Fujikura 70S SM MM Fiber Fusion Splicer

Fujikura 70S Fiber Fusion Splicer
The Fujikura 70S is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion.

Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 14-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

Features:

• Automated and programmable wind protector
• 14-second automated tube heater
• Fully ruggedized for shock, dust and moisture
• Li-ion battery with 200 splices/shrinks per charge
• • 5 mm cleave length for splice on connector or small package needs
• Sheath clamp or fiber holder operation
• On-board training and support videos
• Internet software upgrades
• Multi-function transit case with integrated workstation

Specifications:

Applicable Fibers	Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Cladding Diameter	80 - 150 μm
Coating Diameter	100 μm to 1,000 μm
Fiber Cleave Length	5 to 16 mm
Typical Average Splice Loss	0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards
Splicing Time	SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds; AUTO mode — 15 seconds with SM fibe
Arc Calibration Method	Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes	100 preset and user programmable modes
Splice Loss Estimate	Based upon dual camera core axis alignment data
Storage of Splice Result	Last 2,000 results stored in the internal memory
Fiber Display	X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification	320X for single X or Y view, or 200X for X and Y view
Viewing Method	Dual cameras with 4.7 inch TFT color LCD monitor
Operating Condition	0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test	1.96 to 2.25N
Tube Heater	Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time	Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves
Protection Sleeve Length	60 mm, 40 mm, micro
Splice/Heat Cycles with Battery	Typical 200 cycles with power save functions activated
Electrode Life	3,000 Arc Discharges
Power Supply	Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery
Terminals	USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03
Wind Protection	Maximum wind velocity of 15 m/s. (34 mph)
Dimensions	146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)
Weight	2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery

For full Fujikura 70S product specifications, please click here: Fujikura 70S

Fujikura 70S SM MM Fiber Fusion Splicer

Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs

Includes Fujikura CT-30 High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed

FSM 70 FSM-70S

Fujikura 70S Fujikura70S Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry

 

BC# 40884-L/T*

• Fujikura 70S Fiber Fusion Splicer (BC# 40884-L/T*)
• Fujikura CT-30 High Precision Fiber Cleaver w/ Case
• Clauss CFS-2 Fiber Stripper 
• 6 Month Fusion Splicer Care Kit FS6MC:
  • 4oz Flip Jar Of 99% Alcohol
  • (50) Non-Lint Dry Wipes
  • (6) Fiber Optic Wipes w/ 99% Alcohol
  • 2oz Pump Fast Evaporating Mirror Spray
  • (25) Camera Swabs
  • (25) V-Groove Swabs
• Fujikura ADC-18 AC Adapter
• Fujikura BTR-09 Battery Pack
• DCC-18 Charge Cable
• Power Cord
• Cooling Tray
• Sleeve Loader
• USB PC Interface Cable
• 70s Reference Guide
• User Manual On CD-ROM
• Hard Carrying Case

Having trouble viewing this file? Click this link to download