3M Dynatel 2250M Receiver & Transmitter

3M Dynatel 2250M Cable Pipe Locator w/ Transmitter 2250

Sumitomo Type-Q101-CA+ kit with accessories

Sumitomo Type-Q101-CA+ SM MM Fiber Fusion Splicer

Fujikura 70R SM MM Ribbon Fiber Fusion Splicer

$8,999.00
Availability: In stock
SKU
2i79

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Fujikura 70R Fusion Splicer
The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

Features:
  • Automated and programmable wind protector
  • 40-second automated tube heater
  • Fully ruggedized for shock, dust and moisture
  • Li-ion battery with 110 splices/shrinks per charge
  • On-board training and support videos
  • Internet software upgrades
  • Multi-function transit case with integrated workstation
Specifications:
Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Fiber Count Single, 2, 4, 5, 6, 8, 10, 12
Cladding Diameter 125 µm
Coating Diameter Ribbon: 0.25 mm to 0.4 mm, Single: 250 µm and 900 µm
Fiber Cleave Length 10 mm
Typical Average Splice Loss 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T standards
Splicing Time Typical 15 seconds with standard single-mode fiber
Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera cladding alignment
Splice Loss Estimate Based upon dual camera cladding alignment data
Storage of Splice Result Last 2000 splice results stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
Magnification 35X to 90X
Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating
Operating Condition 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively
Mechanical Proof Test 1.96 to 2.25 N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves
Protection Sleeve Length 60 mm, 40 mm, Micro
Splice/Heat Cycles with Battery Typical 110 cycles with power save functions activated
Electrode Life 1,500 Arc Discharges
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery
Terminals USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03
Wind Protection Maximum wind velocity of 15m/s (34 mph)
Dimensions 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)
Weight 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery




For full Fujikura 70R product specifications, please click here: Fujikura 70R

Fujikura 70R SM MM Ribbon Fiber Fusion Splicer

The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs


Includes Fujikura CT-30 High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed

70R

Fujikura 70R Fujikura70R Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 39498-L/T* 20894M-L/T* 20895M-L/T*

  • Fujikura 70R Ribbon Fiber Fusion Splicer (BC# 39498-L/T*)
  • Fujikura CT-30 High Precision Fiber Cleaver w/ Case (BC# 20895M-L/T*)
  • Clauss CFS-2 Fiber Stripper 
  • 6 Month Fusion Splicer Care Kit FS6MC:
    • 4oz Flip Jar Of 99% Alcohol
    • (50) Non-Lint Dry Wipes
    • (6) Fiber Optic Wipes w/ 99% Alcohol
    • 2oz Pump Fast Evaporating Mirror Spray
    • (25) Camera Swabs
    • (25) V-Groove Swabs
  • Fujikura HJS-02 Hot Jacket Stripper w/ DC Cord (BC# 20894M-L/T*)
  • FH-50-250 Fiber Holder Set
  • FH-50-12 Fiber Holder Set
  • Fujikura ADC-18 AC Adapter
  • Fujikura BTR-09 Battery Pack
  • DCC-18 Charge Cable
  • Sleeve Loader
  • 70R Quick Reference Guide
  • Screwdriver
  • Power Cord
  • USB PC Interface Cable
  • User Manual On CD-ROM
  • Strap For Unit
  • Hard Carrying Case w/ Strap
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!