On Sale! Hioki 3169 Power Quality Analyzer Model Hioki-3169 Hioki 3169

Description

Hioki Clamp On 3169-20 Power Tester
CLAMP ON POWER HiTESTERs are 3169-20 and 3169-21 that allow measurement of single-phase to three-phase 4-wire circuits with a single unit. In addition to measuring standard parameters such as voltage, current, power, power factor, and integrated values, these clamp-on power meters can simultaneously perform demand measurements required for carrying out power management and energy-saving measures, as well as harmonic measurements. The two new power meters also feature PC card data storage, and come equipped with an RS-232C interface for PC communications. Further, with greater data processing speeds, it is possible to measure the power of just a few cycles, enabling more detailed and effective energy-saving measures for equipment. The 3169-20 and 3169-21 are ideal for users who want to achieve close control over energy-saving management activities and measures.

Features:

Measure power lines of up to four systems (with a common voltage)
A wide range of measurement functions
Equipped with ranges from 0.5 A to 5000 A
Supports high-speed data storage from individual waveforms
PC Card compatible plus internal hard drive for extra memory
Housed in a compact A5 body size
Multi-language Compatibility
Detect incorrect connection using vector diagrams
Polarity display and measurement using the reactive power measurement method
High-speed D/A output
Ideal for power and harmonics management

Range Configuration Table:

CLAMP ON SENSOR 9661 (5A, 10A, 50A, 100A, 500A)	Connection	5.0000A	10.000A	50.000A	100.00A	500.00A
150.00V	Single-phase 2-wire	750.00 W	1.5000kW	7.5000kW	15.000kW	75.000kW
	Single-phase 3-wire	1.5000kW	3.0000kW	15.000kW	30.000kW	150.00kW
	Three-phase 3-wire	1.5000kW	3.0000kW	15.000kW	30.000kW	150.00kW
	Three-phase 4-wire	2.2500kW	4.5000kW	22.500kW	45.000kW	225.00kW
300.00V	Single-phase 2-wire	1.5000kW	3.0000kW	15.000kW	30.000kW	150.00kW
	Single-phase 3-wire	3.0000kW	6.0000kW	30.000kW	60.000kW	300.00kW
	Three-phase 3-wire	3.0000kW	6.0000kW	30.000kW	60.000kW	300.00kW
	Three-phase 4-wire	4.5000kW	9.0000kW	45.000kW	90.000kW	450.00kW
600.00V	Single-phase 2-wire	3.0000kW	6.0000kW	30.000kW	60.000kW	300.00kW
	Single-phase 3-wire	6.0000kW	12.000kW	60.000kW	120.00kW	600.00kW
	Three-phase 3-wire	6.0000kW	12.000kW	60.000kW	120.00kW	600.00kW
	Three-phase 4-wire	9.0000kW	18.000kW	90.000kW	180.00kW	900.00kW

FLEXIBLE CLAMP ON SENSOR 9667	Connection	500.00 A	5.0000kA
150.00V	Single-phase 2-wire	75.000kW	750.00kW
	Single-phase 3-wire	150.00kW	1.5000MW
	Three-phase 3-wire	150.00kW	1.5000MW
	Three-phase 4-wire	225.00kW	2.2500MW
300.00V	Single-phase 2-wire	150.00kW	1.5000MW
	Single-phase 3-wire	300.00kW	3.0000MW
	Three-phase 3-wire	300.00kW	3.0000MW
	Three-phase 4-wire	450.00kW	4.5000MW
600.00V	Single-phase 2-wire	300.00kW	3.0000MW
	Single-phase 3-wire	600.00kW	6.0000MW
	Three-phase 3-wire	600.00kW	6.0000MW
	Three-phase 4-wire	900.00kW	9.0000MW

Specifications:

