Fluke OneTouch 10/100 kit with accessories

Fluke NetTool 10/100/1000 Series II Network Tester

Fluke OneTouch Series II kit with accessories

Fluke OneTouch Series II Pro MM Fiber Tester

Fluke OneTouch Series II MM Fiber 10/100 Tester

$0.00
Availability: Out of stock
SKU
6H25

Condition: Refurbished

Warranty: 90 Day Exchange

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

In todayメs switched, Fast Ethernet and TCP/IP environments, network technicians are faced with the usual challenging problems ラ congestion, server access, errors and port identification. With the One Touch Network Analyzer, you are one touch away from solving complex network problems.

Features:

  • Verifies connectivity to a list of user-defined devices such as routers, servers and switches
  • Discovers switch information and maps devices to individual switch ports
  • Pinpoints duplicate IP addresses on your network with a single touch
  • Troubleshoots network problems with remote monitoring and control via a web browser
  • Identifies cable length, opens, crossed wires, and split pairs
  • Identifies network connections that are not currently used by desktop connections

The OneTouch Series II Pro supports secure remote control in addition to the basic web access available in the OneTouch Series II model.

OneTouch Series II vs OneTouch Series II Pro

Model  Locate, View
and Store
500 Nodes 
Network 
Health 
TCP/IP
Discovery 
Switch
Discovery 
Remote
Web
Monitoring 
Remote 
Web 
Control 
Device
to
Switch 
Config
Master 
Key
Device
Ping 

Active Discovery
of Endpoints,
Servers
and Gateways 

Configure
VoIP
Port Settings 
Cable
Testing 
Series II 10/100   ユ  ユ  ユ  ユ  ユ  ユ
Series II 10/100 Pro   ユ  ユ  ユ  ユ  ユ  ユ  ユ  ユ  ユ  ユ  ユ  ユ

Switch Discovery

The OneTouch Series II uses Simple Network Management Protocol (SNMP) queries to obtain information about discovered switches. The OneTouch reports switch information such as name, description, and uptime. In addition, the OneTouch reports a list of switch interfaces, interface type and whether each switch interface is up or down.

Station to Switch Port Mapping

The station to switch port-mapping features allow a technician to discover where a device is attached to on a switch. A technician chooses a discovered station from the station list and sees which switch port that station is attached to. The switch name, description, address and port number are displayed. This feature is also available under the Connectivity Tests as Station Locator. A technician types in either a MAC address or an IP address and the OneTouch Series II tester displays the switch port to which that particular device is attached.

Remote Monitoring

Web Monitoring and Control Via a Web Browser

Imagine the time and money that you would save if you could ship a test tool instead of a tech, to a remote site. Instructing a person at that site on how to plug it in, you could monitor and identify problems at that site, via your web browser. The OneTouch Series II Pro supports remote control in addition to the basic Web monitoring available in the standard model.

NIC and Hub Tests screen

The OneTouch Series II tests network components such as NIC cards and hub ports. When the OneTouch Autotest is run, the OneTouch tests the hub port and reports link pulse receive voltage level, signal polarity, receive signal pair, capability of the hub port (10 or 100) and duplex status (half or full). The OneTouch also makes sure that a packet can be transmitted past the hub port. When the OneTouch tests a NIC card, it reports the link pulse receive voltage level and MAC and network addresses of the NIC card.

Connectivity Testing

Cable and Fiber Tests screen

The OneTouch Series II features an internal wiremap termination so a troubleshooter can quickly run a wiremap test on a suspect patch cable. The OneTouch also provides a Cable Autotest that detects the determination and runs an appropriate set of cable tests. The OneTouch Series II measures cable length on open cable and can identify split pairs, opens, and shorts. By using the optional Fiber Test Kit, a technician can also measure power and loss on a fiber cable.

Moves, adds and changes

One hundred network users need to be moved over the weekend. Two technicians are assigned to confirm that for each day, the move is done correctly. Using their OneTouch Series II Network Assistants, they confirm each PC configuration using the ConfigMaster feature. They run an Autotest to check the cable, hub, and general connectivity. Finally, they run a Key Device Ping to check connectivity to the local segment router, switches and printers. Monday morning arrives and all users are up without any complications.

