Ideal Lantek 6R MM Cat5 Cat5e Cat6 Cable Certifier
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Get through your jobs faster than ever today and prepare yourself for the future with LANTEK 6, the industry's most capable CAT 6/ISO E hybrid copper/fiber certifier, testing applications up to 350MHz, well beyond CAT 6/ISO E draft specifications.
The LANTEK 6 performs full Category 6/ISO E Autotest with graphs in approximately 25 seconds.
LANTEK 6 utilizes advanced link adapter method to reduce cost of ownership. LANTEK 6 comes with a pair of Category 6/ISO E channel adapters that fit into the case of the unit and are locked into place. This creates a stable and repeatable testing platform while eliminating bulky adapters. By simply plugging in a Category 6/ISO E reference patch cord to the channel adapter, you can now perform CAT 6/ISO E permanent link testing. Should the plug ever wear out, simply replace the patch cord rather than the entire assembly reducing lifetime ownership cost.
Features:
- Fully compliant with Category 6/ISO E draft standards
- Full Category 6/ISO E AutoTest with graphs in approximately 25 seconds
- Advanced link adapter method provides more versatrility & reduces cost of ownership
- Built in TDR ready for copper and fiber
- Display unit comes with 1/4 VGA color screen, remote unit comes with two-line black and white LCD display
- Serial and USP ports for uploading tests and upgrading firmware
FEATURES |
LANTEK 6 |
Frequency Range | 350 MHz |
Support CAT6/5e/3 and ISO-E/D/C | ? |
Accuracy Level III/IIIe (Draft)/IV verified by | ETL |
Support DUALmode Testing to Save Time | ? |
Test with Patchcords to Save Money | ? |
Screen Display Area | Best |
CAT6 Test Storage with Graphs | 500 |
Expansion Slots | CompactFlash Card |
Standard External Compact Flash Memory | Option |
USB/Serial Port | ? |
Copper TDR Trace | ? |
Fiber Loss Measurement (FIBERTEK) | Option |
Fiber Distance to Break (TRACETEK) | Option |
Talk over Fiber & Copper (Full Duplex) | ? |
Display Screen on Remote | ? |
Troubleshooting Tone Generator on Remote | ? |
External Rapid Battery Charger & Extra Batteries | Option |
Specifications:
Internal memory | No graphs approximately 6,000 tests | With graphs approximately 100 tests | |
External memory 32MB compact flash | No graphs approximately 24,000 tests | With graphs approximately 400 tests | |
External memory 256MB compact flash | No graphs approximately 192,000 tests | With graphs approximately 3,200 tests | |
Standard test compliance | ANSI/TIA/EIA 568B, Category 6 (draft), ISO C/D and ISO E/F (draft), AS/NZS 3080, IEEE 802.3 Ethernet, EN50173, EN50173A1 |
||
Cable types | UTP/ScTP/FTP ISO C/D/E/F (Channel, Basic, and Permanent Link) IBM STP Type 1,2,6,Coax |
||
Dimensions | 10.1" x 5.0" x 2.3" Display and remote | ||
Weight | 2.3 lb. Display | 2.0 lb. Remote | 1.2 lb Battery |
Battery Packs | NiMH rechargeable | ||
Typical operating life (battery) | 8 hrs | ||
Max. Operating Temp. | 32 to 122°F (0-50°C degrees) | ||
Max Storage Temp. | -4 to 158°F (-20 to +70°C degrees) | ||
Humidity | 5-90% noncondensing | ||
Series 6 | Range | Resolution | Accuracy |
Length (50-100O cable) | 0-2000ft | 1ft | ±(3% + 3ft) |
Delay | 0-8000 ns | 1ns | ±(3% + 1ns) |
Average Impedance | 35-180O | 0.1O | ±(3% + 1O) |
Capacitance (bulk) | 0-100 nF | 1pF or 3 dig | ±(2% + 20 pF) |
Capacitance | 0-100 pF/ft. | 0.1 pF | ±(2% + 20 pF) |
DC Loop Resistance | 0-200O | 0.1O | ±(1% + 2O) |
Noise Floor | <-90 dB | ||
Dynamic Range | >90 dB |
Fiber Adapters
The multimode 850nm/1300nm LanTek fiber adapters are the perfect solution for certifying or troubleshooting fiber backbones and fiber to the desktop installations in commercial buildings or campus environments. Working with LANTEK® 6 & 7, it measures signal loss and length over Multimode fiber. With an easy fiber adapter switch, it can support dual wavelength and bidirectional testing.
Using adapters, the LANTEK display unit can measure length in the loop-back mode. Using it in both the display and remote units, the system can measure signal loss and length with dual wavelength and bi-directional capabilities.
Specifications:
Detector Receive Wavelength: | MM: 850 nm, 1300 nm |
Measurement Accuracy | |
Attenuation: | MM 850/1300 nm: 0.25dB |
Length: | (+/- 3%) + 1 meter |
Display Resolution | |
Attenuation: | MM 850/1300 nm: 0.1dB |
Length: | MM 850/1300 nm: 1.0 meter |
Linearity | 0.2 dB |
Length Range | MM 850 nm: 3,000 meters |
MM 1300 nm: 6,000 meters | |
Minimum Length | 5 meters |
Physical Operating Temperature: Ambient Airflow: | 18 to 30°C at Specified Accuracy 0.3 Ms @ 20°C |
For full Ideal Lantek 6R MM product specifications, please click here: Ideal Lantek 6R MM
IDEAL LanTek 6R Cat5, Cat5e, Cat6 Digital LAN Cable Analyzer With 850nm & 1300nm Multimode Fiber Adapters
Please Note That The Lantek 6R Has The Same Capabilities As The Lantek 6, But Is Factory Refurbished
Test, Certify & Print Cat5/Cat5e & Cat6 Cable Installations up to 350 MHz!
VIEW TEST RESULTS EASILY ON THE LARGE COLOR LCD SCREEN
Includes Carrying Case & Accessories As Listed
IDEAL LanTek 6R MultiMode LAN Cable Certifier LanTek-6R LAN Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 5642A 5642B 19731 19732
- IDEAL Lantek 6R Main (BC# 5642A)
- IDEAL Lantek 6R Remote (BC# 5642B)
- IDEAL 850 Adapter w/ ST Connectors (BC# 19731)
- IDEAL 1300 Adapter w/ ST Connectors (BC# 19732)
- (2) Cat6/5e RJ 45 Adapters P/N: 0012-00-0629
- (2) Ethernet Cables
- IDEAL Quick Reference Guide
- (2) MM Duplex ST-ST Fiber Cables
- (2) Battery Packs
- (2) AC Adapter/Chargers
- (2) Power Cords
- RS232 PC Interface Cable
- USB PC Interface Cable
- User Manual On CD-ROM
- (2) Straps For Units
- Carrying Case (G)