Basic Specifications:
Measurement line type	Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems (50/60 Hz)
Number of systems that can be measured (for systems that share the same voltage)	Single-phase: 1P2W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 systems 1P3W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 systems Three-phase: 3P3W2M (measures the voltage and current for two lines) . . . . . . 2 systems 3P3W3M (measures the voltage and current for all three lines) . . . 1 system 3P4W (measures the voltage and current for three lines) . . . . . . . . 1 system 3P4W4I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 system
Item	Voltage, current, active power, reactive power, apparent power, power factor, integrated value, frequency, harmonics
Measurement range	For the voltage, current, and active power ranges, see the range configuration tables
Measurement method	: Simultaneous digital sampling of voltage and current, PLL synchronization or a fixed clock (50/60 Hz)
Input methods	Voltage: Isolated input Current: Isolated input using a clamp-on sensor
Effective measurement area	Within 5 to 110% of the range
Total display area	Voltage and current: Within 0.4 to 130% of the range (zero is suppressed for less than 0.4%) Power: Within 0 to 130% of the range (zero is suppressed when the voltage or current is zero) Harmonic level: Within 0 to 130% of the range
Display	5.7-inch LCD (320 × 240 dots), with backlight
Range switching method	Manual (the current range can be set for each system)
Display update rate	Approx. every 0.5 seconds (except when using a PC card while accessing the internal memory, or when performing RS-232C communications)
Input resistance (50/60 Hz)	Voltage: 2.0 M? ± 10% (differential input) Current: 200 k? ± 10%
Maximum input	Voltage input: 780 Vrms AC, peak value: 1103 V Current input: 1.7 Vrms AC, peak value: 2.4 V
Maximum rated voltage to earth	Voltage input terminals: 600 Vrms AC (50/60 Hz)
Crest factor	Voltage: Less than 2 (for full-scale input) Current: Less than 4 (for full-scale input. However, less than 2 for the 500 A, 1 kA, and 5 kA ranges)
Internal memory capacity	1MB

Display Specifications
Instantaneous value display	Voltage, current, active power, reactive power, apparent power, power factor, frequency, average voltage, average current, (average values are for each system)
Average value display	Voltage, current, active power, reactive power, apparent power, power factor, frequency, average voltage, average current
Maximum/minimum value display	Voltage, current, active power, reactive power, apparent power, power factor, frequency
Integrate display	Integrated value Active power (consumption/regeneration) Reactive power (lag/lead)
Demand volume display (Integrated value within the specified interval)	Integrated value Active power volume (consumption/regeneration) Reactive power volume (lag/lead)
Demand value display (average value within the specified interval)	Active power (consumption), reactive power (lag), power factor
Maximum demand value display (average value within the maximum specified interval)	The maximum demand value since the beginning of time series measurement and the time and date it occurred.
Harmonics list	List of the items measured for the specified harmonic (numerical value).
Harmonics graph	Bar graph or vector diagram of the items measured for the specified harmonic
Waveform display	Voltage and current waveforms (with a magnification update function)
Measurement value enlargement display	Select and enlarge up to 5 items from the instantaneous value display.

Measurement Specifications
Measurement method	True RMS method
Measurement display	Measurement of three voltage lines and 3 or 4 current lines is possible when using three-phase 3-wire and three-phase 4-wire systems
Measurement display	For three-phase 3-wire (the 3P3W3M setting), refer to the display for phase power values.
Polarity display	For consumption: no symbol, for regeneration: "-"
[Reactive power measurement] Using the reactive	ON: Measures the reactive power directly using the reactive power measurement method OFF: Calculates the reactive power from the measurement values for voltage, current, and active power
Polarity display	For lag phase (LAG : current is slower than voltage): no symbol For lead phase (LEAD: current is faster than voltage) : "-" (Reactive power measurement method "ON")
[Apparent power measurement] Polarity display	No polarity
[Power factor measurement] Measurement range	1.0000 (lead) to 0.0000 to +1.0000 (lag) For lag phase (LAG: current is slower than voltage) :no symbol For lead phase (LEAD: current is faster than voltage) : "-"
Measurement range	40.000 to 70.000 Hz
Input area for guaranteed accuracy	Within 10 to 110% of the range (for sine wave input)
Measurement source	Voltage U1
Measurement range	40.000 to 70.000 Hz
Input area for guaranteed accuracy	Within 10 to 110% of the range (for sine wave input)
Measurement source	Voltage U1
[Integrated measurement] Measurement range	Active power : 0.00000 mWh to 99999.9 GWh consumption -0.00000 mWh to -99999.9 GWh regeneration Reactive power : 0.00000 mvarh to 99999.9 Gvarh lag -0.00000 mvarh to -99999.9 Gvarh lead
Measurement display	Active power : Displays consumption and regeneration separately Reactive power : Displays lag and lead separately
[Harmonic measurement] Measurement range	Basic wave frequency: 45 to 66 Hz PLL synchronization
Order for analysis	Up to the 40th order
Window width	A single cycle (number of data points analyzed: 128 points)
Window type	Rectangular
Analysis rate	1/16 cycles
Item for analysis	Harmonic level: The voltage, current, or power level for each harmonic order : Harmonic content percentage: The voltage, current, or power content percentage for each harmonic order : Harmonic phase angle: The voltage, current, or power phase angle for each harmonic order : Total value: The total value for voltage, current, or power up to the 40th harmo