ConfigMaster

A touch of the ConfigMaster icon and the OneTouch Series II Pro users get critical information to properly configure a device or workstation. Network information includes DNS server name, IP address range, subnet mask, default gateway, POP3 server, DNS, WINS server, frame type, and NetBIOS name. This handy feature eliminates the trial-and-error method of workstation configuration.

One-button Autotest

Just one touch of the AutoTest icon displays the connectivity status of desktop stations, TCP/IP devices, servers, and even devices past switches. For example, pressing the NetWare server icon displays the nearest server for each of the four Ethernet frame types (IEEE 802.2 and 802.3, Ethernet II, and SNAP). For all discovered NetBIOS servers, the following are displayed: name, domain, server type, protocols and MAC addresses. Pressing the station list icon provides a list of discovered stations that can be sorted by device type, utilization, protocol or name. Pressing the TCP/IP icon takes the user to the TCP/IP discovery screen.

Key Device Ping

The OneTouch Series II allows a user to build a custom list of devices that the OneTouch will ping. For example, a user could build a list of key devices on a segment that a technician could ping after each move, add, or change. The Series II allows the user to build up to five custom lists.

Monitor & Document

Now you can generate network performance reports using a OneTouch Series II Network Assistant and the PC-based OneTouch Series II Reporter Software Package.  
  This intuitive report package collects data from the OneTouch unit running on your local segment and then presents the information in professionally formatted documents.

With a click of your mouse, you can create reports or you can set time parameters to trend your network, from 20 minutes to 24 hours.

Generate the following reports with the OneTouch Series II Reporter Software:

  • IP Inventory
  • NetBIOS Inventory
  • Top Talkers
  • Protocol Mix
  • Ethernet Collision Summary
  • Ethernet Error Summary
  • Ethernet Network Usage

Need more real time monitoring and documentation capabilities for your switched Ethernet network? Network Inspectorル OneTouch Edition combines the capabilities of the OneTouch Reporter package with Network Inspector's unlimited-node, single site license, 1 console discovery and Switch Inspectorル option.

Performance Testing

Network Health Advice

Determining an acceptable collision or utilization level is not always obvious from the network statistics, particularly for less experienced troubleshooters.

The OneTouch Series II Network Advice feature interprets critical Ethernet parameters - such as collisions, errors, and broadcasts - in the context of traffic levels. With a single touch of the Network Advice icon, users are empowered to interpret results that in the past required advanced expertise. Network Health also displays top protocols, top senders, and discovered stations.

Internetwork Throughput Option

Test IP Performance Across Enterprise Backbones, WANs and VPNs

The Internetwork Throughput Option (ITO) for the OneTouchル Series II Network Assistant enables IP Performance testing during the installation and maintenance of Enterprise backbones, WANs, and VPNs.

With the OneTouch Series II ITO, you can:

  • Measure IP throughput across a campus backbone
  • Test IP Performance across a WAN and compare to an SLA
  • Baseline congestion when installing a VPN

The IP Performance Test requires a OneTouch Series II Network Assistant to be configured with an IP address at each end of the link under test. The link may be wireless, routed, transparent or asymmetric (xDSL or cable modems) as long as an Ethernet connection is available at both ends.

Results include IP throughput rate measured in bits per second, number of frames received and number of frames lost. You can customize upstream and downstream speed, duration of test, frame length and data pattern.

Unlike PC or workstation-based tools that rely on specific operating systems, network adapter cards, software drivers or configurations, the OneTouch Series II Network Assistant Internetwork Throughput Option provides independent, repeatable results.

Single-Ended Testing
The Internetwork Throughput Option enables a OneTouch Series II Network Assistant to perform valuable single-ended testing including traffic generation on a local segment and sending IP and IP Ping traffic to remote IP devices.

The applications include:

  • Simulation of additional users on a segment by generating Ethernet traffic
  • Simulation of error conditions by generating short frames or jabbers
  • Identification of bottlenecks by successively pinging devices along a suspect path

The OneTouch transmits Ethernet level traffic by transmitting unicast or broadcast packets. It enables you to transmit IP traffic to a far-end IP device. It will also allow you to transmit ICMP Echo Request packet or IP Ping traffic to a far-end IP device.

