IDEAL LANTEK 7 SM MM Fiber Cat5e Cat6 Certfier
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
support a full range of LAN cable testing. The LANTEK family of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making channel and permanent link certification of a cable standard such as CAT6A or ISO-F possible without changing adapters. The same patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the LANTEKs save you money and time on the job.
Features
- High-performance LANTEK 7 sweeps up to 750 MHz and supports testing requirements up to CAT 6/6a/7/ISO-F and beyond
- Level IV/IIIe/III accuracy - independently verified by ETL for baseline, channel and permanent link
- DUALmode testing to save time - reports channel and permanent link test results simultaneously
- Test with patchcords to save money - performs CAT6/5e/ISO-D/Ea testing with standard patchcords to achieve the lowest cost of ownership
- Largest internal/external memory capacity - makes record management easy
- Convenient FIBERTEKâ?¢ accessory - simultaneously tests two fibers for attenuation and length
- Innovative TRACETEKâ?¢ accessory - performs advanced fiber fault location and troubleshooting functions
FEATURES | LANTEK 7 |
Frequency Range | 750 MHz |
Supports CAT7 & ISO-F | X |
Supports CAT6a | X |
Support CAT6/5e/3 and ISO-E/D/C | X |
Accuracy Level III/IIIe (Draft)/IV verified by | ETL |
Support DUALmode Testing to Save Time | X |
Test with Patchcords to Save Money | X |
Screen Display Area | Best |
CAT6 Test Storage with Graphs | 500 |
Expansion Slots | CompactFlash Card |
Standard External Compact Flash Memory | 64MB |
USB/Serial Port | X |
Copper TDR Trace | X |
Fiber Loss Measurement (FIBERTEK) | Option |
Fiber Distance to Break (TRACETEK) | Option |
Talk over Fiber & Copper (Full Duplex) | X |
Display Screen on Remote | X |
Troubleshooting Tone Generator on Remote | X |
External Rapid Battery Charger | X |
The Only Tester in the World to Support DUALmode Testing to Save Time and Labor
Save time and money by simultaneously conducting any combination of two tests with LANTEK 7. For example, you can select a combination of channel/permanent link or CAT6a/ISO-F standards and get both test results in virtually the same amount of time as a single test. DUALmode can be used as either a troubleshooting tool or to provide an extra level of confidence to your customers by performing certification to additional test standards that demonstrate the quality of your work.
Unique Adapter Scheme Reduces Cost of Ownership
LANTEK® cable testers utilize an advanced link adapter method to reduce cost of ownership. All testers come with universal link adapters that are used for basic, channel, and permanent link testing. These channel adapters fit into the case of the unit and are locked in place. This creates a stable and repeatable testing platform while eliminating bulky adapters that extend beyond the end of the unit. Simply plug in the appropriate reference patchcord to the channel adapter, to perform permanent link testing.
