IDEAL LANTEK 7G SM MM Fiber Cat6 Cat6a Certfier
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Ideal LANTEK® 7G LAN Cable Certification Tester
LANTEK offers a family of high performance cable certification testers to support a full range of LAN cable testing. The LANTEK family of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making channel and permanent link certification of a cable standard such as CAT6A or ISO-F possible without changing adapters. The same patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the LANTEKs save you money and time on the job.
Features
- High-performance LANTEK 7G sweeps up to 1 GHz and supports testing requirements up to CAT 6/6a/7/ISO-F and beyond
- Level IV/IIIe/III accuracy - independently verified by ETL for baseline, channel and permanent link
- DUALmode testing to save time - reports channel and permanent link test results simultaneously
- Test with patchcords to save money - performs CAT6/5e/ISO-D/Ea testing with standard patchcords to achieve the lowest cost of ownership
- Largest internal/external memory capacity - makes record management easy
- Convenient FIBERTEKâ?¢ accessory - simultaneously tests two fibers for attenuation and length
- Innovative TRACETEKâ?¢ accessory - performs advanced fiber fault location and troubleshooting functions
FEATURES | |
Frequency Range | 1 GHz |
Supports CAT7 & ISO-F | X |
Supports CAT6a | X |
Support CAT6/5e/3 and ISO-E/D/C | X |
Accuracy Level III/IIIe (Draft)/IV verified by | ETL |
Support DUALmode Testing to Save Time | X |
Test with Patchcords to Save Money | X |
Screen Display Area | Best |
CAT6 Test Storage with Graphs | 500 |
Expansion Slots | CompactFlash Card |
Standard External Compact Flash Memory | 64MB |
USB/Serial Port | X |
Copper TDR Trace | X |
Fiber Loss Measurement (FIBERTEK) | Option |
Fiber Distance to Break (TRACETEK) | Option |
Talk over Fiber & Copper (Full Duplex) | X |
Display Screen on Remote | X |
Troubleshooting Tone Generator on Remote | X |
External Rapid Battery Charger & Extra Batteries | X |
The Only Tester in the World to Support DUALmode Testing to Save Time and Labor
Save time and money by simultaneously conducting any combination of two tests with LANTEK 7G. For example, you can select a combination of channel/permanent link or CAT6a/ISO-F standards and get both test results in virtually the same amount of time as a single test. DUALmode can be used as either a troubleshooting tool or to provide an extra level of confidence to your customers by performing certification to additional test standards that demonstrate the quality of your work.
Unique Adapter Scheme Reduces Cost of Ownership
LANTEK® cable testers utilize an advanced link adapter method to reduce cost of ownership. All testers come with universal link adapters that are used for basic, channel, and permanent link testing. These channel adapters fit into the case of the unit and are locked in place. This creates a stable and repeatable testing platform while eliminating bulky adapters that extend beyond the end of the unit. Simply plug in the appropriate reference patchcord to the channel adapter, to perform permanent link testing.
