Siecor CFS PK7500 kit with accessories

Siecor CFS Compact Fusion Splicer & PK7500 OTDR

Sumitomo Type-25 FIS OVM-9899A kit with accessories

Sumitomo Type-25 QMS-02 & FIS OVM-9899A OTDR

M90 3000 Series Fusion Splicer & Schlumberger OTDR

$0.00
Availability: Out of stock
SKU
3K154

Condition: Refurbished / Calibrated

Warranty: 90 Day Exchange

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

Siecor M90 3000 Series Fusion Splicer

The microprocessor controlled fusion splicer is used for mechanically durable, low-loss fusing of optical fibers with long-term stability.

Fiber Diameters
Single-mode fibers, dispersion-shifted single-mode fibers and multimode fibers with coating diameters of up to 900 ᄉm can be fused. The splicer is designed for use with the standard 125 ᄉm outside fiber diameter (without coating). If you need to splice fibers with other diameters, please contact the manufacturer.

Automatic Fiber Positioning
Fiber positioning and the fusion process run automatically. This assures uniform high quality results independent of the operator. Two mutually independent processes for positioning and automatic splice loss determination have been integrated into the splicer. The time tested LID system (Local Injection and Detection) allows for accurate core-to-core positioning of the fiber ends such that good splicing results can even be achieved with singlemode fibers with eccentric cores. It also allows for the measurement of splice loss at an operational wavelength of 1300 nm. If the LID system cannot be used (e.g. with tight-buffered fibers), the completed splice is analyzed with the L-PAS -video system (Lens Profile Alignment System), and splice loss is indicated in dB as well.

Fiber Requirements: Single and multimode glass fiber with 125 ᄉm glass diameter, 250 to 900 ᄉm coating diameters
Fiber Display: High contrast 5.5" color LCD
Magnification: Approximately 100 power
Fiber Positioning: Fully automatic in X, Y and Z axes
Mean Splice Loss for Identical, Standard Single-Mode Fibers:

  • Multimode fiber: typ. < 0.01 dB
  • Standard single-mode fiber: typ. < 0.02 dB

Tensile Test: Automatic / OFF
Splicing Programs: Preset, special and user programs
Video Output: CCIR output (75 ohm)
Mains Power: 95 to 260 V with automatic voltage range selection, 50 - 60 Hz, max 100 VA
External 12 V Power Supply: 12 - 14.5 V, max. 5 A, pole reversal protected
Data Memory Capacity: 1000 splice values
Data Output: RS 232 interface with adjustable baud rate
LID System: Wavelength: 1300 nm, temperature compensated
Attenuation Splices: 1 to 10 dB (in steps of 0.1 dB)
Real-Time Clock: Time and date display with battery backup
Operating Temperature: -5ᄚ C to +45ᄚ C
Storage Temperature: -20ᄚ C to +70ᄚ C

 

 

 

 

Shclumberger Flash OTDR 7976

Flash Mini-OTDR Mini-OTDR Wavetekメs hand-held Flash miniOTDRs set new standards in OTDR performance, weighing less than 4 lbs. while conducting most of the functions of full-sized OTDRs. Named fiber optic Product of the Year in '94, the Flash is designed to fully maximize field performance. It features a rugged protective case, a scratch-resistent front cover, a back-lit LCD display, and an optional rubber shock-absorbing case protector. In addition, its extremely low power consumption allows over 8 hours of continuous field use.
 
With its easy to use 6 button front panel and user-friendly interface, the Flash is designed to meet the fiber testing needs of both the occassional and experienced user. The Flash is currently available in singlemode and high resolution models (to be available in multimode). It is completely software driven and field configurable, providing users with an array of testing options, from fast fault location to more advanced fiber link commissioning. The Flash's Validation operating system consists of three modes: maintenance, construction and validation. Each mode is loaded into the unit from memory cards, which provides greater flexibility and is more cost-effective for customers.

 Flash Maintenance
The maintenance mode is most commonly used for the maintenance of fiber links. The user's main goal is to locate faults and repair them. When in this mode, measurements are completely automatic. When an acquisition is started, the Flash will automatically determine the required parameters, control the injection level and pulsewidth, and provide a table of results.

Features:

  • The Smallest Full-Featured OTDR available
  •  Easy to Learn . . . Easy to Use
  •  Full Auto Event Detection
  •  Software Driven and Field Configurable: Maintenance, Construction, Validation
  •  Fast Acquisition Time and Autoranging
  •  8 Hour Battery Duty Cycle
  •  Lightweight; < 4 lbs.


