KrautKramer USN50 kit with accessories

GE Krautkramer USN50 Ultrasonic Flaw Detector

Olympus Epoch LTC kit with accessories

Olympus Epoch LTC Ultrasonic Flaw Detector w/ AWS

GE Technologies DM5E Corrosion Thickness Gauge

$1,989.00
Availability: In stock
SKU
GE02

Condition: Refurbished

Warranty: 1 YEAR WARRANTY

DM5E Corrosion Thickness Gauge

The DM5E incorporates all the features of the DM5E Basic but also offers the DUAL MULTI operating mode. This has been used in previous GE corrosion thickness gauges and has proved invaluable in measuring thickness of metal through coatings. There is no need to remove the coating at the measuring point, saving time and money.

All versions of the DM5E have the same user-friendly operator keypad interface. This has a central Mode key, a calibration/on/off key, two function arrow keys to activate and set functional control and four arrow keys for adjusting parameter values and for navigating through the intuitive single level menu. The keypad allows access to all calibration, set-up and measurement display modes of the instrument. With the DL version, a file display mode allows users to create and store thickness reading s in files. All calibration is menu-driven and the operator is guided through every step. There is a built-in calibration reminder, which can be set to remind the user to calibrate after a specified number of measurements or after a given time period.

Both the DM5E and the DM5E DL offer Dual Multi Measurement. Virtually all components and structures subjected to thickness measurement will have some kind of protective coating. Such coatings, including paint, contribute significant error to thickness measurements of underlying metal walls when using conventional methods. In addition, the removal of coatings, and their subsequent reapplication, involves considerable cost and time. With the field proven Dual Multi feature there is no need to remove any protective coating. It is only necessary to select Dual Multi mode, place the probe in position and take the measurement.

Specifications:

 
Operating Principle Ultrasonic, Pulse Echo Measurement Method
Measuring Range Depends on Probe and Material, 0.60 mm to 508 mm (0.025ヤ to 20.00ヤ) in IP to 1st BW Measurement Mode, 2.00 mm to 127.0 mm
(0.079ヤ to 5.00ヤ) in Dual-Multi Measurement Mode, the Coating Thickness Range Shall be 0.3 mm to 2.50 mm (0ヤ to 0.098ヤ).
Measuring Resolution 0.01 mm Default - Selectable 0.01, 0.1 mm (0.001ヤ Default - Selectable 0.001, 0.01ヤ
Material Velocity Range 0.508 to 18.699 mm/msec (0.0200 to 0.7362ヤ/msec)
Material Velocity Resolution 1 m/s (0.0001ヤ/msec)
Units Inch or Millimeter
Calibration One-Point Cal, On-Block and Off-Block, Two-Point Cal
Pulser Excitation Pulse                                             Spike Pulser
Voltage 120 V into 50 ohm Load, Using 20 MHz Oscilloscope
Receiver Bandwidth 500KHz to 12 MHz @ -3 dB
Gain Automatic Gain Control
Display Type High-Resolution Graphical LCD, 64 x 128 Pixels, 53.0 mm x 27.0 mm with Backlight and Adjustable Contrast
Update Rate 4 Hz or 8 Hz, User Selectable, 24 Hz Scan Mode Capture Rate
Thickness Display Rate NORMAL View Mode 5 Digit, 10.6 mm (0.4ヤ) High
B-SCAN View Mode 5 Digit, 2.55 mm (0.1ヤ) High
Display of Last Reading Solid Filled or Hollow Digits Indicate Coupled or Uncoupled Condition
Setups 9 Standard Setups for Probes
Alarm Settings Minimum and Maximum Alarms, Range of 0.25 mm to 508 mm, 0. (0.010ヤ to 20.00ヤ)
Reading Alternates Between Solid and Hollow When Alarms Are Enabled and Violated
Power Requirements 2 モAAヤ Size Batteries
Battery Life/Operating Time Approximately 60 Hours
Instrument Shut-off Selectable ALWAYS ON or AUTO OFF After 5, 10, 15, 30 Minutes of Inactivity
Language Selectable English, German, French, Spanish, Italian, Russian, Japanese and Chinese
I/O Connectors Transducer Dual Lemo 00 (coax)
Mini-USB Mini-USB to PC
Temperature Operating -10°C to +50°C (+10°F to +120°F)
Storage -20°C to +60°C (-10°F to +140°F)
Weight 223 g (0.597 lb) Including Batteries
Size 138 mm x 32 mm x 75 mm
Shock IEC 68-2-27 Ea, as per Mil Std 810C Method 516.2 Procedure I with a 15g 11ms Impulse Half Sinusoidal Wave Applied 6 Times per Axis
Sealing IEC529 / IP54, Dust Proof/Dripping Water Proof as per IEC 529 Specifications for IP54 Classification




For full GE DM5E product specifications, please click here: GE DM5E

Inspection Technologies DM5E Corrosion Thickness Gauge

Offers the DUAL MULTI operating mode which allows metal thickness to be measured through coatings

Includes Hard Carrying Case & Accessories As Listed 

GE DM5E DM 5E Corrosion Thickness Gague Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 32556-L/T*

  • GE Inspection Technologies DM5E Corrosion Thickness Gauge (BC# 32556-L/T*)
  • GE DA501EN-500495 Thickness Probe
  • GE N06159 Steel Bar
  • USB PC Interface Cable
  • Wrist Strap For Unit
  • Hard Carrying Case
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!