Setting Specifications
Measurement line settings	1P2W, 1P3W, 3P3W2M, 3P3W3M, 3P4W, 3P4W4I
Clamp-on sensor settings	9694, 9660, 9661, 9667, 9669, 9695-02 and 9695-03 (* A different sensor can be set for each system.)
VT (PT) and CT ratio settings	0.01 to 9999.99 (* A different CT ratio can be set for each system.)
Measurement start method	Manual or time (year, month, day, hour, minute)
Measurement stop method	Manual, time, or timer (1 seconds to 8784 hours)
Output Interval	Standard or fast (*Maximum measurement period: 1 year) Standard interval: 1, 2, 5, 10, 15, or 30 seconds, or 1, 2, 5, 10, 15, 30, or 60 minutes Fast interval: A single waveform, or 0.1, 0.2, or 0.5 seconds
Data output destination	PC card, internal memory, or printer
File name	Automatically attached, or set the desired name (up to 8 alphanumeric characters)
Display averaging circuit	OFF, 2, 5, 10, 20 times (for movement averaging)
Screen copy destination	PC card, internal memory, or printer
Display language settings	Japanese, English, German, French, Italian, Chinese (Simple, Trad), Spanish , Korean
Other settings	Reactive power measurement method selection, harmonic distortion selection, order display selection, backlight settings, ID settings, clock settings, etc.
Copy file	Copies files from the internal memory to the PC card
Load/Save selected file	Loads/Saves the file(s) selected from the internal memory or PC card
Delete file	Deletes the file(s) from the PC card
Format	Initializes the PC card or internal memory.
Storage format	Measurement data: CSV format (binary format when using the fast interval setting) Waveform data: Binary format Screen data: BMP format Settings data: CSV format
Instantaneous values	Voltage, current, active power, reactive power, apparent power, power factor, frequency, average voltage, average current, (average values are for each system)
Average value	Voltage, current, active power, reactive power, apparent power, power factor, frequency, average voltage, average current, (average values are for each system)
Maximum/minimum value	Voltage, current, active power, reactive power, apparent power, power factor, frequency
Integrated value	Active power (consumption/regeneration) Reactive power (lag/lead)
Demand value	Active power (consumption), reactive power (lag), power factor
Maximum demand value	The maximum demand value since the beginning of time series measurement and the time and date it occurred.
Harmonic	: Each harmonic order (level, content percentage, and phase angle), total value, instantaneous value for THD-F/THD-R : Each harmonic order (level, content percentage, and phase angle), total value, average value for THD-F/THD-R for each interval : Each harmonic order (level, content percentage, and phase angle), total value, maximum/minimum value for THD-F/THD-R within each interval
Waveform	Waveform (Voltage or current)
Status information	Exceeds the voltage/current crest factor, PLL unlock, power failure, exceeds the display limit
Numerical values	Prints the data selected as the data output item (during time series measurement).
Waveform	Hard copy of the screen (printing of each interval not available)

General Specifications
Operating environment	Indoors, up to 2000m(78.74ft) ASL
Operating temperature and humidity	0 to 40°C, 80% RH or less (non-condensating)
Storage temperature and humidity	-10 to 50°C, 80% RH or less (non-condensating)
Withstand voltage (50/60 Hz for 15 sec.)	5.55 kVrms AC: Between the voltage input terminal and the 3169 casing 3.32 kVrms AC: Between the voltage input terminal and the current input terminal/external interface terminal 2.3 kVrms AC: Between the power supply and the 3169 casing 1.39 kVrms AC: Between the power supply and the current input terminal/external interface terminal
Power supply voltage rating	100 to 240 V AC, 50/60 Hz
Maximum rated power	30 VA
Dimensions and weight	Approx.210(8.27?)W × 160(6.30?) H × 60D(2.36?) mm (excluding protrusions), Approx.1.2 kg(42.3oz.) (3169-20, 3169-21)
Conforming standards	Safety EN61010 Pollution degree 2, measurement category ? (anticipated transient overvoltage 6000V) : EMC EN61326 EN61000 - 3 - 2, EN61000 - 3 - 3

For full Hioki 3169 product specifications, please click here: Hioki 3169

Additional Information

Hioki 3169 Clamp On Power HiTester Power Quality Analyzer

In addition to measuring standard parameters such as voltage, current, power, power factor, and integrated values, these clamp-on power meters can simultaneously perform demand measurements required for carrying out power management and energy-saving measures, as well as harmonic measurements

Ideal For Power and Harmonics Management

Includes (4) Hioki 9669 Clamp-On Sensors, Hard Carrying Case & Accessories As Listed

3169-20

BC# 29373-L/T*

Included