After the fault has been located and repaired, confirmation of the exact location and repair quality can be confirmed. This information may then be printed as required. In addition, the Flashメs low attenuation detection (0.05 dB) and reflectance levels allow users to obtain extremely detailed results for a concise summary of an event.

 Flash Construction
The construction mode is used primarily by those installing fiber optic networks. Technicians may perform analysis of a link using an automatic table of results or a one button toggle to a trace view. The unit always allows the user to perform manual measurements. When studying a trace, users have several options. The advanced zoom feature, using the x and y axes, allows detailed analysis of events at specific locations on the fiber. If such detailed analysis is not necessary, the Hunt function enables users to toggle directly to the next event on a trace and then zoom in for a closer look. All data collected in the field may be printed and stored immediately using either the internal memory or the built-in PCMCIA card slot and memory cards. Data may also be downloaded, using the RS232 port, directly to a personal computer or printer. The memory cards also make instrument upgrades quick and easy.

 Flash Validation
The validation mode generally is used for commissioning and other detailed analysis of a fiber link. When in this mode, users can make testing virtually automatic using the Macro feature. Users may shorten multiple tests, at different parameter settings, into a single, one-button test using the Macro feature. This assures repeatability and increases productivity. The Flash features markers that may be placed manually, for which automatic measurements may then be performed (no limitation on the detection or thresholds). This is ideal for commissioning of fiber links and is also useful for those events which may not be detected automatically, such as those too close together or those needing improved resolution. When in this mode, the Flash may also detect and suppress ghosts, the only mini-OTDR with this capability. In addition, the Flash conducts Optical Return Loss (ORL) measurements, and users also have access to more extended tables which feature slope measurements. Smoothing enables users to improve the dynamic range of the Flash when analysing a noisy fiber. The dynamic range may be improved by 2 dB.

 

Laser 7976
Fiber Type Singlemode
Central Wavelength 1310 ᄆ 30nm 1550ᄆ30 nm
Dynamic Range 24 dB 22 dB
Pulsewidth Setting 50 ns to 10 ᄉs
Laser Safety Class 1 IEC 825
Event Spatial Resolution (Typical) 50m
Range 5 to 140 km
Resolution 1m
Accuracy ᄆ2 m ᄆ 5.10-5 x distance
Programmed Values 2 s, 10 s, 30 s, 1 min, 2 min, 3 min, 5 min, 10 min
Real Time Every Second
Attenuation Accuracy ᄆ 0.1 dB or 0.05 dB/dB
Attenuation Resolution 0.01 dB
Minimum Resolution 0.05 dB
Attenuation Threshold 0.05 to 6 dB
Range -15 to -60 dB
Resolution 0.1 dB
Accuracy ᄆ 4 dB
Internal Memory 1 + 1 (Buffer Memory)

Siecor Corning M90 Singlemode Multimode Core Alignment Fusion Splicer 3000 Series
&
Wavetek Schlumberger Flash Singlemode 1310nm/1550nm OTDR

Dynamic Range:
1310/1550nm : 24/22dB

Fast Acquisition Time and Autoranging

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs

Includes Siecor FBC-005 Attached High Precision Fiber Cleaver, Integrated Hard Carrying Case, Carrying Case, & Accessories As Listed

M-90 7976

BC# 13473 12942

  • Siecor M90 3000 Series Core Alignment Fusion Splicer (BC# 13473) 
  • Siecor FBC-005 Attached High Precision Fiber Cleaver
  • 125/900 Single Fiber Holder Set
  • Clauss CFS-2 Fiber Optic Stripper
  • 6 Month Fusion Splicer Care Kit FS6MC:
    • 4oz Flip Jar Of 99% Alcohol
    • (50) Non-Lint Dry Wipes
    • (6) Fiber Optic Wipes w/ 99% Alcohol
    • 2oz Pump Fast Evaporating Mirror Spray
    • (25) Camera Swabs
    • (25) V-Groove Swabs  
  • Overhead Work Lamp
  • Spare Electrode Set
  • (2) Spare Fuses 
  • Assorted Tool Kit
  • Power Cord
  • RS232 PC Interface Cable
  • User Manual On CD-ROM 
  • Key For Case 
  • Integrated Hard Case

 

 

  • Schlumberger Flash Singlemode OTDR (BC# 12942)
    • 1310nm
    • 1550nm
  • Fiber Cables:
    • (2) SM FC-FC
  • AC Adapter
  • Power Cord
  • RS232 PC Interface Cable 
  • User Manual On CD-ROM
  • Carrying Case