Fujikura FSM-20CSII Splicer & Ando AQ-7155 SM OTDR
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Fujikura FSM20CSII fusion splicer utilizes a PAS (Profile Alignment System) that aligns the core of single-mode and the cladding of multimode fibers. A built in monitor allows cross-sectional viewing of the prepared fiber ends, and displays cleave angle and estimated splice loss. the system will splice both single-mode and multi-mode fibers. Alignment, fusion and splice loss estimation are automatically completed by the built-in computer.
Features:
- Fiber Splicing Capabilities: SM, MM
- Splice Loss Estimation Function/ Calculation Capability
- Atmosphere, humidity and temperature compensation functions provided
- 3" LCD monitor with excellent view ability in direct sunlight
- Memory: 100 splice data sets with internal memory
- High Intensity Halogen Inspection Lamp
The FSM-20CSII Arc Fusion Splicer is used for splicing SM (Single Mode) optical fiber and MM (Multi Mode) optical fiber. Mutual aligning of both SM and MM optical fibers is performed automatically by the image processing microcomputer built into the splicer. The power source applicable for this system is AC85-265V (50160Hz) or DCIO- 15V. The AC voltage selection is automatic.
It can be preset for 20 different splicing modes (10 settings for SM fibers and 10 settings for MM fibers). This allows various fiber types to be spliced. Each mode consists of 6 parameters (ARC POWER, ARC TIME, FORWARD, PREFUSE, GAP, ECF). See Section 2.1.2. For SMl-SM10, core axis alignment and splice loss estimation are performed automatically. For MMl-MMlO, fiber cladding alignment and splice loss estimation are performed automatically.
The Ando AQ-7150 Series Mini-OTDR offers the following features:
- 1/5 the size and weight of existing full-size OTDR units.
- Measurement can be performed by the press of a single button.
- Battery operation allows the unit to be used in the field.
- Data can be stored on an PCMCIA memory card. The data on the memory card can be analyzed on the IBM-compatible personal computer using emulation software (sold separately).
- SET UP conditions, data list and measured traces can be printed out.
With these features, this unit can be widely used to measure fiber cable from subscriber lines to repeater systems and has application from cable installation to restoration and maintenance
Fujikura FSM-20CSII SingleMode & MultiMode Fiber Arc Fusion
Splicer
&
Ando AQ-7155 Singlemode 1310nm / 1550nm Mini OTDR
Singlemode Fiber: Core Alignment
Multimode Fiber: Cladding Alignment
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99%
Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25)
V-Groove Swabs
Includes USFiberOptic USF21C High Precision Fiber Cleaver, Hard Carrying Case, Carrying Case & Accessories As Listed
FSM 20CSII AQ7155 AQ 7155
BC# 14015 14273
- Fujikura FSM-20CSII Arc Fusion Splicer (BC# 14015)
- USFiberOptic USF21C High Precision Fiber Cleaver w/ Case
- Clauss CFS-2 Fiber Optic Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- DC Power Cord
- Power Cord
- User Manual ON CD-ROM
- Hard Carrying Case (G)
- Ando AQ-7155 Singlemode Mini OTDR (BC# 14273)
- 1310nm
- 1550nm
- Interchangeable FC Connector
- Fujitsu Memory Card 512K
- (2) SM FC-FC Fiber Cables
- AC Adapter/Charger
- Power Cord
- User Manual On CD-ROM
- Strap For Unit
- Carrying Case w/ Strap