Fluke OptiView OPV-PRO MM Fiber Network Analyzer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Fluke OptiView Intergrated Network Analyzer PRO
Model: OPV-PRO
Features: Complete network vision in seconds Combines seven layer protocol analysis, active discovery, SNMP device analysis, RMON2 traffic analysis and physical layer testing into a mobile solution Design and user interface equally effective whether the unit is carried as a portable device or placed semi-permanently on a network link Web enabled remote analysis allows up to seven users to access a single unit simultaneously.
The Analyzer is designed for troubleshooting and monitoring Local Area Networks (LANs). The analyzer tests all seven OSI layers. It tests from the cable to the application layer and everything in between, so problems have nowhere to hide.
What could be more powerful than all of your network test tools put together?
Meet the OptiView Integrated Network Analyzer. It combines all the network monitoring and troubleshooting capabilities you need in one power-packed handheld tool. Including a high-performance protocol analyzer. A fast cable tester. RMON2 probe. Making this the only portable test tool you need.
And OptiView's "whole" is smarter and easier to use than the sum of its parts-giving you new levels of facility, functionality and feature richness that an armful of standalone tools can't deliver. With the OptiView analyzer, it's simply faster and easier to get a comprehensive view of your network and isolate any problems.
- Complete network vision in seconds
- Combines seven layer protocol analysis, active discovery, SNMP device analysis, RMON2 traffic analysis and physical layer testing into a mobile solution
- Design and user interface equally effective whether the unit is carried as a portable device or placed semi-permanently on a network link
- Web enabled remote analysis allows up to seven users to access a single unit simultaneously
- Address-to-name mapping
- Direct connection to 100BASE-FX (Pro Models)
- Packet capture and decode (Pro Model)
- SNMP device analysis
- RMON II traffic analysis (Pro Model)
- Gigabit testing capabilities (Pro Gigabit Model)
- Cable testing (Copper & Fiber)
- Active discovery in switched networks
- Seven-layer analysis
- Fully automatic IP configuration-even without DHCP
Now one tool is all it takes to analyze your entire network. The OptiView analyzer combines a high-performance protocol analyzer and cable tester together with the advanced features to keep you on top of your network.
In a single handheld unit, OptiView integrates:
Advanced Discovery
As soon as it's connected to the network, the Optiview analyzer starts its discovery process. This process included real time results of devices, networks and problems.
Device Discovery
Devices are discovered by monitoring traffic and by actively querying hosts. Once discovered, the analyzer will present the most thorough information possible in terms of:
- DNS Name
- NetBIOS Name
- SNMP Name
- IPX Name
- Addresses
Network Discovery
The OptiView analyzer screen will display your network as network type. Networks and all associated devices are discovered by traffic monitoring and actively querying the hosts.
Problem Discovery
The OptiView analyzer Problem Discovery Screen displays all network hosts that may be experiencing problems. Problems are reported according to severity - error, warning or informational. Resolved problems are also displayed.
SNMP Device Analysis
The Overview Screen displays critical information about a selected device. The device detail can include:
- Names
- Addresses
- Protocols
- NetBIOS
- Services
- Router
- Printer
- Remote monitoring capabilities
Cable Test
When connected to a copper media network, the OptiView analyzer will automatically perform a cable test and provide you with the cable length to the attached device even into a live switch or hub port.
Select the Twisted-Pair Detail Screen and see:
- Cable Wire Pair
- Impedance
- Length to End
- Length to Reflection
- Status
- Anomalies (shorts, opens and split pairs)
- Receive Pair
- Transmit Pair
- Receive Voltage
- Polarity
Packet Capture, Filter and Decode
Even at gigabit speeds, the OptiView analyzer is capable of full line-rate packet capture and decode.
Packet Capture
For more selective packet captures, use the context sensitive filter and the packet capture engine is automatically populated with the source and/or source and destination addresses of your selection.
Packet Decode
As you have come to expect from a traditional protocol analyzer, the OptiView analyzers'allows you to set the capture buffer size, slice size, buffer configuration and various other parameters.
Power Meter Specifications
| Output: | 1 mV per 1 dB |
| Input Connector Type: | Fixed ST |
| Photodetector Type: | Germanium |
| Application Range: | 800 to 1600 nm |
| Calibrated wavelengths: | 850, 1300, and 1550 nm |
| Acceptable fiber types (sizes): | 9/125 to 100/140 µm |
| Operating range: | +3 to -50 dBm |
| Maximum power level: | +5 dBm |
| Absolute accuracy: | ±0.25 dB, (Specified at 25°C & -10.0 dBm per NIST standard) |
| Relative accuracy: | ±0.15 dB, (Specified over any 10 dB within measurement range) |
| Repeatability: | ±0.04 dB |
| Battery type: | 9V alkaline, NEDA 1604A or IEC 6LR61 |
| Battery life: | 16 hours minimum, 100 hours typical, 9V alkaline |
| Low battery indication: | Blinking LED indicator |
| Operating temperature: | 0 to +40°C |
| Storage temperature: | -20 to +70°C |
| Humidity: | 0 to 40°C, up to 75% RH |
| Electromagnetic Compatibility: RF Field =1 V/m RF Field = 3 V/m |
Total Accuracy = Specified Accuracy Specified Accuracy + 2.5 dB |
Source (850, 1300, 850/1300) Specifications
| Type: | Infrared LED |
| Wavelength: | 850 ± 30 nm 1300 ± -40/+50 nm 850/1300 ± 30 nm, -40/+50 nm |
| Output power: | -20 dBm, nominal into 62.5/125 micron multimode fiber |
| Output connector type: | Fixed ST |
| Beam divergence: | 0.3 radians |
| Pulse duration: | Continuous wave |
| Maximum output: | 200 µW (radiated into free space) |
| Stability: | ±0.2 dB per 8 hours at 20°C after 20 minute warmup |
| Temperature coefficient: | -0.08 dB per °C, < 18°C or > 28°C |
| Battery type: | 9V alkaline, NEDA 1604A or IEC 6LR61 |
| Battery life: | 16 hours minimum, 24 hours typical, 9V alkaline |
| Low battery indication: | Blinking LED indicator |
| Operating temperature: | 0 to +40°C |
| Storage temperature: | -20 to +70°C |
| Humidity: | 0 to 40°C, up to 75% RH |
For full Fluke Networks Optiview product specifications, please click here: Fluke Networks Optiview
Fluke Networks OPTIVIEW PRO OPV-PRO Network Analyzer
Power Meter
- 850nm
- 1300nm
- 1550nm
Source
- 850nm
- 1300nm
Includes Carrying Case & Accessories As Listed
OPVPRO OPV PRO
Fluke Networks OptiView OPV-PRO OptiView OPVPRO MM Fiber Network Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 05415
- Fluke Networks Optiview OPV-PRO Pro Network Analyzer (BC# 05415)
- Fluke DSP-FOM Fiber Optic Meter
- 850nm
- 1300nm
- 1550nm
- Fluke FOS Fiber Optic Source
- 850nm
- 1300nm
- (2) MM ST-ST Fiber Cables
- Interchangeable ST-ST Fiber Connector
- Ethernet Cable
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Carrying Case (G)