Hioki 9667 Flexible Clamp-On Sensor
$395.00
Availability:
Out of stock
SKU
PQ15
Condition: Refurbished
Warranty: 90 Day Exchange
Request a Quote for
Hioki 9667 Flexible Clamp On Sensor
Flexible Enough to Use in a Variety of Locations
Unlike conventional core (iron core coil) types, the 9667 FLEXIBLE CLAMP ON SENSOR is of the Rogovski (hollow core coil) type, which allows the unit to be light and flexible, with no heat built-up in the sensor even when measuring large currents. The sensor can be used to measure large cables of up to 254mm in diameter, and high current of up to 5000A AC. In addition, the flexible 9667 can even measure embedded wiring that is difficult to clamp with a thick, stiff core type sensor. The measurement range can be switched between 500A AC and 5000A AC, and the voltage output is 500mV AC f.s. Either four alkaline batteries (for seven days or more of continuous operation) or an AC adapter can be used for the power supply. The 9667 also carries the CE mark and is safety rated for CAT III 1000 V.
Suitable for Use as a Sensor for Power Meters and Recorders
The 9667 FLEXIBLE CLAMP ON SENSOR offers excellent phase and amplitude frequency characteristics [10Hz to 20kHz (± 3dB)]. When connected directly to a power supply voltage input power meter or recorder, the 9667 demonstrates its capabilities in large current analysis at up to 5000 A AC. For example, the sensor can be used in conjunction with the HIOKI 3196 POWER QUALITY ANALYZER to monitor power lines for abnormalities such as harmonic waves or momentary power outages, and the can also be used with the HIOKI 8800 MEMORY HiCORDER series to monitor power current waveforms.
Features:
Specifications:
Flexible Enough to Use in a Variety of Locations
Unlike conventional core (iron core coil) types, the 9667 FLEXIBLE CLAMP ON SENSOR is of the Rogovski (hollow core coil) type, which allows the unit to be light and flexible, with no heat built-up in the sensor even when measuring large currents. The sensor can be used to measure large cables of up to 254mm in diameter, and high current of up to 5000A AC. In addition, the flexible 9667 can even measure embedded wiring that is difficult to clamp with a thick, stiff core type sensor. The measurement range can be switched between 500A AC and 5000A AC, and the voltage output is 500mV AC f.s. Either four alkaline batteries (for seven days or more of continuous operation) or an AC adapter can be used for the power supply. The 9667 also carries the CE mark and is safety rated for CAT III 1000 V.
Suitable for Use as a Sensor for Power Meters and Recorders
The 9667 FLEXIBLE CLAMP ON SENSOR offers excellent phase and amplitude frequency characteristics [10Hz to 20kHz (± 3dB)]. When connected directly to a power supply voltage input power meter or recorder, the 9667 demonstrates its capabilities in large current analysis at up to 5000 A AC. For example, the sensor can be used in conjunction with the HIOKI 3196 POWER QUALITY ANALYZER to monitor power lines for abnormalities such as harmonic waves or momentary power outages, and the can also be used with the HIOKI 8800 MEMORY HiCORDER series to monitor power current waveforms.
Features:
- Lightweight, hollow-coil sensor precludes overheating even when sensing large currents
- Even flexible enough for complicated wiring
- 10Hz to 20kHz
- Phase: 45Hz to 66Hz
- AC 500/5000A rated input
- AC 500mV f.s. output
- f 254mm (10.0in) diameter
- Compatible with the Hioki 3196 Power Quality Analyzer, 3169 Clamp-on Power HiTester, & 8860-50 Memory HiCorder Oscilloscope/Datalogger
Specifications:
Rated input current | 5000 A AC |
Max. allowable input | Continuous 10000 A (at 45 to 66 Hz, requires derating at frequency) |
Output voltage | 500 mV AC/f.s. (AC 0.1 mV/ A) |
Amplitude Accuracy | ±2 % rdg. ±0.3 % f.s. (at 45 to 66 Hz, center of sensor) |
Phase Accuracy | ±1° (at 45 to 66 Hz) |
Band width | 10 Hz to 20 kHz (±3dB) |
Max. rated voltage to earth | 1000V ACrms (CAT III), 600V ACrms (CAT IV) |
Core jaw dia. | f 254 mm (10 inch) |
Power supply | LR6 (AA) alkaline batteries ×2, Continuous use : 7 days (Rated Power 35 mVA), or AC adapter 9445-02/-03 (Rated Power 0.2 VA), or External power supply 5 to 15 VDC (Rated Power 0.2 VA) |
Dimensions, mass | Sensor thickness: f 13 mm, Cable length: Between sensor and battery box: 2 m (6.56 ft), Output cable: 1 m (3.28 ft) Battery box: 35 mm (1.38 in) W × 120.5 mm (4.74 in) H × 34 mm (1.34 in) D, 470 g (16.6 oz) |
Hioki 9667 Flexible Clamp-On Sensor
Compatible with the Hioki 3196 Power Quality Analyzer, 3169 Clamp-on Power HiTester, & 8860-50 Memory HiCorder Oscilloscope/Datalogger
(3196, 3169 & 8860-50 Units Are NOT INCLUDED!)
Lightweight, hollow-coil sensor precludes overheating even when sensing large currents
Hioki 9667 Hioki-9667 Clamp-On Sensor Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 23156M-L/T*
- Hioki 9667 Flexible Clamp On Sensor (BC# 23156M-L/T*)