003- | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter