GN NetTest CMA4000i CMA4457 SM MM Fiber OTDR
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
CMA4000i OTDR Mainframe
The CMA 4000i Optical Test System provides the most complete test and measurement solution for the All-Optical Network. With its modular design, the instrument can be configured to meet the most demanding requirements for a variety of applications from fault location to testing Dense Wavelength Division Multiplexing (DWDM) systems. The CMA 4000i can be configured as an OTDR with a Visual Fault Locator, Optical Power Meter, and Light Source; or as a high resolution Optical Spectrum Analyzer (OSA) for DWDM systems. With its variety of functions, the CMA 4000i offers the best value for optical network commissioning, troubleshooting, restoration, and maintenance applications.
Applications
CMA 4000i is the all-in-one test system for qualifying optical networks:
- Commissioning
- Fault Location / Restoration
- Maintenance
- DWDM System Turn-up
The Industry Leader in Optical Performance
High performance networks demand even higher performance test and measurement equipment -- and thereﾒs no better solution than Anritsu's award winning test and measurement solutions. The CMA 4000i continues the Anritsu tradition of worldwide leadership in optical test and measurement.
With 50 dB of dynamic range and deadzones as small as 3.0 m, the CMA 4000i is ideal for testing long haul backbone networks, metro networks, or Passive Optical Networks (PONs). For complete system characterization, the CMA 4000i can easily be equipped with a light source and power meter for complete end-to-end loss testing. In addition, its Visual Fault Locator (VFL) option enables you to locate breaks within the OTDRﾒs deadzone or identify specific optical fibers within a cable. The 4000i offers a variety of operating modes for varying OTDR applications.
DWDM System Qualification
For commissioning or maintaining networks that employ DWDM technology, the model 4792 OSA module for the CMA 4000i is the ideal instrument. It allows testing both current and future DWDM networks. Operating from 1520-1620 nm (C- and L-bands), the model 4792 OSA module can automatically identify over 400 DWDM channels spaced less than 12.5 GHz apart -- perfect for testing high capacity DWDM systems.
Characterizing complex DWDM systems is simple with the CMA 4000i. One-button operation ensures that even the novice user is capable of characterizing a complex DWDM system for channel center wavelength, power, and OSNR. Simply power on the unit with the OSA module installed to see one of the following views: Table View, Drift View, or Graph View.
Features
- Highest Dynamic Range in the industry: 50 dB
- OTDR, Loss Test Set, and VFL in a single module
- Optical Spectrum Analyzer module with 10 GHz channel resolution
- One-button testing
Operating Modes
Fault Locate Mode With its one-button auto test option, the CMA 4000i brings ease of use to a new level. Simply attach the fiber to the instrument, press Fault Locate, and your entire fiber optic cable is completely characterized for attenuation, splice loss, and reflectance. For users needing more measurement flexibility, the CMA 4000i offers the following modes to bring OTDR testing to a higher level:
Construction OTDR Mode Construction Mode simplifies and automates the tests and documentation most frequently performed during fiber installation. Construction Mode is designed for testing multiple fibers, and is ideal for cable installation and commissioning. It eliminates the time consuming setups common to the repetitive practices of testing, storing, analyzing, and documenting high fiber count cables.
From the setup screen, the operator can quickly select one or all wavelengths to test, specify the file naming structure, and enter the fiber count for a given cable. Once set up, the OTDR acts as a ﾓtask masterﾔ to perform the following functions:
- Select the wavelengths
- Test the fiber at all selected wavelengths
- Analyze the trace data
- Store the trace and analysis data to either floppy or hard drive
- Alert the technician to move to the next fiber to be tested and increment the filename to the next sequential number
Expert OTDR Mode Expert OTDR allows the user to perform traditional OTDR functions with dedicated hard keys tied to frequently used OTDR parameters such as pulse width, range/resolution, and wavelength. This mode provides unsurpassed user flexibility for optimization of OTDR parameters without stopping the test in progress. Key features of the Expert Mode include:
- Real-time Testing
- Splice Optimization
- Loss Mode Setup
- Dual Wavelength Testing
- Trace Compare Mode
- Trace Shift Capability
Views
Table View Table view is ideal for quickly characterizing a DWDM systemﾒs essential features and performance. The number of channels, channel spacing, and relative power between channels is immediately visible. The table also shows each channelﾒs wavelength/frequency, power, optical signal-to-noise ratio (OSNR), delta wavelength, and delta power.
Graph View Graph view displays full spectrum data and allows full manipulation of the waveform. Since this view displays the entire spectrum at all times, the user can zoom in while still maintaining a full spectrum view. In addition, it allows acquired and recalled data to be displayed together; this is especially useful for comparing spectra, analyzing channel power flatness, and viewing channel spacing.
Drift View Drift view is used in conjunction with the drift acquisition mode and is ideal for evaluating long-term power and wavelength stability of DWDM channels. This view displays channel number, reference wavelength, reference channel width, current wavelength, current power, minimum/maximum detected wavelength, and detected power. It can also be used to compare the received channel frequencies to the ITU standard DWDM grid or to a user-defined template, making field procedures simpler than ever.
| Mainframe Specifications | |
| Display | VGA LCD Display (21.3 cm (8.4 inch) color or 20.8 cm (8.2 inch) monochrome) |
| Floppy Drive | 3.5 inch/1.44 MB floppy disk |
| (up to 180 OTDR traces for a standard disk) | |
| Keyboard | Intergral alpha-numeric, external keyboard (optional) |
| I/O Ports | Standard: (2) RS-232 Serial, (1) Parallel, VGA, Mouse, and (1) PS/2 External Keyboard Port |
| Internal Storage | Up to 125 OTDR traces internal |
| 2 Gigabytes minimum (Over 65,000 traces with hard drive option) | |
| Dimensions (H x W x D) | 24.1 x 34.3 x 9.5 cm (9.5 x 13.5 x 3.75 inches) |
| Weight | 4.9 kg (11.0 lbs.) Includes mainframe, battery and module |
| Power Supply | Autoswitching 100-132 VAC, 47-63 Hz, 184-250 VAC, 47-63 Hz, 10-15 VDC |
| Battery | (2) Sealed lead acid battery pack |
| Battery Life | 6 hours typical, depending on operating mode |
| Recharge Time 1.5 - 2 hours | |
| AC Power Temperature | 0º C to 45º C (32º F to 122º F) |
| AC Power Humidity | 95% RH max., non-condensing |
| AC Power Maximum Altitude | 15,240 meters (50,000 feet) |
| Battery Temperature | 0º C to 40º C (32º F to 104º F) |
| Battery Humidity | 95% RH max., non-condensing |
| Battery Maximum Altitude | 15,240 meters (50,000 feet) |
| Storage Temperature | -25º C to 60º C (-13º F to 140º F) |
| Storage Humidity | 95% RH max., non-condensing |
| Storage Maximum Altitude | 15,240 meters (50,000 feet) |
CMA4457 Singlemode MultiMode Module
SPECIFICATIONS
| Center Wavelength | 850 nm ± 20 nm |
| 1300 nm ± 20 nm | |
| 1310 nm ± 20 nm | |
| 1550 nm ± 30 nm | |
| Fiber Type | Multimode and Singlemode |
| Spectral Width (RMS) | 850 nm: = 10 nm |
| 1300 nm: = 10 nm | |
| 1310 nm: = 10 nm | |
| 1550 nm: = 10 nm | |
| Dynamic Range1 | 850 nm: 21 dB |
| (SNR = 1) | 1300 nm: 24 dB |
| 1310 nm: 32 dB | |
| 1550 nm: 30 dB | |
| Initial Reflective Deadzone2 | 850 nm: 3.5 meters (typical) |
| 1300 nm: 2.5 meters (typical) | |
| 1310 nm: 3 meters (typical) | |
| Initial Non-Reflective Deadzone2 | 1550 nm: 3 meters (typical) 850 nm: 6.5 meters (typical) |
| 1300 nm: 7 meters (typical) | |
| 1310 nm: 15 meters (typical) | |
| 1550 nm: 20 meters (typical) | |
| Pulsewidth | 4 ns to 10 ìs (wavelength dependent) |
| Distance Resolution | 0.0001 km; 0.1 meters; 0.001 kft, 1 ft, 0.0001 mi |
| Distance Sampling | 0.25, 0.5, 1, 2, 4, 8, 16 meters (range dependent) |
| Distance Accuracy | 0.0025% of distance measurement ± distance |
| resolution ± index uncertainty | |
| Distance Range Setting | 2/4/8/16/32/64/128/256 km (wavelength dependent) |
| Loss Resolution | 0.001 dB |
| Laser Safety | Meets CDRH Class 1 Requirements (Eye Safe) 21 CFR |
For full GN NetTest CMA4000i CMA4457 product specifications, please click here: GN NetTest CMA4000i CMA4457
GN NetTest CMA4000i Modular mainframe w/
GN NetTest CMA4457 SM 1310 /1550nm MM 850 / 1300nm Fiber OTDR Module
Dynamic Range:
1310 / 1550nm: 32 / 30dB
850 / 1300nm: 21 / 24dB
Includes Carrying Case & Accessories As Listed
GN NetTest CMA4000 CMA4457 CMA-4000 CMA-4457 OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 26849 24879
- GN Nettest CMA4000i OTDR MainFrame (BC# 26849)
- GN Nettest CMA4457 SM MM OTDR Module (BC# 24879)
- SM OTDR Source:
- 1310nm
- 1550nm
- MM OTDR Source:
- 850nm
- 1300nm
- SM OTDR Source:
- (2) SC Connectors For Source
- (2) SM SC-SC Fiber Cables
- (2) MM SC-SC Fiber Cables
- (4) Fiber Wipes
- Battery Pack
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- User manual On Cd-ROM
- Carrying Case (G)