Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image LAN Cable Certifiers Small Arrow Ideal Wavetek Certifiers Small Arrow LANTEK Cable Analyzer Small Arrow Lantek 7G
 



Share
 
  Click Here
To View Our Return Policy
 
Corner Image Corner Image
 

1L17 - IDEAL LANTEK 7G MM Fiber Cat6 Cat6a Certfier

IDEAL LanTek 7G Cat5, Cat5e, Cat6, Cat6a & Cat7 Digital LAN Cable Analyzer With 850nm & 1300nm Multimode Fiber Adapters

Test, Certify & Print Cat5/Cat5e Cat6, Cat6a & Cat7 Cable Installations up to 1GHz!

Included Adapters:
- (2) Ideal Cat7 TERA Adapters 0012-00-0628
- (2) Ideal Cat6A Adapters 0012-00-0656
- IDEAL 850 MultiMode Adapter
- IDEAL 1300 MultiMode Adapter

Includes Carrying Case & Accessories As Listed

IDEAL Lantek 7G Lantek-7G MM Fiber Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 6404A-L/T* 6404B-L/T*




 
 
Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
 
Condition Refurbished / Calibrated
Warranty 1 YEAR WARRANTY
Included
  • IDEAL Lantek 7G Main (BC# 6404A-L/T*)
  • IDEAL Lantek 7G Remote (BC# 6404B-L/T*)
  • Ideal 850 MM Fiber Adapter
  • Ideal 1300 MM Fiber Adapter
  • Ideal 0012-00-0642 Battery Charger
  • (2) Ethernet Cables
  • (2) TERA Cables
  • (2) Ideal Cat6A Adapters 0012-00-0656
  • (2) Ideal Cat7 TERA Adapters 0012-00-0628
  • (2) Headset / Talkset
  • E-Film PC Card Adapter w/ 64 MB Card
  • (2) MM ST-ST Fiber Cables
  • (2) Battery Packs
  • (3) AC Adapter/Chargers
  • (3) Power Cords
  • RS232 PC Interface Cable
  • USB PC Interface Cable
  • User Manual On Cd-ROM
  • Carrying Case (G)
 
Corner Image Table Bottom Corner Image
Back
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image

Ideal LANTEK® 7G LAN Cable Certification Tester

LANTEK offers a family of high performance cable certification testers to support a full range of LAN cable testing. The LANTEK family of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making channel and permanent link certification of a cable standard such as CAT6A or ISO-F possible without changing adapters. The same patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the LANTEKs save you money and time on the job.

Features

  • High-performance LANTEK 7G sweeps up to 1 GHz and supports testing requirements up to CAT 6/6a/7/ISO-F and beyond
  • Level IV/IIIe/III accuracy - independently verified by ETL for baseline, channel and permanent link
  • DUALmode testing to save time - reports channel and permanent link test results simultaneously
  • Test with patchcords to save money - performs CAT6/5e/ISO-D/Ea testing with standard patchcords to achieve the lowest cost of ownership
  • Largest internal/external memory capacity - makes record management easy
  • Convenient FIBERTEKâ?¢ accessory - simultaneously tests two fibers for attenuation and length
  • Innovative TRACETEKâ?¢ accessory - performs advanced fiber fault location and troubleshooting functions

FEATURES
Frequency Range 1 GHz
Supports CAT7 & ISO-F X
Supports CAT6a X
Support CAT6/5e/3 and ISO-E/D/C X
Accuracy Level III/IIIe (Draft)/IV verified by ETL
Support DUALmode Testing to Save Time X
Test with Patchcords to Save Money X
Screen Display Area Best
CAT6 Test Storage with Graphs 500
Expansion Slots CompactFlash Card
Standard External Compact Flash Memory 64MB
USB/Serial Port X
Copper TDR Trace X
Fiber Loss Measurement (FIBERTEK) Option
Fiber Distance to Break (TRACETEK) Option
Talk over Fiber & Copper (Full Duplex) X
Display Screen on Remote X
Troubleshooting Tone Generator on Remote X
External Rapid Battery Charger & Extra Batteries X

The Only Tester in the World to Support DUALmode Testing to Save Time and Labor

Save time and money by simultaneously conducting any combination of two tests with LANTEK 7G. For example, you can select a combination of channel/permanent link or CAT6a/ISO-F standards and get both test results in virtually the same amount of time as a single test. DUALmode can be used as either a troubleshooting tool or to provide an extra level of confidence to your customers by performing certification to additional test standards that demonstrate the quality of your work.