Specifications
LANTEK | Range | Resolution | Accuracy |
Length (50-100 O cable) | 0 â?? 2000 ft | 1 ft | ± (3% + 3 ft) |
Delay | 0 â?? 8000 ns | 1 ns | ± (3% + 1 ns) |
Average Impedance | 35 â?? 180 O | 0.1 O | ± (3% + 1 O) |
Capacitance (Bulk) | 0 â?? 100 nF | 1 pF or 3 dig | ± (2% + 20 pF) |
Capacitance | 0 â?? 100 pF/ft | 0.1 pF | ± (2% + 1 pF) |
DC Loop Resistance | 0 â?? 200 O | 0.1 O | ± (1% + 2 O) |
Attenuation | 1 MHz â??750 MHz | 0.1 dB | Level III/IIIe(Draft)/IV |
NEXT | 1 MHz â??750 MHz | 0.1 dB | Level III/IIIe(Draft)/IV |
Return Loss | 1 MHz â??750 MHz | 0.1 dB | Level III/IIIe(Draft)/IV |
ELFEXT | 1 MHz â??750 MHz | 0.1 dB | Level III/IIIe(Draft)/IV |
Noise Floor | < â??90 dB | ||
Dynamic Range | > 90 dB |
Detector Receive Wavelengths: |
MM: 850 and 1300 nm SM: 1310 and 1550 nm |
Measurement Accuracy: | ±0.03 - 0.05 dB @ -20dBm |
Dynamic Range: | MM: -53 dBm SM: -53 dBm |
Fiber Type | 9.0/50/62.5/125 micron |
Detector Type: | INGaAs |
Transmitters Power Output: |
850 (MM): -3 dBm into MM Fiber 1300 (MM): -10 dBm into MM Fiber 1310 (SM): -10 dBm into SM Fiber 1550 (SM): -10 dBm into SM Fiber |
Source Type: | 850 (MM): VCSEL Laser 1300 (MM): Fabry Perot Laser 1310 (SM): Fabry Perot Laser 1550 (SM): Fabry Perot Laser |
Filtering Type | Kalman |
Signal Loss Dynamic Range (MM) Dynamic Range (SM) |
0 to -35 dB at Specified Accuracy 0 to -40 dB at Specified Accuracy |
Propagation Delay Accuracy Resolution Range |
±4% or ±2.0 ns (the greater of) ±1.2 - 1.5 ns 0 â?? 300 ms |
Cable Length Accuracy Resolution Distance Range |
±4% or ±0.3 m (the greater of) ±0.5 m 850 (MM) to 2 km 1300 (MM) to 5 km 1310 (SM) to 10 km 1550 (SM) to 10 km |
Network Specifications | 1000BASESX/LX (Gigabit Ethernet) ATM-155, ATM-622 Legacy Networks 100BASE-F 10BASE-FL, 10BASE-FL/FB, |
For full Ideal lantek 7 SM MM product specifications, please click here: Ideal Lantek 7 SM MM
IDEAL LanTek 7 Cat5, Cat5e, Cat6, Cat6a Digital LAN Cable Analyzer With Multimode 850nm/1300nm & Singlemode 1310nm/1550nm Fiber Adapters
Test, Certify & Print Cat5/Cat5e & Cat6/Cat6a Cable Installations up to 750Mhz!
Included Adapters:
(2) IDEAL P/N: 0012-00-0656H Cat6a High Performance Adapters
(2) IDEAL P/N: 0012-00-0629 Cat6/5e RJ45 Adapters
IDEAL P/N: 0012-00-0336 850 Multimode Fiber Adapter
IDEAL P/N: 0012-00-0337 1300 Multimode Fiber Adapter
IDEAL 0012-00-0338 1310nm Singlemode Adapter
IDEAL 0012-00-0339 1550nm Singlemode Adapter
Includes Hard Carrying Case And Accessories As Listed!
IDEAL Lantek 7 Lantek-7 SM MM Fiber Cable Certifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- IDEAL Lantek 7 Main
- IDEAL Lantek 7 Remote
- IDEAL Dual Bay Battery Charger
- (2) IDEAL P/N: 0012-00-0656H Cat6a High Performance Adapters
- (2) IDEAL P/N: 0012-00-0629 Cat6/5e RJ45 Adapters
- IDEAL P/N: 0012-00-0336 850 Multimode Fiber Adapter
- IDEAL P/N: 0012-00-0337 1300 Multimode Fiber Adapter
- IDEAL 0012-00-0338 1310nm Singlemode Adapter
- IDEAL 0012-00-0339 1550nm Singlemode Adapter
- Fiber Cables:
- (2) SM FC-FC Duplex
- (2) MM ST-ST Duplex
- Driver Software
- (2) Battery Packs
- (3) AC Adapters/Chargers
- (3) Power Cords
- RS232 PC Interface Cable
- (2) Carrying Straps
- (2) Cat6 Patch Cords
- Compact Flash PC Card Adapter
- 64MB Compact Flash Card
- Headset Talkset w/ Case
- User Manual On CD-ROM
- Hard Carrying Case