Complete Specifications

OneTouch Series II Network Assistant
Media Access 10BASE-T and 100BASE-TX
Cable Tests Length, wiremap, split pairs
Ports Hub/NIC connector (RJ-45)
Wiremap connector (RJ-45)
RS-232C PC/Printer port (DB-9)
Printers Used HP LaserJet series
Interface Icon-based touchscreen display
Battery Removable/rechargeable NiMH battery
Dimensions 22.1 x 11.8 x 6.3 cm (8.7 x 4.65 x 2.48 in)
Weight 0.7 kg (1.7 lbs)

Power Meter Specifications

Output:  1 mV per 1 dB 
Input Connector Type:  Fixed ST 
Photodetector Type:  Germanium 
Application Range:  800 to 1600 nm 
Calibrated wavelengths:  850, 1300, and 1550 nm 
Acceptable fiber types (sizes):  9/125 to 100/140 µm 
Operating range:  +3 to -50 dBm 
Maximum power level:  +5 dBm 
Absolute accuracy:  ±0.25 dB, (Specified at 25°C & -10.0 dBm per NIST standard) 
Relative accuracy:  ±0.15 dB, (Specified over any 10 dB within measurement range) 
Repeatability:  ±0.04 dB 
Battery type:  9V alkaline, NEDA 1604A or IEC 6LR61 
Battery life:  16 hours minimum, 100 hours typical, 9V alkaline 
Low battery indication:  Blinking LED indicator 
Operating temperature:  0 to +40°C 
Storage temperature:  -20 to +70°C 
Humidity:  0 to 40°C, up to 75% RH 
Electromagnetic Compatibility:
RF Field =1 V/m
RF Field = 3 V/m 
Total Accuracy
= Specified Accuracy
Specified Accuracy + 2.5 dB 

Source (850, 1300, 850/1300) Specifications

Type:  Infrared LED 
Wavelength:  850 ± 30 nm
1300 ± -40/+50 nm
850/1300 ± 30 nm, -40/+50 nm 
Output power:  -20 dBm, nominal into 62.5/125 micron multimode fiber 
Output connector type:  Fixed ST 
Beam divergence:  0.3 radians 
Pulse duration:  Continuous wave 
Maximum output:  200 µW (radiated into free space) 
Stability:  ±0.2 dB per 8 hours at 20°C after 20 minute warmup 
Temperature coefficient:  -0.08 dB per °C, < 18°C or > 28°C 
Battery type:  9V alkaline, NEDA 1604A or IEC 6LR61 
Battery life:  16 hours minimum, 24 hours typical, 9V alkaline 
Low battery indication:  Blinking LED indicator 
Operating temperature:  0 to +40°C 
Storage temperature:  -20 to +70°C 
Humidity:  0 to 40°C, up to 75% RH 

Includes:

  • Fluke OneTouch Series II 10/100 w/ Fiber Option
  • Fluke FOM Fiber Optic Meter
    • 850nm
    • 1300nm
    • 1550nm
  • Fluke FOS Fiber Optic Source
    • 850nm
    • 1300nm
  • Fluke Cable Identifier
  • Cat5e Patch Cable
  • (2) MM ST-ST Fiber Cables
  • ST-ST Fiber Connector
  • Battery Pack
  • AC Adapter/Charger
  • Power Cord
  • RS232 PC Interface Cable
  • Fluke OneTouch Series II Getting Started Guide On CD-ROM
  • User Manual On CD-ROM
  • Hard Case For Fiber Testers
  • Carrying Case

For full Fluke Networks Onetouch Series II product specifications, please click here: Fluke Networks Onetouch Series II
Fluke Networks OneTouch Series II 10/100 Network Assistant
With Multimode 850nm/1300nm Fiber Test Option:
Power Meter
- 850nm
- 1300nm
- 1550nm
Source
- 850nm
- 1300nm

Troubleshoot Network Connections & Perform 10BASE-T and 100BASE-TX Length, Wiremap & Split Pair Cable Tests.

Fluke OneTouch One-Touch Series II MM Network Assistant Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.