Unique Adapter Scheme Reduces Cost of Ownership

LANTEK® cable testers utilize an advanced link adapter method to reduce cost of ownership. All testers come with universal link adapters that are used for basic, channel, and permanent link testing. These channel adapters fit into the case of the unit and are locked in place. This creates a stable and repeatable testing platform while eliminating bulky adapters that extend beyond the end of the unit. Simply plug in the appropriate reference patchcord to the channel adapter, to perform permanent link testing.

Specifications

LANTEK Range Resolution Accuracy
Length (50-100 O cable) 0 â?? 2000 ft 1 ft ± (3% + 3 ft)
Delay 0 â?? 8000 ns 1 ns ± (3% + 1 ns)
Average Impedance 35 â?? 180 O 0.1 O ± (3% + 1 O)
Capacitance (Bulk) 0 â?? 100 nF 1 pF or 3 dig ± (2% + 20 pF)
Capacitance 0 â?? 100 pF/ft 0.1 pF ± (2% + 1 pF)
DC Loop Resistance 0 â?? 200 O 0.1 O ± (1% + 2 O)
Attenuation 1 MHz â?? 1 GHz 0.1 dB Level III/IIIe(Draft)/IV
NEXT 1 MHz â?? 1 GHz 0.1 dB Level III/IIIe(Draft)/IV
Return Loss 1 MHz â?? 1 GHz 0.1 dB Level III/IIIe(Draft)/IV
ELFEXT 1 MHz â?? 1 GHz 0.1 dB Level III/IIIe(Draft)/IV
Noise Floor < â??90 dB
Dynamic Range > 90 dB

LANTEK Reporter Software

LANTEK Reporter Software allows the installers to upload test results and print reports to meet customer reporting requirements. The Reporter can upload stored tests from LANTEKâ??s internal memory or compact flash card. The software is designed to produce three different kinds of reports based on the required level of detail:

  • Single Line Report â?? one line per test
  • Brief Report â?? a summary of test results with graphical report
  • Detailed Report â?? complete test results with graphs for all tests and cable pairs

Multimode Fiber Modules:

The multimode 850nm/1300nm LanTek fiber adapters are the perfect solution for certifying or troubleshooting fiber backbones and fiber to the desktop installations in commercial buildings or campus environments. Working with LANTEK® 6 & 7, it measures signal loss and length over Multimode fiber. With an easy fiber adapter switch, it can support dual wavelength and bidirectional testing.

Using adapters, the LANTEK display unit can measure length in the loop-back mode. Using it in both the display and remote units, the system can measure signal loss and length with dual wavelength and bi-directional capabilities.

Specifications:

Detector Receive Wavelength:  MM: 850 nm, 1300 nm
Measurement Accuracy 
Attenuation:  MM 850/1300 nm:  0.25dB
Length:  (+/- 3%) + 1 meter
Display Resolution 
Attenuation:  MM 850/1300 nm: 0.1dB
Length:  MM 850/1300 nm: 1.0 meter
Linearity  0.2 dB 
Length Range  MM 850 nm: 3,000 meters
MM 1300 nm: 6,000 meters
Minimum Length  5 meters 
Physical Operating Temperature: Ambient Airflow:  18 to 30°C at Specified Accuracy 0.3 Ms @ 20°C 



For full Ideal Lantek 7G MM product specifications, please click here: Ideal Lantek 7G MM
Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright 2003- AAATesters.com | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter