| Due to strict commerce control regulations, AAATesters does not ship or export Thermal Imagers to any countries outside of the United States. |
| International customers, please note that we cannot complete any order that includes a Thermal Imager product. AAATesters cannot complete any sale where the intent may be that a Thermal Imager product may be exported internationally by the end user. |
| All customers that are purchasing Thermal Imager products from AAATesters will be required to complete a BIS-711 end use agreement form to ensure that the Thermal Imager product will not be exported internationally. |
Everything needed for everyday imaging.
The affordable Fluke Ti30? Thermal Imager is an unbeatable solution for predictive maintenance:
Complete imaging solution - The Ti30 thermal imager is packaged with all necessary accessories and unlimited-use InsideIR? companion software.
Fast and easy inspection routing - Plan your equipment inspection route, load it once into the imager, and then follow the easy, on-camera instructions each time you perform inspections.
Designed for industrial use - With over five hours of continuous-use battery life and the capacity to store up to 100 images, it allows for a full day of uninterrupted inspections.
Lowest cost of ownership - An exceptional value for a high performance imager, the Ti30 also offers affordable instrument service and calibrations.
The Fluke Ti30 Thermal Imager is just what you need to make an effective predictive maintenance program easy, fast, accurate and affordable. It?s the tool you?ll reach for again and again for scheduled inspections, quick spot checks, and everything in between. Start or enhance your predictive maintenance program with the imager that gives you the features, software, and temperature range without the big price tag.
The Fluke Ti30 Thermal Imager uniquely supports thermography inspection routing. After the first inspection, the images taken can be combined in the InsideIR? software with location names and temperature data, and uploaded to the imager for use as a routing guide. During subsequent inspections, an on-camera display prompts the user exactly where to take images?improving accuracy. The new images are easily compared to previous scans, helping to identify potential problems before they cause failure.
Maintenance personnel can quickly and easily capture high-quality infrared images using the Fluke Ti30 Thermal Imager. Because the camera collects 12 bits of information for every one of its 19,200 pixels, users in the field can simply point, focus and shoot. With a properly composed, well-focused image, all further analysis can be performed with the InsideIR software in the quiet, comfort and safety of an office.
In the imager during the scan, or later in the InsideIR software, adjust:
- Palette settings
- Emissivity
- Reflected temperature correction values
- Level and gain
|
This approach provides flexibility and eliminates the need to re-scan equipment if different settings are desired once the user is back in the office. The file of images and data can also be e-mailed to other Ti30 imager-InsideIR software users, making information sharing and cross-checking easy.
The Fluke Ti30 Thermal Imager:
- Easy to use; just point, focus, and shoot
- Scans quickly and smoothly
- Displays thermal image and temperature
- Has a temperature measurement range of -10 °C to 250 °C
- Has a Laser sighting aid that can easily be turned on or off
- Includes professional analysis and reporting software - InsideIR?
- Has industry leading battery life (> 5 hours continuous use)
- Runs off both a rechargeable battery pack and standard or rechargeable alkaline AA batteries
|
Adjustments on the Fluke Ti30 Imager include:
Start up screen makes it easy to determine instrument status including:
Display icons include:
- LCD illumination level
- Palette type
- Measurement mode
- Laser status
|
| Key Specifications |
| Temperature measurement accuracy |
 |
+/- 2% |
|
| Repeatability |
|
+/- 1% |
|
| Lightweight (including battery) |
|
1kg |
|
| Array size |
|
160 x 120 |
|
| Display frequency |
|
20 Hz |
|
| NETD |
|
0.2ºC |
|
| Specifications |
| Thermal Specs |
| Temperature Range: |
-10° to 250°C (14° to 482°F) |
| Detector type: |
120 x160 thermal element focal plane array (FPA) uncooled microbolometer |
| Accuracy: |
±2% or ±2ºC |
| Accuracy (from -10 to 0 C): |
+/- 3ºC |
| Repeatability: |
±1% or ±1ºC (±2ºF) whichever is greater |
| NETD: |
200 mK |
| Temperature Indication Resolution: |
0.1 (ºF or ºC) |
|
| Optical/IR |
| Spectral Range: |
7-14 microns |
| Target Sighting: |
Single Laser Dot (Meets IEC Class 2 & FDA Class II requirements) |
| Optical Resolution: |
90:1 |
| Slit Response Optical Resolution: |
225:1 |
| Minimum Diameter Measurement Spot: |
7mm (0.27?) at 61cm (24?) |
| Image Frame Rate: |
9 Hz (20 Hz for USA and Canada) |
| Field of view (FOV): |
17º Horizontal x 12.8º Vertical |
| Instantaneous Field of view (IFOV): |
1.9mrad |
|
| Controls |
| Focus: |
Focusable, 61cm (24?) to infinity |
| Temperature Scale: |
ºC or ºF selectable |
| Palettes: |
Gray, Ironbow or Rainbow selectable |
| Measurement Modes: |
Automatic, Semi-Automatic, or Manual selectable |
| Laser On/Off: |
included |
| Gain Control: |
included |
| Level Control: |
included |
| LCD Backlight: |
Bright, Dim, Off selectable |
|
| Operational |
| Adjustable Emissivity: |
0.10 to 1.00 by 0.01 |
| Liquid Crystal Display: |
TFT technology?optimized for both indoor and outdoor use, 59mm (2.3 in) x 54mm (2.1 in) |
| Reflected Background Temperature: |
-50 to 460ºC (-58 to 860ºF) |
| Ambient Operating Temperature: |
-10 to 50ºC (14 to 122ºF) |
| Relative Humidity: |
10 to 90% Non-condensing |
| Storage Temperature: |
-25 to 70ºC (-13 to158ºF) [without batteries] |
| Storage Capacity: |
100 images |
| Laser On Icon: |
included |
| Low Battery Icon: |
included |
| Palette Icon: |
included |
| Measurement Mode Icon: |
included |
| Thermal Analysis Software: |
InsideIR (included) |
| PC Software Operating Systems: |
Microsoft® Windows® 98®, Windows 2000®, or Windows XP® |
|
| Electrical |
| Power: |
6 AA batteries (not included) or rechargeable battery pack (included) |
| Battery Life: |
Min. 5 hours continuous use |
| Data Transfer: |
USB interface, total transfer time 30s for 100 pictures |
| Storage Device: |
Flash Memory |
|
| Other |
| Tripod Mount (6.35 mm (1/4) 20 unc threading) |
|
| Weight (includes batteries): |
1 kg (2.2 lb) |
| Drop Test Results: |
0.5 m (20 in.) |
| Manufacturing site: |
Made in U.S.A. |
| Shock: |
30G, IEC 68-2-29 |
| Vibration: |
2.5G, IEC 68-2-6 |
| EMC: |
EN 61326-1 |
|
For full Fluke Ti30 product specifications, please click here: Fluke Ti30
Fluke Ti30 Infrared Thermal Imager
20 Hz With a Focal Plane Array Of 160 x 120
Temperature Range: -10° to 250°C (14° to 482°F)
Includes Hard Carrying Case & Accessories As Listed
Fluke Ti30 Ti 30 Thermal Imager Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 25553-L/T*