Specifications
LANTEK | Range | Resolution | Accuracy |
Length (50-100 O cable) | 0 â?? 2000 ft | 1 ft | ± (3% + 3 ft) |
Delay | 0 â?? 8000 ns | 1 ns | ± (3% + 1 ns) |
Average Impedance | 35 â?? 180 O | 0.1 O | ± (3% + 1 O) |
Capacitance (Bulk) | 0 â?? 100 nF | 1 pF or 3 dig | ± (2% + 20 pF) |
Capacitance | 0 â?? 100 pF/ft | 0.1 pF | ± (2% + 1 pF) |
DC Loop Resistance | 0 â?? 200 O | 0.1 O | ± (1% + 2 O) |
Attenuation | 1 MHz â?? 1 GHz | 0.1 dB | Level III/IIIe(Draft)/IV |
NEXT | 1 MHz â?? 1 GHz | 0.1 dB | Level III/IIIe(Draft)/IV |
Return Loss | 1 MHz â?? 1 GHz | 0.1 dB | Level III/IIIe(Draft)/IV |
ELFEXT | 1 MHz â?? 1 GHz | 0.1 dB | Level III/IIIe(Draft)/IV |
Noise Floor | < â??90 dB | ||
Dynamic Range | > 90 dB |
LANTEK Reporter Software
LANTEK Reporter Software allows the installers to upload test results and print reports to meet customer reporting requirements. The Reporter can upload stored tests from LANTEKâ??s internal memory or compact flash card. The software is designed to produce three different kinds of reports based on the required level of detail:
- Single Line Report â?? one line per test
- Brief Report â?? a summary of test results with graphical report
- Detailed Report â?? complete test results with graphs for all tests and cable pairs
Detector Receive Wavelengths: |
MM: 850 and 1300 nm SM: 1310 and 1550 nm |
Measurement Accuracy: | ±0.03 - 0.05 dB @ -20dBm |
Dynamic Range: | MM: -53 dBm SM: -53 dBm |
Fiber Type | 9.0/50/62.5/125 micron |
Detector Type: | INGaAs |
Transmitters Power Output: |
850 (MM): -3 dBm into MM Fiber 1300 (MM): -10 dBm into MM Fiber 1310 (SM): -10 dBm into SM Fiber 1550 (SM): -10 dBm into SM Fiber |
Source Type: | 850 (MM): VCSEL Laser 1300 (MM): Fabry Perot Laser 1310 (SM): Fabry Perot Laser 1550 (SM): Fabry Perot Laser |
Filtering Type | Kalman |
Signal Loss Dynamic Range (MM) Dynamic Range (SM) |
0 to -35 dB at Specified Accuracy 0 to -40 dB at Specified Accuracy |
Propagation Delay Accuracy Resolution Range |
±4% or ±2.0 ns (the greater of) ±1.2 - 1.5 ns 0 â?? 300 ms |
Cable Length Accuracy Resolution Distance Range |
±4% or ±0.3 m (the greater of) ±0.5 m 850 (MM) to 2 km 1300 (MM) to 5 km 1310 (SM) to 10 km 1550 (SM) to 10 km |
Network Specifications | 1000BASESX/LX (Gigabit Ethernet) ATM-155, ATM-622 Legacy Networks 100BASE-F 10BASE-FL, 10BASE-FL/FB, |
For full Ideal Lantek 7G SM MM product specifications, please click here: Ideal Lantek 7G SM MM
Test, Certify & Print Cat5e, Cat6, Cat6a, Singlemode Fiber & Multimode Fiber Cable Installations up to 1GHz!
Included Adapters:
- (2) IDEAL Cat6a Adapters P/N: 0012-00-0656N
- IDEAL 850 MM Fiber Adapter P/N: 0012-00-0336
- IDEAL 1300 MM Fiber Adapter P/N: 0012-00-0337
- IDEAL 1310 SM Fiber Adapter P/N: 0012-00-0338
- IDEAL 1550 SM Fiber Adapter P/N: 0012-00-0339
Includes Carrying Case & Accessories As Listed
IDEAL Lantek 7G Lantek-7G SM MM Fiber Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 6113A-L/T* 6113B-L/T*
- IDEAL Lantek 7G Main (BC# 6113A-L/T*)
- IDEAL Lantek 7G Remote (BC# 6113B-L/T*)
- IDEAL P/N: 0012-00-0642 Battery Charger w/ AC Adapter
- (2) IDEAL Cat6a Adapters P/N: 0012-00-0656N
- IDEAL 850 MM Fiber Adapter P/N: 0012-00-0336
- IDEAL 1300 MM Fiber Adapter P/N: 0012-00-0337
- IDEAL 1310 SM Fiber Adapter P/N: 0012-00-0338
- IDEAL 1550 SM Fiber Adapter P/N: 0012-00-0339
- (2) Ethernet Cables
- (2) Headset / Talksets w/ Case
- 64MB Flash Card
- (2) MM SC-ST Duplex Fiber Cables
- (2) SM ST-FC Duplex Fiber Cables
- (2) ST-ST Fiber Connectors
- (2) SC-SC Fiber Connectors
- IDEAL Data Center Software
- (2) Battery Packs
- (2) AC Adapter/Chargers
- (3) Power Cords
- RS232 PC Interface Cable
- USB PC Interface Cable
- Hard Copy User Manual
- Hard Carrying Case